Medical Gas Alarm Systems and Testing

Flashcards based on lecture notes about alarm systems and testing procedures.

Audible and visual alarm indicators shall meet which of the following requirements

the staff should be trained to operate the test button periodically and report malfunctions

After completion of the installer-performed test, what methods are allowed to determine that no cross-connection exists?

individual pressurization only

Audible and visual alarm indicators shall meet which of the following requirements

the staff should be trained to operate the test button periodically and report malfunctions

After completion of the installer-performed test, what methods are allowed to determine that no cross-connection exists?

individual pressurization only

When testing outlets/inlets, which components must be used?

Gas-specific adapters.

In a bulk supply system, when the cryogenic liquid reserve's contents are reduced to one day's supply, which alarm system(s) shall be activated?

Master.

Which of the following is a requirement for area alarm panels?

provide visual and audible indication

How many hours must the medical air compressor system be operating normally before an air quality test can be performed?

12

The installer shows documentation that the initial pressure test for the vacuum system was conducted at 50 psi. At what pressure should the installer have performed this test?

150psi