35020 Wiring Materials - Raceways & Boxes

A(n) is a metal or nonmetallic enclosed channel for conductors.

A(n) ________ is a metal or nonmetallic enclosed channel for conductors.

Article 100: Raceway

A(n) ________ is a short piece of conduit or tubing that does not exceed 24" in lengths.

Nipple

A total run of PVC shall not exceed _________deg of bends.

Art 352.26: 360deg

A(n) ________ assembly is a surface, flush, or freestanding raceway that contains conductors and receptacles.

Art 380: Multioutlet

A(n) ________ is a metallic or nonmetallic trough with a hinged or removable cover designed to house and protect conductors and cables.

Art 376 & 378: Wireway

Aluminum fittings and enclosures shall not be used with RMC.

Art 344.14: FALSE

AC cable shall be installed at least 3/4" back from the finished edge of framing members.

Art 300.4(D): FALSE

MC cable with a smooth sheath shall have a bending radius of a minimum of 10 times the diameter of the cable.

Art 330.24(A)(1): TRUE

The use of NM cable in any building or structure designated in NFPA 220 as Type I or II is prohibited unless the NM cables are installed in raceways that are permitted in Type I and II construction.

Art 334.10(5): TRUE

A trolley busway has an open bottom.

Art 368: TRUE

A(n) ________ type conduit body has a hub at both ends.

Art 314.29: C Type

Type USE cable is listed for direct burial.

Art 338.10?: TRUE

An auxiliary gutter shall not extend more than ________' beyond the equipment it supplements.

Art 336.12: 30'

A(n) ________ is a double bend in a raceway.

Art 352.24: Offset

MC Cables is a factory assembly of ________ or more conductors.

Art 330: One

Type NM cable has a flame-retardant and moisture-resistance outer jacket that is restricted to indoor wiring.

Art 334.10: TRUE

Cable tray systems shall be installed as complete systems.

Art 392.18: TRUE

Busways shall be used for indoor work only.

Art 368.10: FALSE

A(n) ________ is any point in the electrical system where current supplies utilization equipment.

Art 100: Outlet

A(n) ________ box is a box in which splices, taps, or terminations are made.

Art 314.70: Junction

You can also click the terms or definitions to blur or reveal them

A(n) is a short piece of conduit or tubing that does not exceed 24" in lengths.
*Nipple

A total run of PVC shall not exceed _deg of bends.
*Art 352.26: 360deg

A(n) ________ is a metal or nonmetallic enclosed channel for conductors.

Article 100: Raceway

A(n) ________ is a short piece of conduit or tubing that does not exceed 24" in lengths.

Nipple

A total run of PVC shall not exceed _________deg of bends.

Art 352.26: 360deg

A(n) ________ assembly is a surface, flush, or freestanding raceway that contains conductors and receptacles.

Art 380: Multioutlet

A(n) ________ is a metallic or nonmetallic trough with a hinged or removable cover designed to house and protect conductors and cables.

Art 376 & 378: Wireway

Aluminum fittings and enclosures shall not be used with RMC.

Art 344.14: FALSE

AC cable shall be installed at least 3/4" back from the finished edge of framing members.

Art 300.4(D): FALSE

MC cable with a smooth sheath shall have a bending radius of a minimum of 10 times the diameter of the cable.

Art 330.24(A)(1): TRUE

The use of NM cable in any building or structure designated in NFPA 220 as Type I or II is prohibited unless the NM cables are installed in raceways that are permitted in Type I and II construction.

Art 334.10(5): TRUE

A trolley busway has an open bottom.

Art 368: TRUE

A(n) ________ type conduit body has a hub at both ends.

Art 314.29: C Type

Type USE cable is listed for direct burial.

Art 338.10?: TRUE

An auxiliary gutter shall not extend more than ________' beyond the equipment it supplements.

Art 336.12: 30'

A(n) ________ is a double bend in a raceway.

Art 352.24: Offset

MC Cables is a factory assembly of ________ or more conductors.

Art 330: One

Type NM cable has a flame-retardant and moisture-resistance outer jacket that is restricted to indoor wiring.

Art 334.10: TRUE

Cable tray systems shall be installed as complete systems.

Art 392.18: TRUE

Busways shall be used for indoor work only.

Art 368.10: FALSE

A(n) ________ is any point in the electrical system where current supplies utilization equipment.

Art 100: Outlet

A(n) ________ box is a box in which splices, taps, or terminations are made.

Art 314.70: Junction

You can also click the terms or definitions to blur or reveal them

A(n) assembly is a surface, flush, or freestanding raceway that contains conductors and receptacles.
*Art 380: Multioutlet

A(n) is a metallic or nonmetallic trough with a hinged or removable cover designed to house and protect conductors and cables.
*Art 376 & 378: Wireway

Aluminum fittings and enclosures shall not be used with RMC.
*Art 344.14: FALSE

AC cable shall be installed at least 3/4" back from the finished edge of framing members.
*Art 300.4(D): FALSE

MC cable with a smooth sheath shall have a bending radius of a minimum of 10 times the diameter of the cable.
*Art 330.24(A)(1): TRUE

The use of NM cable in any building or structure designated in NFPA 220 as Type I or II is prohibited unless the NM cables are installed in raceways that are permitted in Type I and II construction.
*Art 334.10(5): TRUE

T ot F. A trolley busway has an open bottom.
*Art 368: TRUE

A(n) type conduit body has a hub at both ends.
*Art 314.29: C Type

Type USE cable is listed for direct burial.
*Art 338.10: TRUE

An auxiliary gutter shall not extend more than ' beyond the equipment it supplements.
*Art 336.12: 30'

A(n) is a double bend in a raceway.
*Art 352.24: Offset

MC Cables is a factory assembly of or more conductors.
*Art 330: One

Type NM cable has a flame-retardant and moisture-resistance outer jacket that is restricted to indoor wiring.
*Art 334.10: TRUE

Cable tray systems shall be installed as complete systems.
*Art 392.18: TRUE

Busways shall be used for indoor work only.
*Art 368.10: FALSE

A(n) is any point in the electrical system where current supplies utilization equipment.
*Art 100: Outlet

A(n) box is a box in which splices, taps, or terminations are made.
*Art 314.70: Junction