Chapter 19 Evaluation – Apply to all chapters – Once you implement a intervention -you need to assess whether it worked or not---- equals = EVALUATE whether it worked, --- Do I need to change the intervention, do I need to modify the intervention or do I say it worked = met the evaluation -- I achieved the outcome I was looking for. Chapter 20- Read over the terminology at the beginning. Very important terms. What does it mean to document and why is it so important? What does the patient record contain? What are the characteristics of effective documentation? What is the purpose of privacy and confidentiality? What happens if you do not follow those rules? READ over Box-20-1, what does HIPAA stand for? Glance at the abbreviations but we will go over !! Delegation is important when it comes to documentation - working with Nursing assistants - must follow all policies of what NA can chart/ LVN's and what the RN will chart . Need to know job description and duties!! For quality performance improvement how important is documentation? Types /Methods of documentation - Electronic EHR records, source oriented records, problem- oriented medical records = SOAP charting , PIE, focus charting, charting by exception, . Models of charting = CASE Management, collaborative, unusually occurrence, … Nursing documentation - Assessments, care plan, patient care summary - area charting- critical care, progress notes, flow sheet=graphic record. MAR, acquity, discharge/transfer, Home health documentation AMA, Nurses reporting to each other at the change of shift = change of shift report=Handoff reports , calling doctors, transferring patients < Incident reports. Chapter 30 -Medication Chapter: Administering medications is very important- understanding terminology is first- what do all the terminology mean and why? Pharmacology, pharmokinetics, pharmacist( knowing their responsibility - Prinicipals of pharmacology what/why do we need to understand nomenclature of drugs? Generic vs. trade, What are the different types of drugs ? why is that important? What is the importance of drug classification? Again what is Drug indications mean? Versus action of drug? How do the mechanics of drugs interfer with drug action? Pharmokinetics! What does the word Bioavailability mean? What are the different types of Drug reactions and how do they differ?( adverse, allergic, toxic, idiosyncratic). What type of factors can affect Drug action: ( developmental, weight, cultural/genetic, psychological, environmental, timing)- More terminology – half life, why do we need to know that? Can you give an example of that? Peak and trough -again what is the importance of collecting a peak and trough and demonstrate or explain how to do both? Principles of medication- medications prescriptions and orders. You need to know what an order is , what is included on an order what are the details of importance about the order ( what are the components on the order). What are different types of orders and can you describe the difference of how they work? Who can write orders? Are there rules to for checking orders and questioning orders? Know your math for medication . what are the rights to medication( there are a lot but ) which are the most important up front. Now, apply the Nursing Process to this chapter- what type of problems can the patient demonstrate while starting med, taking meds or . Here is a question-"Pharmacokinetics question type" – medication administered that are renal toxic should have what frequent assessment of which blood values: WBC, Ptt, BUN , creatinine, glucose. chapter 33 Skin/wounds- What is the function of the skin, layers of the skin- after that understand why I am asking you to know those functions and sites. Because you need to think how deep and where the wound is and what it looks like. Assess the wound : type clean/dirty, acute/chronic, intentional/unintentiona. How does a wound heal: phases of healing,- look at each phase- and recognize a specific details to know about that phase. What are complications of wounds? What do they mean? And if they happen what will the nurse do to assist the patient to over come their complication. What are factors to develop wounds? What different factors that can actually create or assist in the development of a wound? What do you look for when you are ASSESSING-(patient responses)- color, size, smell, location, drainage =color-what are colors and names of drainage? , amount, smell, - terminology-maceration, evisceration, fistula, tunneling, - . Pressure wounds- what are they? how do they develop? How do you know it is a pressure wound? Are there stages of a pressure wound? How do you tell the difference- again, look at specific detail!! ( earlier I asked you about the layers of the skin)!!!! How do we take care to of pressure ulces (wounds)???? What are some Nursing Interventions that can be done by nurse to prevent pressure wounds and how do care for them once they have developed and how do we slow them down to not progress to the next stage.?? Critical think -- what is important to take care of a wound. How do help people heal a wound. Can you create a pressure wound in 1-day??What are some colors of a pressure wound? What do the colors mean? If we need to debride a wound-- what does debridement mean? What types of debridement are there? ( autolytic, mechanical, enzymatic, sharp) --How do you know a wound is infected? What does a nurse need to do to check for an infection? How do they collect a specimen. lastly , Utilizing the Nursing process in this chapter-- and referring to Chapter 15 also -- when you have skin broken--- what type of Nursing diagnosis would you use to label the patients wound response???? Look over the different type of Nursing diagnosis. How does Heat and Cold help a patient and what problems could develop from either heat or cold. Chapter-text-37 Nutrition Chapter- what is the purpose of reading the labels on store items, what is the GI tract function? What is the function of the esophagus , stomach, small intestine, large colon, rectum and anus? What does a nutrient mean? How much of fat, Carbs , protein, ? Food label look it over. Look over the PLATE Food!! Why is nutrition so important? How does it help the patient? Why is this an important intervention to assess. How do you assess a patients nutritional status? What does Positive or Negative Nitrogen Balance mean? Anorexia Nervosus means what ? Anorexia means what ? Bulemia? What is malnutrition? How much weight can you lose that is steady and good to lose? Look at some labs: Albumin, Prealbumin, Cholesterol, triglycerides, CBC, SMA7=Na+, K+, cl, co2, gluc BUN, CREAT, Mg, CA. : Types of Diet- NPO, Ice chips, clear liquid, full liquid, puree diet, mechanical diet, - renal diet, liver diet, cardiac diet- what is included in the diet ( each of these diets) ie- what can you eat to get your potassium? To give you eyes nutrition? Pharmacology Book: (enteral/Parenteral chapter)-first what is the difference between enteral and parenteral nutrition? Under Enteral Nutrition- what is a the purpose of a salem sump tube versus a soft silastic tube with a wire in it? What is the primary purpose for each tube. What is the direction of how to place an nasogastric tube in position? How do we verifiy it is in the correct position. What are some management of care towards the nasogastric tube. What are some problems/complications having a nasogastic tube. Ok , we started tube feeding, what are some complications with starting tube feeding to someone who hasn’t had any food in awhile . If there is any complications from tube feeding how do you handle them? What is Parenteral Nutrition ? What is PPN vs. TPN. What is the primary ingredient in the PPN or the TPN? What are complications with TPN nutrition? How does Enteral Nutrition compare to Parenteral (TPN) Nutrition? What are some complications from TPN nutrition? Pharmacology Book : Vitamins/minerals vitamins and minerals - fat soluble and water soluble how do they differ? What is important about each vitamin? What should you teach your patient about these meds. Which meds can be toxic? What is important about IRON, what is important about Ferrous . How did the two differ? ( read very carefully for the difference)

sandbanks dorset - intentional change case study

Chapter 6: Intentional Torts

Chapter 4: Criminal Acts and Intentional Torts

Lesson 10 - Incentives

UNIT 12 - Inventions | Quizlet

Technology, Inventions, and Science Vocabulary

Industrial Revolution: Key Concepts, Inventions, and Impact on Society

Iceberg demonstrates the relationship between direct and indirect costs of accidents, showing that on average, indirect costs exceed direct costs. Examples of indirect costs include: - a) Overhead costs - b) Schedule delays - c) **Medical costs** (DIRECT COST) - d) Cleanup time ## 7. Geometric Sequences - **Sequence Identification:** The proper arrangement of the following shapes by their complexity is: I. Quadrilateral II. Parallelogram III. Rectangle IV. Square. - a) II, IV, III, I - b) I, II, III, IV - c) IV, III, II, I - d) I, III, II, IV ## 8. Building Use Classification - The term **Occupancy** refers to a type of use of a building for interior space such as an office, restaurant, private residence, or school, grouped based on similar life-safety characteristics, fire hazards, and combustible contents. - a) Building elements - b) **Occupancy** - c) Building Code - d) Accommodation ## 9. Construction Pit Transport Fees - The maximum distance, as specified in the construction contract, which the contractor is expected to transport soil material without receiving additional payment, is known as **Freehaul distance**. - a) **Freehaul distance** - b) Overhaul distance - c) Haul distance - d) Baseline distance ## 10. Retarder Application Principles - **Fundamental Principles for Upper Retarders:** The retarder should be as near as possible to the warm side of the insulation or the warm face of the assembly. Moreover, it should be installed using a method appropriate for the specific condensation hazard. ## 11. Material Characteristics - **Hardness**: A measure of a material's ability to resist indentation or penetration. - a) **Hardness** - b) Ductility - c) Toughness - d) Resilience ## 12. Soil Density Changes - **Consolidation**: An increase in the soil density of cohesive soil resulting from the expulsion of water from the soil's void spaces. - a) Segregation - b) **Consolidation** - c) Compaction - d) Soil Stabilization ## 13. Concrete Finishing Process - The correct step-by-step process of finishing standard weight concrete slabs is as follows: 1. Bleeding 2. Screeding 3. Leveling 4. Edging 5. Jointing 6. Floating 7. Troweling 8. Broom finishing ## 14. Safety Oversight Authority - The entity given authority to review reports of inspection, accident investigations, and the implementation of the program is the **Health and Safety Committee**. - a) **Health and Safety Committee** - b) DOLE - c) DPWH - d) BFP ## 15. Soil Grouting Process - The process of injecting any agent into soil or rock to increase its strength or stability, protect foundations, or reduce groundwater is termed **Grouting**. - a) **Grouting** - b) Pumping - c) Bleeding - d) Screeding ## 16. Construction Safety Program Requirements - Every construction project must have a suitable **Construction Safety and Health Program**, which adheres to the rules and orders issued by the DOLE. - a) **Construction Safety and Health Program** - b) Occupational Health and Safety Program - c) Occupational Safety and Health Administration - d) Workplace Safety and Procedures ## 17. Safety Sight Distance and Vehicle Characteristics - One of the provisions for safety sight distance is dependent on the characteristics of the vehicle, including: - I. Type of vehicle (car or truck) - II. Friction between the tire and road - III. Eye height of the driver - IV. Speed of the vehicle - a) I only - b) II and III only - c) IV only - d) **All of the above** ## 18. Concrete Leveling Technique - **Screeding** is the process to level a floor or layer of concrete with a straight edge using a back and forth motion while moving across the surface. - a) Troweling - b) **Screeding** - c) Floating - d) Finishing ## 19. Structural Support Types - A structure driven into the soil to support construction by transferring building loads to a deeper and stronger layer of soil or rock is referred to as a **Pile**. - a) Caisson - b) Pier - c) Shoring - d) **Piles** ## 20. Road User Guidance Signs - **Guide signs** inform and advise road users of directions, distances, routes, and the location of services. - a) Cross road sign - b) **Guide signs** - c) Advance direction signs - d) Traffic instruction signs ## 21. Delay Concept in Transportation - The **Delay** refers to the difference between the actual travel time and the ideal travel time for a segment of the transportation system. - a) Queue time - b) Travel time - c) **Delay** - d) Service time ## 22. Construction Instructions - **Specifications** are written instructions detailing how a facility is to be constructed. - a) **Specifications** - b) Estimates - c) Bid documents - d) Plans ## 23. Tidal Wave Phases - The interval referring to the time delay in highest tide for each location due to cosmic forces and friction is called the **Age of Tides**. - a) **Age of Tides** - b) Lunar tide - c) Diurnal tide - d) Semi-diurnal tide ## 24. Road Environment Factors and Safety Sight Distance - The provision for safety sight distance is influenced by the following characteristics of the road environment: - I. Road geometry - II. Road surface - III. Road illumination at night - IV. Road topography - a) I and IV only - b) I, II, and III only - c) II and IV only - d) **All of the above** ## 25. Pavement Cracking Types - **Transverse cracking** occurs at right angles to the pavement centerline due to shrinkage or differential thermal stress of the asphalt concrete or reflective cracks. - a) Alligator cracking - b) Block cracking - c) **Transverse cracking** - d) Longitudinal cracking ## 26. Pavement Surface Wear - **Raveling** refers to the wearing away of the pavement surface caused by dislodging of aggregated particles and binder, often a result of insufficient asphalt binder in the mix. - a) Joint or crack spalling - b) Flushing - c) Bleeding - d) **Raveling** ## 27. Surveying Procedures - **Double centering** is a procedure in a horizontal angle layout that involves turning the angle twice and creating a line of sight for critical points. Not used on every point. ## 28. Fatigue Resistance Measure - **Fatigue resistance** is the measure of a material's ability to withstand cyclic (repeated) stresses, with the risk of fracture occurring without warning, even below yield strength. ## 29. Screeding Definition - **Screeding** is defined as the method of moving a straight-edge back and forth with a saw-like motion across the forms to finish concrete surfaces. ## 30. Hazard Definition - A **Hazard** is defined as a source or situation that poses a potential risk for harm, injury, or damage to health, property, or the environment. ## 31. Risk Definition - **Risk** is defined as a human action that deviates from commonly accepted safe procedures that may result in an accident; it requires adherence to a suitable Construction Safety and Health Program, per DOLE requirements. ## 32. Loading Zones - **Loading and unloading zone markings** must be red in color. ## 33. Project Definition - A **Project** is a series of activities with specified objectives that have defined start and end dates, monitored planning, and resource consumption, including money, labor, and equipment. - a) **All of the above** - b) I, II, IV, and V - c) I, II, and IV - d) I, III, and V ## 34. Contract Changes - The following reasons may cause a contract change, except for: - a) Unforeseen conditions - b) **Poor jobsite productivity** - c) A change in owner requirements - d) Designer omission or error ## 35. Road Condition Characteristics - Factors affecting safety sight distance based on the road environment include: - I. Road geometry-grade and curvature sight limitations - II. Road surface-sealed or unsealed, and its smoothness - III. Road illumination at night - IV. Road topography - a) I, II, and III only - b) **All of the above** - c) I, III, and IV only - d) II, III, and IV only ## 36. Structural Properties in Coastal Construction - Key structural properties vital for material selection in harbor and coastal construction include: - I. Specific gravity - II. Material strength - III. Resistance to cyclical impact loading - IV. Resistance to seismic forces - V. Material flexibility - VI. Structural size - a) I, II, and III only - b) IV, V only - c) I, III, and IV only - d) **All of the above** ## 37. Piling Definition - **Piles** are structural components driven into the soil transferring building loads to deeper and stronger soil or rock layers. ## 38. Trip Definition - A **Trip** is defined as the basic unit of travel behavior, involving movement from a single origin to a single destination, characterized by origins, destinations, purposes, and travel modes. ## 39. Signal Coordination - **Signal coordination** involves timing signals in relation to one another, allowing vehicles traveling at a determined speed to pass through successive green lights. ## 40. Rumble Strip Purpose - A **Rumble strip** is a type of thermoplastic lane marking that provides motorists with visual, audio, and motion warnings on the road. ## 41. Grade Resistance - **Grade resistance** represents the component of vehicle weight that acts parallel to an inclined surface. ## 42. Hazard Circumstances - **Hazard** refers to circumstances that deviate from standard conditions, permitting occurrences of accidents or incidents. ## 43. Demolition Area Restrictions - During demolition, no one except workers directly engaged in demolition shall enter an area within a distance equal to 1.5 times the height of the structure being demolished. ## 44. Logistic Definition - **Logistics** refers to the strategic management of resources, materials, and information to ensure efficient movement and delivery of goods and services. ## 45. Design Speed - **Design speed** refers to the maximum safe speed that can be maintained over a specified section of highway under favorable conditions governed by design features. ## 46. Bid Bond Valid Statement - A valid statement regarding a **bid bond** is that it represents costs incurred by the owner if the bidder fails to enter into a contract. - a) It pays for costs incurred by the bid deadline is mixed. - b) **It represents the costs that the owners incur if the bidder fails to enter into a contract.** - c) It represents costs incurred by subcontractors if the project is underbid. - d) It pays for office overhead costs related to a bid ## 47. Hygroscopic Material Definition - **Hygroscopic** refers to a substance that tends to absorb water from the air. ## 48. Safe Pile Capacity Data - The safe capacity of piles driven by powered hammers is based on data comprising: - I. Average penetration per blow (last six blows) - II. Energy of hammer - III. Weight of hammer - IV. Weight of pile including appurtenances - V. Coefficient of restitution based on pile weight - VI. **All of the above** ## 49. Berth Structure Definition - A **Pier** is a berth structure projecting out from the shoreline. - a) Groin - b) Wharf - c) Breakwater - d) **Pier** ## 50. Road Alignment Signs - **Chevron signs** are used to guide drivers through a change in the horizontal alignment of the road. - a) **Chevron signs** - b) Supplementary signs - c) Guide post signs - d) Delineators ## 51. Road Delineation Devices - Delineation of road alignment includes: - I. Pavement Markings - II. Signs - III. Guide Posts - IV. Reflective delineators - V. Lighting - VI. Curb or other physical devices - a) I, II, II, and IV only - b) I, II, IV, and VI only - c) I, V, V, and VI only - d) **All of the above** ## 52. Properties of Queuing Diagrams - Important properties in queuing diagrams include: - I. The slope of D(t) is the departure rate; the slope of A(t) is the arrival rate. - II. The departure rate cannot exceed the service rate or capacity of the server. It may be less. - III. Cumulative departures can never exceed cumulative arrivals. D(t) can never be above A(t) in the queuing diagram. - IV. When a queue exists, the departure rate equals the service rate. In the absence of a queue, the same rate equals the arrival rate. - V. **All of the above** ## 53. Scaffolding Capacity Brackets - Capacity requirements for all scaffolding must be: - a) At least four times its own weight - b) At least 6 times its own weight - c) At most 6 times its own weight - d) At most 5 times its own weight ## 54. Highway Driver Elements - The essential elements of highway driving are referred to as **Driving Task**, encompassing navigation, guidance, and control. - a) **Driving task** - b) Ergonomics - c) Engineering psychology - d) Range index ## 55. Protective Systems in Excavation - **Protective systems** include methods for protecting workers from cave-ins during excavations, consisting of support systems, sloping, benching systems, and shield systems. - a) **Protective system** - b) Personnel protective system - c) Fall arrest system - d) Level arrest system ## 56. Bucket Volume Definitions - **Bucket load capacity** refers to the volume contained within the bucket outline as determined by the bucket sides. - a) Plate line capacity - b) Water line capacity - c) Heap volume - d) **Bucket load capacity** ## 57. Contract Definition - A **Contract** is defined as a formal or legally binding agreement between two parties. ## 58. Toolbox Meeting Definition - A **Toolbox Meeting** is an informal group discussion that focuses on a specific safety issue, facilitating health and safety culture discussions on job sites. ## 59. Road User Directional Signs - **Guide signs** inform road users about the directions and distances to destinations on their route or intersecting roads. - a) Supplementary signs - b) **Guide signs** - c) Warning signs - d) Stack signs ## 60. Specifications Definition - **Specifications** provide detailed requirements for materials, equipment, and workmanship for projects. - a) **Specifications** - b) Bid documents - c) Estimates - d) Plans ## 61. Damping Capacity - **Damping capacity** is the measure of a material’s ability to absorb or dissipate mechanical vibrations. ## 62. Profile Drawing Definition - A **Profile** is a drawing with elevation as the vertical axis and horizontal distance measured along the centerline as the horizontal axis. ## 63. PERT CPM Network Preparation - When preparing a report on the PERT CPM network in construction, one should consider: - a) Pessimistic time network - b) Optimistic time - c) Probable time - d) **All of the above** ## 64. Post-Construction Resolution - This occurs after completion of construction and the resolution of the majority of punchlist and commissioning issues, known as the **Profile**. ## 65. Concrete Formwork Concept - **Formwork** is necessary for concrete placement to maintain shape before the concrete sets. ## 66. Benching Technique in Excavation - **Benching** is a method of protecting workers from cave-ins by creating a series of horizontal levels or steps in excavated areas. - a) **Benching** - b) Shoring - c) Shielding - d) Fall arrest system ## 67. Concrete Surface Leveling - The process of leveling a concrete surface with enough mortar after screeding is termed **Floating**. - a) **Floating** - b) Edging - c) Leveling - d) Bleeding ## 68. Control Joint Placement in Concrete - **Jointing** involves placing premolded inserts in concrete slabs to control cracking due to shrinkage, immediately after or during edging. - a) Jointing - b) Troweling - c) Leveling - d) Edging ## 69. Safety Barrier Considerations - Reasons to establish a need for safety barriers include: - I. Fore slope and back slope steepness and height - II. Unforgiving hazards within the clear zone - III. Water hazards within the clear zone - a) II only - b) I only - c) II and III only - d) **All of the three** ## 70. Limits on Road Messages - Messages painted on pavement should be limited to **six words or less**. - a) **six words or less** - b) five words or less - c) four words or less - d) three words or less ## 71. Types of Pavement Markings - The four types of pavement and curb markings include: - a) **longitudinal lines, transverse lines, lane lines, and center lines** - b) longitudinal lines, transverse lines, stop lines, & center lines - c) longitudinal lines, transverse lines, transition lines, & stop lines - d) longitudinal lines, transverse lines, other lines, & other markings ## 72. Overtaking Lane Design Considerations - Design considerations for overtaking and climbing lanes include: - I. Initial diverge taper - II. Auxiliary lane length - III. End or merge taper - a) **I, II, & III** - b) I & II only - c) II & III only - d) I & III only ## 73. Road Density Definition - **Density** is defined as the number of vehicles per unit distance occupying a roadway section at a given instant in time, measured in vehicles per mile or kilometer. - a) flow - b) **density** - c) capacity - d) volume ## 74. Continuous Waterfront Structure - A **Wharf** is a continuous structure built parallel to the shoreline for loading and unloading ships. - a) pier - b) **wharf** - c) port - d) lighthouse ## 75. Vertical Design Factors - The minimum **K value** for sag vertical should be based on the following factors: - I. Safety sight distance for drivers - II. Appearance in low fill and flat areas - III. Riding comfort, especially at floodway approaches - IV. Vertical alignment fitting into natural terrain. - a) I, II, & III only - b) I, III, & IV only - c) I, II, & IV only - d) II, III, & IV only ## 76. Rumble Strip Definition - A **Rumble strip** is a thermoplastic lane marking designed for visual, audio, and motion warnings for motorists on the road. - a) regulatory signs - b) diagonal marking - c) chevron marking - d) **rumble strip** ## 77. Lane Line Continuation Rules - Lane lines must not be continued in the following scenarios: - I. Across signalized intersections, where low priority road lines must be discontinued. - II. Across side street entrances, except for one-way streets. - III. Past the start of the taper at multi-lane road narrows. - IV. On roads with more than two lanes without median islands. - a) I, II, & IV - b). I, II, & IV - c) II, III, & IV - d) I, II, and III ## 78. Directional Information Signs - **Guide signs** serve to inform road users about directions, distances to destinations, and service locations. - a) **guide signs** - b) warning signs - c) regulatory sign - d) traffic sign ## 79. Benefits of Shoulder Paving - **Shoulder paving** offers: - I. Integrity of the pavement - II. Width for edge line pavement markings - III. Enhanced safety to prevent vehicle skidding - IV. Lower maintenance costs compared to paved shoulders - a) I, III, & IV only - b) **all of the above** - c) I, II, & III only - d) II, III, & IV only ## 80. Structures Built into the Sea - A **Pier** is defined as a structure built into the sea but not aligned parallel to the coastline, which serves various purposes for vessels. - a) lighthouse - b) port - c) **pier** - d) wharf ## 81. Navigable Water Definitions - A navigable body of water leading to a harbor is referred to as a **Channel**. - a) fairway - b) **channel** - c) shoal - d) significant depth ## 82. Types of Curves in Roads - **Vertical curves** are typically parabolas centered around the point of intersection of vertical tangents they connect. - a) **vertical curve** - b) vertical tangent - c) spiral curve - d) grade ## 83. Wind-Generated Waves - Waves under wind influence are referred to as **Sea waves**. - A. Wakes - B. **Sea** - C. Swells - D. Seiching ## 84. Traffic Flow Rate - The **Capacity** refers to the maximum sustained rate of flow for vehicles (passenger cars per hour per lane) under uniform conditions on a freeway segment. - A. Density - B. Traffic flow - C. **Capacity** - D. Design hourly volume ## 85. Hazardous Condition Warnings - **Warning signs** inform road users about hazardous or unexpected road conditions. - A. Roadwork signs - B. **Warning signs** - C. Traffic signs - D. Guide signs ## 86. Purpose of Edge Lines - The purpose of **edge lines** includes discouraging shoulder travel, enhancing safety at night, guiding past hazards, and delineating the edge of the traveled way from the shoulder. - A. I - B. IV - C. V - D. II ## 87. Road Capacity Measurement - **Road capacity** is the maximum number of vehicles expected to pass over a given section of a roadway in one direction during one hour. - A. **Road capacity** - B. Flow of traffic - C. Density - D. Free flow ## 88. High-Rise Building Cleaners - For window cleaners of high-rise buildings, **Slung Scaffold** is most appropriate for providing a suspended working platform. - a) Birdcage Scaffold - b) **Slung Scaffold** - c) Cantilever Scaffold - d) Trestle Scaffold ## 89. Leading Workplace Fatalities - **Falls** are the leading cause accounting for more than 50% of workplace fatalities. - a) Slips - b) Trips - c) **Falls** - d) Electrocution ## 90. Excavation Material Placement - Excavated material should be kept from the excavation edge at a distance not less than **1/4** of the excavation depth. - a) **1/4** - b) 1/3 - c) 1/2 - d) 2/3 ## 91. Temporary Vertical Support Definition - **Dead Shore** refers to temporary vertical support installed directly beneath structural elements while repairs or foundation work is conducted. - A. **Dead Shore** - B. Lateral Bracing - C. Cantilever Prop - D. Raking Shore ## 92. Building Information Modeling - **Building Information Modeling** (BIM) is a 3D model-driven process generating a digital representation of facility features, supporting informed decision-making throughout its lifecycle. - A. CAD Drafting - B. **Building Information Modeling** - C. GIS Mapping - D. Structural Analysis Software ## 93. Operating Costs in Contracting - **Operating Cost** refers to expenses incurred while using equipment for project execution, including repair costs, parts replacement, fuels, labor, and storage. - A. I, II, III, IV - B. I, II, III, IV, V - C. I, II, III - D. II, III, IV ## 94. Water Supply Pipe Terminology - In a water supply system, the vertical pipes are referred to as **risers**, and the horizontal pipes as **branches**. - A. branches and risers respectively - B. **risers and branches respectively** - C. roughing ins and connections respectively - D. connections and roughing ins respectively ## 95. Joint Sealant Definition - A **Joint Sealant** is a rubber or rubber-like material used to fill and seal joints or openings, either alone or with other materials. - A. Grout - B. **Joint Sealant** - C. Adhesive - D. Mortar ## 96. Demolition Area Entry Restriction - During demolition, no one except those engaged in the work shall enter an area within a distance of **1.5 times the height** of the structure being demolished. - A. 1.2 times the height of the structure - B. 2.0 times the height of the structure - C. **1.5 times the height of the structure** - D. 3.0 times the height of the structure ## 97. Vertical Pipe Definition - A **Riser** is a vertical pipe used to transport fluids between different floors of a building. - A. Drain - B. Conduit - C. **Riser** - D. Vent ## 98. Plan View Definition - A **Plan View** is a scaled drawing representing the layout of a structure as seen from above, detailing the arrangement of spaces, walls, and features. - A. **Plan View** - B. Section View - C. Isometric View - D. Elevation View ## 99. Corrosion-Resistant Coating - **Epoxy** is a common protective coating for enhancing corrosion resistance and durability of pipes and appliances. - A. **Epoxy** - B. Latex - C. Polyurethane - D. Acrylic ## 100. Surveying Type Acknowledgment - **Geodetic Surveying** is the type of surveying that takes the curvature of the Earth into account. - A. **Geodetic Surveying** - B. Plane Surveying - C. Topographic Surveying - D. Hydrographic Surveying ## 101. Competency Standards Defined - **Competency Standards** define the required skills, knowledge, and attitudes necessary for effective job performance in the workplace. - A. Work Ethics - B. **Competency Standards** - C. Training Manuals - D. Job Description ## 102. Concrete Retarder Example - A commonly used chemical compound as a retarder in concrete is **Calcium lignosulphonate**. - A. Calcium chloride - B. Aluminum powder - C. Potassium carbonate - D. **Calcium lignosulphonate** ## 103. Sub-base Thickness Determination - The minimum thickness for one layer of compacted granular sub-base should be **20 cm**. - A. 10 cm - B. **20 cm** - C. 15 cm - D. 12 cm ## 104. Hazard Control Classification - The type of hazard control that involves replacing a toxic or hazardous material with a less harmful one is termed **Substitution**. - A. **Substitution** - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control

Iceberg demonstrates the relationship between direct and indirect costs of accidents, showing that on average, indirect costs exceed direct costs. Examples of indirect costs include: - a) Overhead costs - b) Schedule delays - c) **Medical costs** (DIRECT COST) - d) Cleanup time ## 7. Geometric Sequences - **Sequence Identification:** The proper arrangement of the following shapes by their complexity is: I. Quadrilateral II. Parallelogram III. Rectangle IV. Square. - a) II, IV, III, I - b) I, II, III, IV - c) IV, III, II, I - d) I, III, II, IV ## 8. Building Use Classification - The term **Occupancy** refers to a type of use of a building for interior space such as an office, restaurant, private residence, or school, grouped based on similar life-safety characteristics, fire hazards, and combustible contents. - a) Building elements - b) **Occupancy** - c) Building Code - d) Accommodation ## 9. Construction Pit Transport Fees - The maximum distance, as specified in the construction contract, which the contractor is expected to transport soil material without receiving additional payment, is known as **Freehaul distance**. - a) **Freehaul distance** - b) Overhaul distance - c) Haul distance - d) Baseline distance ## 10. Retarder Application Principles - **Fundamental Principles for Upper Retarders:** The retarder should be as near as possible to the warm side of the insulation or the warm face of the assembly. Moreover, it should be installed using a method appropriate for the specific condensation hazard. ## 11. Material Characteristics - **Hardness**: A measure of a material's ability to resist indentation or penetration. - a) **Hardness** - b) Ductility - c) Toughness - d) Resilience ## 12. Soil Density Changes - **Consolidation**: An increase in the soil density of cohesive soil resulting from the expulsion of water from the soil's void spaces. - a) Segregation - b) **Consolidation** - c) Compaction - d) Soil Stabilization ## 13. Concrete Finishing Process - The correct step-by-step process of finishing standard weight concrete slabs is as follows: 1. Bleeding 2. Screeding 3. Leveling 4. Edging 5. Jointing 6. Floating 7. Troweling 8. Broom finishing ## 14. Safety Oversight Authority - The entity given authority to review reports of inspection, accident investigations, and the implementation of the program is the **Health and Safety Committee**. - a) **Health and Safety Committee** - b) DOLE - c) DPWH - d) BFP ## 15. Soil Grouting Process - The process of injecting any agent into soil or rock to increase its strength or stability, protect foundations, or reduce groundwater is termed **Grouting**. - a) **Grouting** - b) Pumping - c) Bleeding - d) Screeding ## 16. Construction Safety Program Requirements - Every construction project must have a suitable **Construction Safety and Health Program**, which adheres to the rules and orders issued by the DOLE. - a) **Construction Safety and Health Program** - b) Occupational Health and Safety Program - c) Occupational Safety and Health Administration - d) Workplace Safety and Procedures ## 17. Safety Sight Distance and Vehicle Characteristics - One of the provisions for safety sight distance is dependent on the characteristics of the vehicle, including: - I. Type of vehicle (car or truck) - II. Friction between the tire and road - III. Eye height of the driver - IV. Speed of the vehicle - a) I only - b) II and III only - c) IV only - d) **All of the above** ## 18. Concrete Leveling Technique - **Screeding** is the process to level a floor or layer of concrete with a straight edge using a back and forth motion while moving across the surface. - a) Troweling - b) **Screeding** - c) Floating - d) Finishing ## 19. Structural Support Types - A structure driven into the soil to support construction by transferring building loads to a deeper and stronger layer of soil or rock is referred to as a **Pile**. - a) Caisson - b) Pier - c) Shoring - d) **Piles** ## 20. Road User Guidance Signs - **Guide signs** inform and advise road users of directions, distances, routes, and the location of services. - a) Cross road sign - b) **Guide signs** - c) Advance direction signs - d) Traffic instruction signs ## 21. Delay Concept in Transportation - The **Delay** refers to the difference between the actual travel time and the ideal travel time for a segment of the transportation system. - a) Queue time - b) Travel time - c) **Delay** - d) Service time ## 22. Construction Instructions - **Specifications** are written instructions detailing how a facility is to be constructed. - a) **Specifications** - b) Estimates - c) Bid documents - d) Plans ## 23. Tidal Wave Phases - The interval referring to the time delay in highest tide for each location due to cosmic forces and friction is called the **Age of Tides**. - a) **Age of Tides** - b) Lunar tide - c) Diurnal tide - d) Semi-diurnal tide ## 24. Road Environment Factors and Safety Sight Distance - The provision for safety sight distance is influenced by the following characteristics of the road environment: - I. Road geometry - II. Road surface - III. Road illumination at night - IV. Road topography - a) I and IV only - b) I, II, and III only - c) II and IV only - d) **All of the above** ## 25. Pavement Cracking Types - **Transverse cracking** occurs at right angles to the pavement centerline due to shrinkage or differential thermal stress of the asphalt concrete or reflective cracks. - a) Alligator cracking - b) Block cracking - c) **Transverse cracking** - d) Longitudinal cracking ## 26. Pavement Surface Wear - **Raveling** refers to the wearing away of the pavement surface caused by dislodging of aggregated particles and binder, often a result of insufficient asphalt binder in the mix. - a) Joint or crack spalling - b) Flushing - c) Bleeding - d) **Raveling** ## 27. Surveying Procedures - **Double centering** is a procedure in a horizontal angle layout that involves turning the angle twice and creating a line of sight for critical points. Not used on every point. ## 28. Fatigue Resistance Measure - **Fatigue resistance** is the measure of a material's ability to withstand cyclic (repeated) stresses, with the risk of fracture occurring without warning, even below yield strength. ## 29. Screeding Definition - **Screeding** is defined as the method of moving a straight-edge back and forth with a saw-like motion across the forms to finish concrete surfaces. ## 30. Hazard Definition - A **Hazard** is defined as a source or situation that poses a potential risk for harm, injury, or damage to health, property, or the environment. ## 31. Risk Definition - **Risk** is defined as a human action that deviates from commonly accepted safe procedures that may result in an accident; it requires adherence to a suitable Construction Safety and Health Program, per DOLE requirements. ## 32. Loading Zones - **Loading and unloading zone markings** must be red in color. ## 33. Project Definition - A **Project** is a series of activities with specified objectives that have defined start and end dates, monitored planning, and resource consumption, including money, labor, and equipment. - a) **All of the above** - b) I, II, IV, and V - c) I, II, and IV - d) I, III, and V ## 34. Contract Changes - The following reasons may cause a contract change, except for: - a) Unforeseen conditions - b) **Poor jobsite productivity** - c) A change in owner requirements - d) Designer omission or error ## 35. Road Condition Characteristics - Factors affecting safety sight distance based on the road environment include: - I. Road geometry-grade and curvature sight limitations - II. Road surface-sealed or unsealed, and its smoothness - III. Road illumination at night - IV. Road topography - a) I, II, and III only - b) **All of the above** - c) I, III, and IV only - d) II, III, and IV only ## 36. Structural Properties in Coastal Construction - Key structural properties vital for material selection in harbor and coastal construction include: - I. Specific gravity - II. Material strength - III. Resistance to cyclical impact loading - IV. Resistance to seismic forces - V. Material flexibility - VI. Structural size - a) I, II, and III only - b) IV, V only - c) I, III, and IV only - d) **All of the above** ## 37. Piling Definition - **Piles** are structural components driven into the soil transferring building loads to deeper and stronger soil or rock layers. ## 38. Trip Definition - A **Trip** is defined as the basic unit of travel behavior, involving movement from a single origin to a single destination, characterized by origins, destinations, purposes, and travel modes. ## 39. Signal Coordination - **Signal coordination** involves timing signals in relation to one another, allowing vehicles traveling at a determined speed to pass through successive green lights. ## 40. Rumble Strip Purpose - A **Rumble strip** is a type of thermoplastic lane marking that provides motorists with visual, audio, and motion warnings on the road. ## 41. Grade Resistance - **Grade resistance** represents the component of vehicle weight that acts parallel to an inclined surface. ## 42. Hazard Circumstances - **Hazard** refers to circumstances that deviate from standard conditions, permitting occurrences of accidents or incidents. ## 43. Demolition Area Restrictions - During demolition, no one except workers directly engaged in demolition shall enter an area within a distance equal to 1.5 times the height of the structure being demolished. ## 44. Logistic Definition - **Logistics** refers to the strategic management of resources, materials, and information to ensure efficient movement and delivery of goods and services. ## 45. Design Speed - **Design speed** refers to the maximum safe speed that can be maintained over a specified section of highway under favorable conditions governed by design features. ## 46. Bid Bond Valid Statement - A valid statement regarding a **bid bond** is that it represents costs incurred by the owner if the bidder fails to enter into a contract. - a) It pays for costs incurred by the bid deadline is mixed. - b) **It represents the costs that the owners incur if the bidder fails to enter into a contract.** - c) It represents costs incurred by subcontractors if the project is underbid. - d) It pays for office overhead costs related to a bid ## 47. Hygroscopic Material Definition - **Hygroscopic** refers to a substance that tends to absorb water from the air. ## 48. Safe Pile Capacity Data - The safe capacity of piles driven by powered hammers is based on data comprising: - I. Average penetration per blow (last six blows) - II. Energy of hammer - III. Weight of hammer - IV. Weight of pile including appurtenances - V. Coefficient of restitution based on pile weight - VI. **All of the above** ## 49. Berth Structure Definition - A **Pier** is a berth structure projecting out from the shoreline. - a) Groin - b) Wharf - c) Breakwater - d) **Pier** ## 50. Road Alignment Signs - **Chevron signs** are used to guide drivers through a change in the horizontal alignment of the road. - a) **Chevron signs** - b) Supplementary signs - c) Guide post signs - d) Delineators ## 51. Road Delineation Devices - Delineation of road alignment includes: - I. Pavement Markings - II. Signs - III. Guide Posts - IV. Reflective delineators - V. Lighting - VI. Curb or other physical devices - a) I, II, II, and IV only - b) I, II, IV, and VI only - c) I, V, V, and VI only - d) **All of the above** ## 52. Properties of Queuing Diagrams - Important properties in queuing diagrams include: - I. The slope of D(t) is the departure rate; the slope of A(t) is the arrival rate. - II. The departure rate cannot exceed the service rate or capacity of the server. It may be less. - III. Cumulative departures can never exceed cumulative arrivals. D(t) can never be above A(t) in the queuing diagram. - IV. When a queue exists, the departure rate equals the service rate. In the absence of a queue, the same rate equals the arrival rate. - V. **All of the above** ## 53. Scaffolding Capacity Brackets - Capacity requirements for all scaffolding must be: - a) At least four times its own weight - b) At least 6 times its own weight - c) At most 6 times its own weight - d) At most 5 times its own weight ## 54. Highway Driver Elements - The essential elements of highway driving are referred to as **Driving Task**, encompassing navigation, guidance, and control. - a) **Driving task** - b) Ergonomics - c) Engineering psychology - d) Range index ## 55. Protective Systems in Excavation - **Protective systems** include methods for protecting workers from cave-ins during excavations, consisting of support systems, sloping, benching systems, and shield systems. - a) **Protective system** - b) Personnel protective system - c) Fall arrest system - d) Level arrest system ## 56. Bucket Volume Definitions - **Bucket load capacity** refers to the volume contained within the bucket outline as determined by the bucket sides. - a) Plate line capacity - b) Water line capacity - c) Heap volume - d) **Bucket load capacity** ## 57. Contract Definition - A **Contract** is defined as a formal or legally binding agreement between two parties. ## 58. Toolbox Meeting Definition - A **Toolbox Meeting** is an informal group discussion that focuses on a specific safety issue, facilitating health and safety culture discussions on job sites. ## 59. Road User Directional Signs - **Guide signs** inform road users about the directions and distances to destinations on their route or intersecting roads. - a) Supplementary signs - b) **Guide signs** - c) Warning signs - d) Stack signs ## 60. Specifications Definition - **Specifications** provide detailed requirements for materials, equipment, and workmanship for projects. - a) **Specifications** - b) Bid documents - c) Estimates - d) Plans ## 61. Damping Capacity - **Damping capacity** is the measure of a material’s ability to absorb or dissipate mechanical vibrations. ## 62. Profile Drawing Definition - A **Profile** is a drawing with elevation as the vertical axis and horizontal distance measured along the centerline as the horizontal axis. ## 63. PERT CPM Network Preparation - When preparing a report on the PERT CPM network in construction, one should consider: - a) Pessimistic time network - b) Optimistic time - c) Probable time - d) **All of the above** ## 64. Post-Construction Resolution - This occurs after completion of construction and the resolution of the majority of punchlist and commissioning issues, known as the **Profile**. ## 65. Concrete Formwork Concept - **Formwork** is necessary for concrete placement to maintain shape before the concrete sets. ## 66. Benching Technique in Excavation - **Benching** is a method of protecting workers from cave-ins by creating a series of horizontal levels or steps in excavated areas. - a) **Benching** - b) Shoring - c) Shielding - d) Fall arrest system ## 67. Concrete Surface Leveling - The process of leveling a concrete surface with enough mortar after screeding is termed **Floating**. - a) **Floating** - b) Edging - c) Leveling - d) Bleeding ## 68. Control Joint Placement in Concrete - **Jointing** involves placing premolded inserts in concrete slabs to control cracking due to shrinkage, immediately after or during edging. - a) Jointing - b) Troweling - c) Leveling - d) Edging ## 69. Safety Barrier Considerations - Reasons to establish a need for safety barriers include: - I. Fore slope and back slope steepness and height - II. Unforgiving hazards within the clear zone - III. Water hazards within the clear zone - a) II only - b) I only - c) II and III only - d) **All of the three** ## 70. Limits on Road Messages - Messages painted on pavement should be limited to **six words or less**. - a) **six words or less** - b) five words or less - c) four words or less - d) three words or less ## 71. Types of Pavement Markings - The four types of pavement and curb markings include: - a) **longitudinal lines, transverse lines, lane lines, and center lines** - b) longitudinal lines, transverse lines, stop lines, & center lines - c) longitudinal lines, transverse lines, transition lines, & stop lines - d) longitudinal lines, transverse lines, other lines, & other markings ## 72. Overtaking Lane Design Considerations - Design considerations for overtaking and climbing lanes include: - I. Initial diverge taper - II. Auxiliary lane length - III. End or merge taper - a) **I, II, & III** - b) I & II only - c) II & III only - d) I & III only ## 73. Road Density Definition - **Density** is defined as the number of vehicles per unit distance occupying a roadway section at a given instant in time, measured in vehicles per mile or kilometer. - a) flow - b) **density** - c) capacity - d) volume ## 74. Continuous Waterfront Structure - A **Wharf** is a continuous structure built parallel to the shoreline for loading and unloading ships. - a) pier - b) **wharf** - c) port - d) lighthouse ## 75. Vertical Design Factors - The minimum **K value** for sag vertical should be based on the following factors: - I. Safety sight distance for drivers - II. Appearance in low fill and flat areas - III. Riding comfort, especially at floodway approaches - IV. Vertical alignment fitting into natural terrain. - a) I, II, & III only - b) I, III, & IV only - c) I, II, & IV only - d) II, III, & IV only ## 76. Rumble Strip Definition - A **Rumble strip** is a thermoplastic lane marking designed for visual, audio, and motion warnings for motorists on the road. - a) regulatory signs - b) diagonal marking - c) chevron marking - d) **rumble strip** ## 77. Lane Line Continuation Rules - Lane lines must not be continued in the following scenarios: - I. Across signalized intersections, where low priority road lines must be discontinued. - II. Across side street entrances, except for one-way streets. - III. Past the start of the taper at multi-lane road narrows. - IV. On roads with more than two lanes without median islands. - a) I, II, & IV - b). I, II, & IV - c) II, III, & IV - d) I, II, and III ## 78. Directional Information Signs - **Guide signs** serve to inform road users about directions, distances to destinations, and service locations. - a) **guide signs** - b) warning signs - c) regulatory sign - d) traffic sign ## 79. Benefits of Shoulder Paving - **Shoulder paving** offers: - I. Integrity of the pavement - II. Width for edge line pavement markings - III. Enhanced safety to prevent vehicle skidding - IV. Lower maintenance costs compared to paved shoulders - a) I, III, & IV only - b) **all of the above** - c) I, II, & III only - d) II, III, & IV only ## 80. Structures Built into the Sea - A **Pier** is defined as a structure built into the sea but not aligned parallel to the coastline, which serves various purposes for vessels. - a) lighthouse - b) port - c) **pier** - d) wharf ## 81. Navigable Water Definitions - A navigable body of water leading to a harbor is referred to as a **Channel**. - a) fairway - b) **channel** - c) shoal - d) significant depth ## 82. Types of Curves in Roads - **Vertical curves** are typically parabolas centered around the point of intersection of vertical tangents they connect. - a) **vertical curve** - b) vertical tangent - c) spiral curve - d) grade ## 83. Wind-Generated Waves - Waves under wind influence are referred to as **Sea waves**. - A. Wakes - B. **Sea** - C. Swells - D. Seiching ## 84. Traffic Flow Rate - The **Capacity** refers to the maximum sustained rate of flow for vehicles (passenger cars per hour per lane) under uniform conditions on a freeway segment. - A. Density - B. Traffic flow - C. **Capacity** - D. Design hourly volume ## 85. Hazardous Condition Warnings - **Warning signs** inform road users about hazardous or unexpected road conditions. - A. Roadwork signs - B. **Warning signs** - C. Traffic signs - D. Guide signs ## 86. Purpose of Edge Lines - The purpose of **edge lines** includes discouraging shoulder travel, enhancing safety at night, guiding past hazards, and delineating the edge of the traveled way from the shoulder. - A. I - B. IV - C. V - D. II ## 87. Road Capacity Measurement - **Road capacity** is the maximum number of vehicles expected to pass over a given section of a roadway in one direction during one hour. - A. **Road capacity** - B. Flow of traffic - C. Density - D. Free flow ## 88. High-Rise Building Cleaners - For window cleaners of high-rise buildings, **Slung Scaffold** is most appropriate for providing a suspended working platform. - a) Birdcage Scaffold - b) **Slung Scaffold** - c) Cantilever Scaffold - d) Trestle Scaffold ## 89. Leading Workplace Fatalities - **Falls** are the leading cause accounting for more than 50% of workplace fatalities. - a) Slips - b) Trips - c) **Falls** - d) Electrocution ## 90. Excavation Material Placement - Excavated material should be kept from the excavation edge at a distance not less than **1/4** of the excavation depth. - a) **1/4** - b) 1/3 - c) 1/2 - d) 2/3 ## 91. Temporary Vertical Support Definition - **Dead Shore** refers to temporary vertical support installed directly beneath structural elements while repairs or foundation work is conducted. - A. **Dead Shore** - B. Lateral Bracing - C. Cantilever Prop - D. Raking Shore ## 92. Building Information Modeling - **Building Information Modeling** (BIM) is a 3D model-driven process generating a digital representation of facility features, supporting informed decision-making throughout its lifecycle. - A. CAD Drafting - B. **Building Information Modeling** - C. GIS Mapping - D. Structural Analysis Software ## 93. Operating Costs in Contracting - **Operating Cost** refers to expenses incurred while using equipment for project execution, including repair costs, parts replacement, fuels, labor, and storage. - A. I, II, III, IV - B. I, II, III, IV, V - C. I, II, III - D. II, III, IV ## 94. Water Supply Pipe Terminology - In a water supply system, the vertical pipes are referred to as **risers**, and the horizontal pipes as **branches**. - A. branches and risers respectively - B. **risers and branches respectively** - C. roughing ins and connections respectively - D. connections and roughing ins respectively ## 95. Joint Sealant Definition - A **Joint Sealant** is a rubber or rubber-like material used to fill and seal joints or openings, either alone or with other materials. - A. Grout - B. **Joint Sealant** - C. Adhesive - D. Mortar ## 96. Demolition Area Entry Restriction - During demolition, no one except those engaged in the work shall enter an area within a distance of **1.5 times the height** of the structure being demolished. - A. 1.2 times the height of the structure - B. 2.0 times the height of the structure - C. **1.5 times the height of the structure** - D. 3.0 times the height of the structure ## 97. Vertical Pipe Definition - A **Riser** is a vertical pipe used to transport fluids between different floors of a building. - A. Drain - B. Conduit - C. **Riser** - D. Vent ## 98. Plan View Definition - A **Plan View** is a scaled drawing representing the layout of a structure as seen from above, detailing the arrangement of spaces, walls, and features. - A. **Plan View** - B. Section View - C. Isometric View - D. Elevation View ## 99. Corrosion-Resistant Coating - **Epoxy** is a common protective coating for enhancing corrosion resistance and durability of pipes and appliances. - A. **Epoxy** - B. Latex - C. Polyurethane - D. Acrylic ## 100. Surveying Type Acknowledgment - **Geodetic Surveying** is the type of surveying that takes the curvature of the Earth into account. - A. **Geodetic Surveying** - B. Plane Surveying - C. Topographic Surveying - D. Hydrographic Surveying ## 101. Competency Standards Defined - **Competency Standards** define the required skills, knowledge, and attitudes necessary for effective job performance in the workplace. - A. Work Ethics - B. **Competency Standards** - C. Training Manuals - D. Job Description ## 102. Concrete Retarder Example - A commonly used chemical compound as a retarder in concrete is **Calcium lignosulphonate**. - A. Calcium chloride - B. Aluminum powder - C. Potassium carbonate - D. **Calcium lignosulphonate** ## 103. Sub-base Thickness Determination - The minimum thickness for one layer of compacted granular sub-base should be **20 cm**. - A. 10 cm - B. **20 cm** - C. 15 cm - D. 12 cm ## 104. Hazard Control Classification - The type of hazard control that involves replacing a toxic or hazardous material with a less harmful one is termed **Substitution**. - A. **Substitution** - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control

Industrial Revolution: Key Concepts, Inventions, and Impact on Society

Industrial Revolution: Key Events, Inventions, and Social Impact

Chapter 6 - Incentive Motivation

Vocabulary: The man who invented the future (Text 8)

Lesson 4: Using Intent in Services and Notification

life changing inventions

MIDTERM | Activities and Intents | MST

Incidental Vocabulary List #14

Unit 2: Science and invention

PARTS OF AN INTENT