1/19
PLC
Name | Mastery | Learn | Test | Matching | Spaced |
|---|
No study sessions yet.

Signal input, electric
Provides electrical signals (switches/push buttons). Used as input in control circuits. |


Relay, three-fold
Electromagnetic switch with 3 changeover contacts. Controls multiple devices from one input. |


Limit switch, electrical, left-actuated
Detects position when actuated from left side. Used for end-position sensing.


Limit switch, electrical, right-actuated
Detects position when actuated from right side. Used for automation feedback. |


Proximity sensor, optical
Non-contact object detection using light. Used for counting or presence detection.


Electronic proximity sensor with cylinder attachment
Detects piston magnet inside cylinder. Provides stroke-end feedback.


2x3/2 way solenoid valve with LED
in one block. Controls two single-acting cylinders or air paths. |


5/2 way single solenoid valve, spring return, with LED
Directs air to extend/retract actuator. Returns automatically by spring. Used for double-acting cylinders.


5/2 way double solenoid valve with LED
5 ports, 2 positions, bistable with 2 solenoids. Controls double-acting cylinders with stable holding. |


Pressure sensor with display
Measures and displays air pressure. For monitoring pneumatic systems.


One-way flow control valve
Free flow one way, throttled opposite. Used to control cylinder speed.


Single-acting cylinder
Air-powered stroke one way, spring return. Used for ejecting, clamping, pressing. |


Double-acting cylinder
Air-powered stroke both directions. For pushing/pulling applications.


Start-up valve with filter control valve
Filters, regulates air, allows soft start-up. Ensures safe/clean air supply.


Manifold
Distributes compressed air to multiple valves. Central air distribution point.

Plastic Tubing
Connects pneumatic components. Provides compressed air flow.

Safety laboratory cables
Safe insulated connections for circuits. Used for relays, sensors, solenoids.


Power supply, 24V DC
Provides stable 24V DC power. Powers sensors, solenoids, relays


Preset counter, electronic
Counts pulses/events, outputs at preset. For piece counting/cycle counting.


Time relay, two-fold
Provides delayed switching with 2 timers. For sequential/time-based control.
