chapter 10 tools and techniques Test 2

A______ cross-point screwdriver has a sharp point, while a _____ has a blunt tip and they are not interchangeable.

Reed&prince, Philips

Electric screwdrivers should not be used around______ as they can be an explosion hazard

File tank access plates

A_____ wrench is used when a bolt is in a location where an obstruction prevents the use of a socket or full sized wrench

Crowsfoot wrench

Pliers should never be used as a substitute for a_____

Wrench

To prevent scratching and denting of soft substances when clamping, install_____ on the vice jaws.

Brass or copper caps

Hollow punches are also called____

Gasket punches

Never turn a reamer_____

Backwards

Shrinking, stretching and planishing hammers are____ hammers

Body

The____ of a drill bit do the actual cutting

Lips

Alternating the angle of the file as it is drawn across the work is called______

Cross filing

Which type of hammer is used to avoid creating sparks?

Lead or copper hammer

Which type of wrench should be used whenever possible since it provides the best protection to both the user and the equipment?

Box-end

Which type of pliers should NOT be used to hold or grip objects?

Diagonal-cutting

When an item needs a hole of an exact size, it must be:

Reamed

The type of dies used for restoring damage or rusty threads on screws or bolts are:

Solid dyes

What is used to remove broken screws without damaging the surrounding metal or threaded hole?

Screw extractor

When using a hollow punch to cut holes in leather or rubber gasket, protect the tool by using:

A plywood or Masonite backup material

The ground pin on an electric tool power cord reduces the possibility of:

Electric shock

Crossfilling is done to produce:

An exceptionally flat surface

When preparing a piece of metal for drilling, a shallow center punch depth:

Will allow the drill bit to slip out and wander