Case 5: Benjamin Nuri - Anxiety Disorders

John Ford's Tis pity She's a Whore

U.S. History Final Exam Study Guide 1. Columbus Christopher Columbus was an Italian explorer who sailed for Spain in 1492. He was searching for a westward route to Asia but instead reached the Caribbean. His voyage began long-term European exploration and colonization of the Americas. Columbus’s arrival also led to major consequences for Native Americans, including disease, conquest, forced labor, and cultural destruction. 2. Columbian Exchange The Columbian Exchange was the transfer of plants, animals, people, diseases, and ideas between Europe, Africa, and the Americas after 1492. Europeans brought horses, cattle, wheat, and diseases like smallpox. The Americas sent corn, potatoes, tomatoes, tobacco, and cacao to Europe. It changed diets, economies, populations, and environments around the world. 3. Jackson and the Bank Andrew Jackson opposed the Second Bank of the United States because he believed it gave too much power to wealthy elites. He thought the bank was unfair to common people and harmful to democracy. Jackson vetoed the bill to renew the bank’s charter and removed federal money from it. This became known as the “Bank War.” 4. Jamestown Jamestown was founded in 1607 in Virginia and was the first permanent English settlement in North America. The settlers struggled with disease, starvation, poor leadership, and conflict with Native Americans. The colony survived partly because of tobacco farming. Jamestown became important because it showed England could establish colonies in America. 5. John Smith / John Rolfe John Smith helped Jamestown survive by enforcing discipline with the rule, “He who does not work shall not eat.” He also built relationships with local Native Americans. John Rolfe introduced a successful type of tobacco, which became Jamestown’s main cash crop. Rolfe also married Pocahontas, helping create a short period of peace. 6. Middle Passage The Middle Passage was the forced journey of enslaved Africans across the Atlantic Ocean to the Americas. Conditions on ships were brutal, overcrowded, and deadly. Many Africans died from disease, starvation, abuse, or suicide. It was part of the triangular trade system and a major part of the growth of slavery in the Americas. 7. Bacon’s Rebellion Bacon’s Rebellion happened in Virginia in 1676. Nathaniel Bacon led poor farmers, indentured servants, and others against Governor Berkeley. They were angry about lack of protection from Native American attacks and unfair treatment by wealthy landowners. After the rebellion, plantation owners relied more on enslaved Africans instead of indentured servants. 8. Mayflower Compact The Mayflower Compact was signed in 1620 by the Pilgrims before they settled at Plymouth. It created a basic form of self-government. The signers agreed to make and follow laws for the good of the colony. It is important because it was an early example of democracy and majority rule in America. 9. Pilgrims & Puritans Pilgrims were Separatists who wanted to completely break away from the Church of England. They settled Plymouth in 1620. Puritans wanted to reform or “purify” the Church of England and settled mostly in Massachusetts Bay. Both groups came for religious reasons, but the Puritans created a larger and stricter society. 10. Age of Jackson Presidents The Age of Jackson refers mainly to Andrew Jackson’s presidency and the expansion of democracy for white men. Voting rights expanded as property requirements were removed for many white males. Jackson presented himself as a champion of the common man. However, this era also included Indian removal, the Bank War, and growing sectional conflict. 11. Stamp Act The Stamp Act of 1765 was a British tax on paper goods such as newspapers, legal documents, and playing cards. Colonists were angry because they had no representatives in Parliament. This led to the slogan “No taxation without representation.” Colonial protests helped force Britain to repeal the law. 12. American System The American System was an economic plan supported by Henry Clay. It included protective tariffs, a national bank, and internal improvements such as roads and canals. Its goal was to strengthen the U.S. economy and connect different regions. It showed the federal government taking a stronger role in economic growth. 13. Boston Massacre The Boston Massacre happened in 1770 when British soldiers fired into a crowd of colonists, killing five people. Colonists used the event as propaganda against Britain. Paul Revere’s engraving made the British look cruel and violent. It increased anger and tension between Britain and the colonies. 14. Boston Tea Party The Boston Tea Party happened in 1773. Colonists protested the Tea Act by dumping British tea into Boston Harbor. They were angry because Britain gave the British East India Company special advantages. Britain responded with the Intolerable Acts, which punished Massachusetts. 15. Declaration of Independence The Declaration of Independence was adopted on July 4, 1776. It announced that the colonies were separating from Britain. Thomas Jefferson wrote most of it. The document argued that people have natural rights and that government gets power from the consent of the governed. 16. Unalienable Rights Unalienable rights are rights that cannot be taken away. In the Declaration of Independence, these include “life, liberty, and the pursuit of happiness.” The idea came from Enlightenment thinkers like John Locke. These rights were used to justify independence from Britain. 17. Common Sense / Thomas Paine Common Sense was a pamphlet written by Thomas Paine in 1776. It argued that the colonies should become independent from Britain. Paine used simple language so ordinary people could understand. It helped convince many colonists to support independence. 18. Articles of Confederation The Articles of Confederation were America’s first national government. They created a weak central government because Americans feared tyranny. Congress could not tax, regulate trade well, or enforce laws effectively. Its weaknesses led to the creation of the Constitution. 19. Shays’ Rebellion Shays’ Rebellion was a farmers’ rebellion in Massachusetts in 1786–1787. Farmers were angry about debt, taxes, and losing their farms. The weak national government could not respond effectively. This showed the problems of the Articles of Confederation and encouraged leaders to write the Constitution. 20. Lexington and Concord / “Shot Heard ’Round the World” The Battles of Lexington and Concord happened in April 1775. They were the first battles of the American Revolution. British troops went to seize colonial weapons, but colonial militias resisted. The “shot heard ’round the world” refers to the first shot that began the Revolution. 21. Bunker Hill The Battle of Bunker Hill happened in 1775 near Boston. The British won, but they suffered heavy casualties. The battle proved that colonial forces could fight against the powerful British army. It gave colonists confidence early in the Revolution. 22. Saratoga / Ben Franklin The Battle of Saratoga in 1777 was a major American victory. It is considered the turning point of the Revolutionary War. After Saratoga, France agreed to support the Americans. Benjamin Franklin helped negotiate the French alliance, which provided money, troops, and naval support. 23. Yorktown The Battle of Yorktown happened in 1781. American and French forces trapped British General Cornwallis in Virginia. The French navy blocked British escape by sea. Cornwallis surrendered, effectively ending the Revolutionary War. 24. Alexander Hamilton / Economic Plan Alexander Hamilton was the first Secretary of the Treasury. His economic plan included paying off national debt, creating a national bank, and supporting manufacturing. He wanted a strong federal government and strong economy. His plan helped stabilize the new nation but caused political conflict. 25. Whiskey Rebellion The Whiskey Rebellion happened in 1794 when farmers protested a tax on whiskey. President George Washington sent federal troops to stop the rebellion. This showed that the new Constitution gave the federal government power to enforce laws. It was a contrast to the weakness shown during Shays’ Rebellion. 26. Washington’s Farewell Address Washington’s Farewell Address warned Americans against political parties and permanent foreign alliances. He believed political parties could divide the nation. He also wanted the U.S. to avoid being pulled into European conflicts. His advice influenced American foreign policy for many years. 27. James K. Polk James K. Polk was president from 1845 to 1849. He strongly supported Manifest Destiny and westward expansion. During his presidency, the U.S. gained Oregon territory and fought the Mexican-American War. The U.S. gained a large amount of land, including California and the Southwest. 28. William Henry Harrison William Henry Harrison was the 9th president of the United States. He was known as a military hero from the Battle of Tippecanoe. He gave a very long inaugural speech in cold weather and died about a month later. He had the shortest presidency in U.S. history. 29. Constitution The Constitution is the supreme law of the United States. It replaced the Articles of Confederation and created a stronger federal government. It established three branches: legislative, executive, and judicial. It also created checks and balances to prevent one branch from becoming too powerful. 30. Preamble to the Constitution The Preamble is the introduction to the Constitution. It begins with “We the People.” It explains the goals of the government, such as forming a more perfect union, establishing justice, ensuring peace, providing defense, promoting general welfare, and securing liberty. 31. The Republican Party The Republican Party was founded in the 1850s. It opposed the spread of slavery into western territories. Abraham Lincoln was the first Republican president. The party’s rise showed how slavery was becoming the central political issue before the Civil War. 32. Three-Fifths Compromise The Three-Fifths Compromise was made at the Constitutional Convention. It said that enslaved people would count as three-fifths of a person for representation and taxation. Southern states wanted enslaved people counted for more representation. This compromise increased Southern political power while protecting slavery. 33. Checks and Balances Checks and balances allow each branch of government to limit the power of the others. For example, the president can veto laws, Congress can override vetoes, and the Supreme Court can declare laws unconstitutional. This system prevents any one branch from becoming too powerful. 34. Intolerable Acts The Intolerable Acts were passed by Britain after the Boston Tea Party. They punished Massachusetts by closing Boston Harbor and limiting self-government. Colonists saw these acts as unfair and oppressive. They helped unite the colonies against Britain. 35. Bill of Rights The Bill of Rights is the first ten amendments to the Constitution. It protects individual freedoms such as speech, religion, press, assembly, and the right to bear arms. It was added to satisfy Anti-Federalists who feared a strong central government. 36. Impressment Impressment was the British practice of forcing American sailors into the British navy. It angered Americans and violated U.S. neutrality. Impressment was one of the major causes of the War of 1812. 37. Judicial Review / Marbury v. Madison Judicial review is the power of the Supreme Court to declare laws unconstitutional. It was established in Marbury v. Madison in 1803. Chief Justice John Marshall strengthened the power of the Supreme Court through this decision. 38. James Madison James Madison is known as the “Father of the Constitution” because he helped design the U.S. government. He also helped write the Federalist Papers and the Bill of Rights. As president, he led the country during the War of 1812. 39. War of 1812 / Battle of New Orleans The War of 1812 was fought between the United States and Britain. Causes included impressment, trade restrictions, and British support for Native American resistance. The Battle of New Orleans was fought after the peace treaty had been signed, but news had not arrived. Andrew Jackson became a national hero because of the victory. 40. Monroe Doctrine The Monroe Doctrine was announced in 1823 by President James Monroe. It warned European nations not to colonize or interfere in the Americas. In return, the U.S. would stay out of European affairs. It showed growing American confidence in foreign policy. 41. John Quincy Adams / Corrupt Bargain John Quincy Adams became president after the election of 1824. No candidate won a majority, so the House of Representatives decided the election. Henry Clay supported Adams and later became Secretary of State. Andrew Jackson’s supporters called this a “corrupt bargain.” 42. Manifest Destiny Manifest Destiny was the belief that the United States was destined to expand across North America. It encouraged westward expansion. Supporters saw expansion as progress, but it led to Native American removal, war with Mexico, and conflict over slavery. 43. Trail of Tears / Indian Removal Act The Indian Removal Act of 1830 allowed the federal government to move Native Americans west of the Mississippi River. The Trail of Tears refers especially to the forced removal of the Cherokee. Thousands died from hunger, disease, and exposure. It is one of the darkest examples of U.S. expansion. 44. Worcester v. Georgia Worcester v. Georgia was an 1832 Supreme Court case. The Court ruled that Georgia had no authority over Cherokee land. However, President Andrew Jackson did not enforce the ruling. The Cherokee were still forced to move west. 45. Missouri Compromise The Missouri Compromise was passed in 1820. Missouri entered as a slave state, and Maine entered as a free state. It also banned slavery north of the 36°30′ line in the Louisiana Territory. It temporarily balanced free and slave states but did not solve the slavery issue. 46. Alamo The Alamo was a mission in San Antonio, Texas, where Texan defenders fought Mexican forces in 1836. The defenders were defeated, but the battle became a symbol of resistance. “Remember the Alamo” became a rallying cry during the Texas Revolution. 47. Kansas-Nebraska Act The Kansas-Nebraska Act of 1854 allowed settlers in Kansas and Nebraska to decide whether to allow slavery through popular sovereignty. It repealed the Missouri Compromise line. It led to violence in Kansas, known as “Bleeding Kansas,” and increased sectional conflict. 48. Harriet Tubman Harriet Tubman escaped slavery and became a leader in the Underground Railroad. She helped many enslaved people escape to freedom. During the Civil War, she also served as a nurse, spy, and scout for the Union. She became a symbol of courage and resistance to slavery. 49. Seneca Falls Convention The Seneca Falls Convention was held in 1848 in New York. It was the first major women’s rights convention in the United States. Leaders included Elizabeth Cady Stanton and Lucretia Mott. The convention demanded women’s rights, including the right to vote. 50. John Brown John Brown was a radical abolitionist who believed slavery must be ended by force. In 1859, he led a raid on Harpers Ferry to start a slave rebellion. The raid failed, and Brown was executed. His actions increased tension between North and South before the Civil War. 51. Fugitive Slave Act The Fugitive Slave Act was part of the Compromise of 1850. It required citizens to help capture escaped enslaved people. It also punished people who helped freedom seekers. Many Northerners were angered by the law because it forced them to participate in slavery. 52. Harriet Beecher Stowe / Uncle Tom’s Cabin Harriet Beecher Stowe wrote Uncle Tom’s Cabin in 1852. The novel showed the cruelty of slavery and became very popular in the North. It helped increase abolitionist feelings. Southerners criticized it and argued that it gave a false picture of slavery. 53. Dred Scott v. Sandford Dred Scott v. Sandford was an 1857 Supreme Court case. The Court ruled that enslaved people were not citizens and could not sue in court. It also said Congress could not ban slavery in the territories. This decision angered Northerners and made sectional conflict worse. 54. Lincoln-Douglas Debates The Lincoln-Douglas debates happened in 1858 during the Illinois Senate race. Abraham Lincoln and Stephen Douglas debated slavery’s expansion. Lincoln argued slavery should not spread, while Douglas supported popular sovereignty. Although Lincoln lost the Senate race, the debates made him nationally known. 55. Popular Sovereignty Popular sovereignty means allowing people in a territory to vote on whether to allow slavery. Stephen Douglas supported this idea. It was used in the Kansas-Nebraska Act. Instead of solving the slavery issue, it led to violence and conflict. 56. Fort Sumter Fort Sumter was a federal fort in South Carolina. Confederate forces fired on it in April 1861. This attack began the Civil War. After Fort Sumter, more Southern states joined the Confederacy. 57. Emancipation Proclamation The Emancipation Proclamation was issued by Abraham Lincoln in 1863. It declared enslaved people free in Confederate-controlled areas. It did not immediately free all enslaved people, but it changed the purpose of the war. The Civil War became a fight to preserve the Union and end slavery. 58. Gettysburg Address The Gettysburg Address was a speech given by Abraham Lincoln in 1863 after the Battle of Gettysburg. Lincoln honored the soldiers who died and explained the meaning of the war. He said the nation was fighting for democracy and equality. The speech is one of the most famous in American history. 59. Reconstruction Reconstruction was the period after the Civil War when the U.S. tried to rebuild the South and reunite the nation. It also aimed to define freedom and rights for formerly enslaved people. During Reconstruction, the 13th, 14th, and 15th Amendments were passed. However, racism, Black Codes, and groups like the Ku Klux Klan limited progress. 60. Civil War Amendments The Civil War Amendments are the 13th, 14th, and 15th Amendments. The 13th Amendment abolished slavery. The 14th Amendment gave citizenship and equal protection under the law. The 15th Amendment gave Black men the right to vote. 61. Roger Williams Roger Williams was a Puritan minister who believed in religious freedom and separation of church and state. He was banished from Massachusetts for his beliefs. He founded Rhode Island, which became known for religious tolerance. His ideas influenced later American ideas about freedom of religion.

Understand the Basic Principles of Haircutting Good haircuts begin with an understanding of the shape of the head, referred to as the head form, also known as head shape. Hair responds differently on various areas of the head depending on the length and the cutting technique used. Being aware of where the head form curves, turns, and changes will help you achieve the look that you and your client are seeking. Reference Points Reference points on the head mark where the surface of the head changes, such as the ears, jawline, occipital bone, or apex. These points are used to establish design lines (figure 16-1). An understanding of head shape and reference points will help you in the following ways: Finding balance within the design, so that both sides of the haircut turn out the same. Developing the ability to create the same haircut consistently. Showing where and when it is necessary to change technique to make up for irregularities (such as a flat crown) in the head form. Standard reference points are defined below: Parietal ridge (puh-RY-ate-ul RIJ). This is the widest area of the head, starting at the temples and ending at the bottom of the crown. This area is easily found by placing a comb flat on the side of the head: The parietal ridge is found where the head starts to curve away from the comb. The parietal ridge is also referred to as the crest area (figure 16-2). Occipital bone (ahk-SIP-ih-tul BOHN). The bone that protrudes at the base of the skull is the occipital bone. To find the occipital bone, simply feel the back of the skull or place a comb flat against the nape and find where the comb leaves the head (figure 16-3). Apex (AY-peks). This is the highest point on the top of the head. This area is easily located by placing a comb flat on the top of the head. The comb will rest on that highest point (figure 16-4). Four corners. These may be located in one of two ways. One is by placing two combs flat against the side and back, and then locating the back corner at the point where the two combs meet (figure 16-5). The second is by making two diagonal lines crossing the apex of the head, which then point directly to the front and back corners (figure 16-6). You will not necessarily use every reference point for every haircut, but it is important to know where they are. The location of the four corners, for example, signals a change in the shape of the head from flat to round and vice versa. This change in the surface can have a significant effect on the outcome of the haircut. For example, the two front corners represent the widest points in the bang area. Cutting past these points can cause the bang to end up on the sides of the haircut once it is dry, creating an undesirable result. Areas of the Head The areas of the head are described below (figure 16-7): Top. By locating the parietal ridge, you can find the hair that grows on the top of the head. This hair lies on the head shape. Hair that grows below the parietal ridge, or crest, hangs because of gravity. You can locate the top by parting the hair at the parietal ridge, and continuing all the way around the head. Front. By making a parting, or drawing a line from the apex to the back of the ear, you can separate the hair that naturally falls in front of the ear from the hair behind the ear. Everything that falls in front of the ear is considered the front. Sides. The sides are easy to locate. They include all hair from the back of the ear forward, below the parietal ridge. Crown. The crown is the area between the apex and the back of the parietal ridge. On many people, the crown is flat and is the site of cowlicks or whorls. Because of this, it is extremely important to pay special attention to this area when haircutting. Nape. The nape is the area at the back part of the neck and consists of the hair below the occipital bone. The nape can be located by taking a horizontal parting, or by making a horizontal line across the back of the head at the occipital bone. Back. By making a parting or drawing a line from the apex to the back of the ear, you can locate the back of the head, which consists of all the hair that falls naturally behind the ear. When you have identified the front, you have also identified the back. Bang area. also known as fringe area. The bang area is a triangular section that begins at the apex and ends at the front corners (figure 16-8). This area can be located by placing a comb on top of the head so that the middle of the comb is balanced on the apex. The spot where the comb leaves the head in front of the apex is where the bang area begins. Note that the bang area, when combed into a natural falling position, falls no farther than the outer corners of the eyes

Benjamin Double Sided

INTRODUCTORY SOCIOLOGY — CHAPTERS 1–5 The Study Guide Key concepts, theories, and methods for mastering the social world Ch. 1 — Sociology Ch. 2 — Research Ch. 3 — Culture Ch. 4 — Socialization Ch. 5 — Groups 01 CHAPTER ONE Sociology and the Real World What Is Sociology? Sociology is the systematic, scientific study of human society, social relationships, and social institutions. It examines how group membership and social forces shape individual behavior, beliefs, and life chances — using the sociological imagination (C. Wright Mills) to connect personal troubles to larger historical and structural forces. Micro vs. Macro Sociology micro Microsociology Focuses on small-scale, face-to-face interactions: how individuals communicate, negotiate meaning, and create social reality in everyday situations. Example: a conversation between two people. macro Macrosociology Focuses on large-scale social structures, institutions, and broad patterns across societies. Example: how capitalism shapes inequality across a nation. Major Theoretical Perspectives Structural Functionalism Society is a system of interrelated parts (institutions) that each serve a function to maintain stability and order. Dysfunction disrupts equilibrium. Key figures: Durkheim, Parsons. Conflict Theory Society is characterized by competition and inequality. Those with power exploit those without; social change comes through struggle. Key figure: Marx. Weberian Theory Emphasizes the role of ideas, culture, and meaning (not just economics) in shaping social life. Introduces stratification by class, status, and party; the concept of rationalization and bureaucracy. Key figure: Weber. Symbolic Interactionism People act based on the meanings they attach to objects and others, meanings that arise through social interaction and are maintained through interpretation. Key figures: Mead, Blumer. micro Postmodernism Rejects grand narratives and universal truths; argues that reality is socially constructed, knowledge is fragmented, and power shapes what counts as truth. Skeptical of science's neutrality. Key figures: Foucault, Baudrillard. Midrange Theory Seeks to build limited, testable theories about specific phenomena rather than sweeping explanations of all of society. Bridges abstract theory and empirical research. Key figure: Merton. 02 CHAPTER TWO Studying Social Life: Research Methods Quantitative vs. Qualitative Research Quantitative Uses numerical data and statistical analysis to test hypotheses and identify patterns across large samples. Examples: surveys with Likert scales, census data, experiments with control/treatment groups. Qualitative Generates rich, descriptive, non-numerical data to understand meaning, experience, and context in depth. Examples: ethnography, in-depth interviews, focus groups, content analysis of texts. Steps of the Scientific Method Identify a research problem or question Review existing literature on the topic Formulate a hypothesis (a testable prediction) Design a research methodology and collect data Analyze the data Draw conclusions and report findings (inviting replication) Six Research Methods — Strengths & Weaknesses Method Description Strengths Weaknesses Ethnography / Participant Observation Researcher immerses in a social setting to observe behavior firsthand Deep insight; captures context; reveals hidden norms Time-intensive; small scale; researcher bias; ethical issues of access Interviews Structured, semi-structured, or unstructured conversations to gather in-depth perspectives Rich qualitative detail; flexible; clarification possible Interviewer effect; social desirability bias; hard to generalize Surveys Standardized questionnaires administered to large samples Efficient; large-scale; quantifiable; cheap Superficial; question wording bias; low response rates; can't capture complexity Existing Sources Analysis of historical records, official statistics, media, documents, or prior studies Non-reactive; access to historical data; cost-effective Data may be incomplete, biased, or collected for other purposes Experiments Manipulates an independent variable in controlled conditions to measure effects Establishes causality; controls for confounds; replicable Artificial setting; ethical constraints; demand characteristics; limited scope Social Network Analysis Maps and measures relationships and information flows among individuals or groups Reveals structural patterns invisible in individual-level data; visual and quantitative Data collection is complex; boundary specification problems; privacy concerns Pitfalls & Ethical Issues Validity & Reliability: Ensuring a study measures what it claims to and produces consistent results Sampling Bias: Non-representative samples skew findings Researcher Bias: Personal values and assumptions can distort data collection and interpretation Informed Consent: Participants must voluntarily agree based on full knowledge of the study Confidentiality & Anonymity: Protecting the identities and privacy of participants Harm Prevention: Research must not expose participants to physical, psychological, or social harm Deception: Deceiving subjects (e.g., Milgram) raises serious ethical concerns even when scientifically useful 03 CHAPTER THREE Culture Defining Culture Culture is the totality of shared beliefs, values, norms, symbols, language, material objects, and practices that members of a society learn and transmit across generations. Ethnocentrism Judging another culture by the standards of one's own, viewing one's culture as superior. Can lead to misunderstanding and discrimination. Cultural Relativism Understanding a culture on its own terms, without imposing outside judgments. Promotes open-minded cross-cultural comparison. Components of Culture Symbols: Anything that carries shared meaning (flags, words, gestures) Language: The primary vehicle for transmitting culture; shapes perception (Sapir-Whorf hypothesis) Values: Broad, shared standards of what is good, desirable, or important Norms: Specific rules of behavior — folkways (informal), mores (moral norms), and laws (formalized) Material Culture: Physical objects created and used by a society (tools, buildings, clothing) Non-material Culture: Intangible elements — beliefs, values, ideas, customs Subcultures & Countercultures in the U.S. A subculture shares the dominant culture's overall values but maintains distinct norms or practices. A counterculture actively opposes or rejects core values of the dominant culture. Subcultures: LGBTQ+ communities Amish communities Hip-hop culture Gamer culture College Greek life Countercultures: 1960s hippie movement Militia movements Punk movement Anti-consumerism groups Processes of Cultural Change Discovery: Recognizing and understanding something previously unknown Invention: Creating new tools, ideas, or social patterns Diffusion: Spreading cultural elements from one culture to another Cultural Imperialism: Dominant cultures overpower or displace local ones (often via media or globalization) Acculturation: A minority group adopts elements of a dominant culture 04 CHAPTER FOUR Socialization, Interaction, and the Self Nature vs. Nurture Human behavior is shaped by both genetics (biological predispositions, temperament) and social environment (culture, interaction, learning). Sociologists emphasize that even traits with biological bases are expressed and interpreted through social contexts. Studies of feral children and cases of extreme isolation demonstrate that human potential requires social interaction to develop. Socialization & Social Isolation Socialization is the lifelong process by which individuals learn the norms, values, behaviors, and social skills appropriate to their society. Cases of social isolation (e.g., children raised in severely deprived environments) show that without social contact, children fail to develop language, emotional regulation, and basic cognitive skills — demonstrating that the "self" is fundamentally social in origin. Theories of the Self Cooley — "Looking-Glass Self" We develop our self-concept by imagining how others perceive us, then internalizing those imagined judgments. The self is a reflection of social feedback. Mead — "I" and "Me" The self has two parts: the spontaneous I and the socialized Me. Through play and games, children learn to take on the role of others and internalize the "generalized other" (society's expectations). Goffman — Dramaturgical Model Social life is like a theatrical performance. We manage impressions in "front stage" behavior and relax norms "backstage." The self is a performance, not a fixed essence. Agents of Socialization Family: The primary agent; instills foundational values, language, and identity from birth Schools: Teach not only academic skills but the "hidden curriculum" — punctuality, obedience, competition Peer Groups: Increasingly important in adolescence; shape attitudes, norms, and sense of belonging outside family Media: Pervasive shaper of cultural norms, gender roles, beauty standards, and political attitudes Statuses, Roles, and Role Conflict Ascribed status: Assigned at birth, involuntary (race, sex, birth order) Achieved status: Earned through effort or choice (occupation, education) Master status: One status that overrides all others (e.g., felon, celebrity) Role conflict: Occurs when incompatible demands arise from two different statuses (e.g., parent vs. employee) Role strain: Tension within a single role when its demands are contradictory (e.g., a manager who must be both friend and disciplinarian) 05 CHAPTER FIVE Separate and Together: Life in Groups Primary vs. Secondary Groups Primary Groups Small, intimate, emotionally close groups with enduring relationships. Members value the relationship for its own sake. Examples: family, close friends, a tight-knit sports team. Secondary Groups Larger, more impersonal, and goal-oriented. Relationships are instrumental. Examples: a workplace, a university class, a professional association. Group Size, Cohesion, Prejudice & Discrimination Dyads (2 people): Most intimate but fragile — collapses if one leaves Triads (3 people): More stable; coalitions can form; a third party can mediate or divide Larger groups: Greater stability but less intimacy; formalization of rules becomes necessary Cohesion: High cohesion strengthens commitment and performance but can lead to groupthink In-groups & Out-groups: Defining "us" vs. "them" fuels prejudice (negative attitudes) and discrimination (unequal treatment) against out-group members Social Influence & Conformity — Three Classic Experiments Asch Conformity Studies (1950s) Participants gave obviously wrong answers on a line-comparison task when confederates unanimously did so first — showing powerful pressure to conform even when the correct answer was clear. Milgram Obedience Studies (1960s) Participants administered what they believed to be dangerous electric shocks on an authority figure's orders — revealing alarming levels of obedience to legitimate authority. Zimbardo Stanford Prison Experiment (1971) College students assigned roles of "guard" or "prisoner" quickly conformed to those roles so intensely the study had to be stopped — illustrating how situational context shapes behavior. Group Composition & Leadership Diversity: Diverse groups tend to produce more creative solutions but can experience more conflict initially Leadership styles: Authoritarian (top-down, efficient in crisis); Democratic (collaborative, higher satisfaction); Laissez-faire (minimal direction, works with highly self-motivated groups) Instrumental leaders focus on task completion; expressive leaders maintain group morale and cohesion Bureaucracy & McDonaldization Bureaucracy (Weber) is a formal organization characterized by a clear hierarchy of authority, written rules and procedures, specialization of labor, and impersonality. It is the dominant organizational form of modern society. McDonaldization (Ritzer) extends Weber's rationalization thesis: modern society increasingly organizes social life around four principles modeled on fast food — efficiency (the optimal method), calculability (emphasis on quantity over quality), predictability (standardized outcomes), and control (substituting technology for human judgment). The irony: the rational system produces irrational outcomes (e.g., dehumanization, loss of creativity, homogenization of culture)

Benjamin and Charlie Chaplin: Film and Modernity

Walter Benjamin and the Work of Art in the Age of Mechanical Reproduction

5. Benjamin Bloom (Taxonomy)

The Curious Case of Benjamin Button

Benjamin

whore moans

Benjamin 1

Sapir-Whorf theory: Thinking depends on language

Benjamin Valentino: Why we kil: The Political science of political violence against civilians

072: Benjamin Blümchen (Second Edition)

Iceberg demonstrates the relationship between direct and indirect costs of accidents, showing that on average, indirect costs exceed direct costs. Examples of indirect costs include: - a) Overhead costs - b) Schedule delays - c) **Medical costs** (DIRECT COST) - d) Cleanup time ## 7. Geometric Sequences - **Sequence Identification:** The proper arrangement of the following shapes by their complexity is: I. Quadrilateral II. Parallelogram III. Rectangle IV. Square. - a) II, IV, III, I - b) I, II, III, IV - c) IV, III, II, I - d) I, III, II, IV ## 8. Building Use Classification - The term **Occupancy** refers to a type of use of a building for interior space such as an office, restaurant, private residence, or school, grouped based on similar life-safety characteristics, fire hazards, and combustible contents. - a) Building elements - b) **Occupancy** - c) Building Code - d) Accommodation ## 9. Construction Pit Transport Fees - The maximum distance, as specified in the construction contract, which the contractor is expected to transport soil material without receiving additional payment, is known as **Freehaul distance**. - a) **Freehaul distance** - b) Overhaul distance - c) Haul distance - d) Baseline distance ## 10. Retarder Application Principles - **Fundamental Principles for Upper Retarders:** The retarder should be as near as possible to the warm side of the insulation or the warm face of the assembly. Moreover, it should be installed using a method appropriate for the specific condensation hazard. ## 11. Material Characteristics - **Hardness**: A measure of a material's ability to resist indentation or penetration. - a) **Hardness** - b) Ductility - c) Toughness - d) Resilience ## 12. Soil Density Changes - **Consolidation**: An increase in the soil density of cohesive soil resulting from the expulsion of water from the soil's void spaces. - a) Segregation - b) **Consolidation** - c) Compaction - d) Soil Stabilization ## 13. Concrete Finishing Process - The correct step-by-step process of finishing standard weight concrete slabs is as follows: 1. Bleeding 2. Screeding 3. Leveling 4. Edging 5. Jointing 6. Floating 7. Troweling 8. Broom finishing ## 14. Safety Oversight Authority - The entity given authority to review reports of inspection, accident investigations, and the implementation of the program is the **Health and Safety Committee**. - a) **Health and Safety Committee** - b) DOLE - c) DPWH - d) BFP ## 15. Soil Grouting Process - The process of injecting any agent into soil or rock to increase its strength or stability, protect foundations, or reduce groundwater is termed **Grouting**. - a) **Grouting** - b) Pumping - c) Bleeding - d) Screeding ## 16. Construction Safety Program Requirements - Every construction project must have a suitable **Construction Safety and Health Program**, which adheres to the rules and orders issued by the DOLE. - a) **Construction Safety and Health Program** - b) Occupational Health and Safety Program - c) Occupational Safety and Health Administration - d) Workplace Safety and Procedures ## 17. Safety Sight Distance and Vehicle Characteristics - One of the provisions for safety sight distance is dependent on the characteristics of the vehicle, including: - I. Type of vehicle (car or truck) - II. Friction between the tire and road - III. Eye height of the driver - IV. Speed of the vehicle - a) I only - b) II and III only - c) IV only - d) **All of the above** ## 18. Concrete Leveling Technique - **Screeding** is the process to level a floor or layer of concrete with a straight edge using a back and forth motion while moving across the surface. - a) Troweling - b) **Screeding** - c) Floating - d) Finishing ## 19. Structural Support Types - A structure driven into the soil to support construction by transferring building loads to a deeper and stronger layer of soil or rock is referred to as a **Pile**. - a) Caisson - b) Pier - c) Shoring - d) **Piles** ## 20. Road User Guidance Signs - **Guide signs** inform and advise road users of directions, distances, routes, and the location of services. - a) Cross road sign - b) **Guide signs** - c) Advance direction signs - d) Traffic instruction signs ## 21. Delay Concept in Transportation - The **Delay** refers to the difference between the actual travel time and the ideal travel time for a segment of the transportation system. - a) Queue time - b) Travel time - c) **Delay** - d) Service time ## 22. Construction Instructions - **Specifications** are written instructions detailing how a facility is to be constructed. - a) **Specifications** - b) Estimates - c) Bid documents - d) Plans ## 23. Tidal Wave Phases - The interval referring to the time delay in highest tide for each location due to cosmic forces and friction is called the **Age of Tides**. - a) **Age of Tides** - b) Lunar tide - c) Diurnal tide - d) Semi-diurnal tide ## 24. Road Environment Factors and Safety Sight Distance - The provision for safety sight distance is influenced by the following characteristics of the road environment: - I. Road geometry - II. Road surface - III. Road illumination at night - IV. Road topography - a) I and IV only - b) I, II, and III only - c) II and IV only - d) **All of the above** ## 25. Pavement Cracking Types - **Transverse cracking** occurs at right angles to the pavement centerline due to shrinkage or differential thermal stress of the asphalt concrete or reflective cracks. - a) Alligator cracking - b) Block cracking - c) **Transverse cracking** - d) Longitudinal cracking ## 26. Pavement Surface Wear - **Raveling** refers to the wearing away of the pavement surface caused by dislodging of aggregated particles and binder, often a result of insufficient asphalt binder in the mix. - a) Joint or crack spalling - b) Flushing - c) Bleeding - d) **Raveling** ## 27. Surveying Procedures - **Double centering** is a procedure in a horizontal angle layout that involves turning the angle twice and creating a line of sight for critical points. Not used on every point. ## 28. Fatigue Resistance Measure - **Fatigue resistance** is the measure of a material's ability to withstand cyclic (repeated) stresses, with the risk of fracture occurring without warning, even below yield strength. ## 29. Screeding Definition - **Screeding** is defined as the method of moving a straight-edge back and forth with a saw-like motion across the forms to finish concrete surfaces. ## 30. Hazard Definition - A **Hazard** is defined as a source or situation that poses a potential risk for harm, injury, or damage to health, property, or the environment. ## 31. Risk Definition - **Risk** is defined as a human action that deviates from commonly accepted safe procedures that may result in an accident; it requires adherence to a suitable Construction Safety and Health Program, per DOLE requirements. ## 32. Loading Zones - **Loading and unloading zone markings** must be red in color. ## 33. Project Definition - A **Project** is a series of activities with specified objectives that have defined start and end dates, monitored planning, and resource consumption, including money, labor, and equipment. - a) **All of the above** - b) I, II, IV, and V - c) I, II, and IV - d) I, III, and V ## 34. Contract Changes - The following reasons may cause a contract change, except for: - a) Unforeseen conditions - b) **Poor jobsite productivity** - c) A change in owner requirements - d) Designer omission or error ## 35. Road Condition Characteristics - Factors affecting safety sight distance based on the road environment include: - I. Road geometry-grade and curvature sight limitations - II. Road surface-sealed or unsealed, and its smoothness - III. Road illumination at night - IV. Road topography - a) I, II, and III only - b) **All of the above** - c) I, III, and IV only - d) II, III, and IV only ## 36. Structural Properties in Coastal Construction - Key structural properties vital for material selection in harbor and coastal construction include: - I. Specific gravity - II. Material strength - III. Resistance to cyclical impact loading - IV. Resistance to seismic forces - V. Material flexibility - VI. Structural size - a) I, II, and III only - b) IV, V only - c) I, III, and IV only - d) **All of the above** ## 37. Piling Definition - **Piles** are structural components driven into the soil transferring building loads to deeper and stronger soil or rock layers. ## 38. Trip Definition - A **Trip** is defined as the basic unit of travel behavior, involving movement from a single origin to a single destination, characterized by origins, destinations, purposes, and travel modes. ## 39. Signal Coordination - **Signal coordination** involves timing signals in relation to one another, allowing vehicles traveling at a determined speed to pass through successive green lights. ## 40. Rumble Strip Purpose - A **Rumble strip** is a type of thermoplastic lane marking that provides motorists with visual, audio, and motion warnings on the road. ## 41. Grade Resistance - **Grade resistance** represents the component of vehicle weight that acts parallel to an inclined surface. ## 42. Hazard Circumstances - **Hazard** refers to circumstances that deviate from standard conditions, permitting occurrences of accidents or incidents. ## 43. Demolition Area Restrictions - During demolition, no one except workers directly engaged in demolition shall enter an area within a distance equal to 1.5 times the height of the structure being demolished. ## 44. Logistic Definition - **Logistics** refers to the strategic management of resources, materials, and information to ensure efficient movement and delivery of goods and services. ## 45. Design Speed - **Design speed** refers to the maximum safe speed that can be maintained over a specified section of highway under favorable conditions governed by design features. ## 46. Bid Bond Valid Statement - A valid statement regarding a **bid bond** is that it represents costs incurred by the owner if the bidder fails to enter into a contract. - a) It pays for costs incurred by the bid deadline is mixed. - b) **It represents the costs that the owners incur if the bidder fails to enter into a contract.** - c) It represents costs incurred by subcontractors if the project is underbid. - d) It pays for office overhead costs related to a bid ## 47. Hygroscopic Material Definition - **Hygroscopic** refers to a substance that tends to absorb water from the air. ## 48. Safe Pile Capacity Data - The safe capacity of piles driven by powered hammers is based on data comprising: - I. Average penetration per blow (last six blows) - II. Energy of hammer - III. Weight of hammer - IV. Weight of pile including appurtenances - V. Coefficient of restitution based on pile weight - VI. **All of the above** ## 49. Berth Structure Definition - A **Pier** is a berth structure projecting out from the shoreline. - a) Groin - b) Wharf - c) Breakwater - d) **Pier** ## 50. Road Alignment Signs - **Chevron signs** are used to guide drivers through a change in the horizontal alignment of the road. - a) **Chevron signs** - b) Supplementary signs - c) Guide post signs - d) Delineators ## 51. Road Delineation Devices - Delineation of road alignment includes: - I. Pavement Markings - II. Signs - III. Guide Posts - IV. Reflective delineators - V. Lighting - VI. Curb or other physical devices - a) I, II, II, and IV only - b) I, II, IV, and VI only - c) I, V, V, and VI only - d) **All of the above** ## 52. Properties of Queuing Diagrams - Important properties in queuing diagrams include: - I. The slope of D(t) is the departure rate; the slope of A(t) is the arrival rate. - II. The departure rate cannot exceed the service rate or capacity of the server. It may be less. - III. Cumulative departures can never exceed cumulative arrivals. D(t) can never be above A(t) in the queuing diagram. - IV. When a queue exists, the departure rate equals the service rate. In the absence of a queue, the same rate equals the arrival rate. - V. **All of the above** ## 53. Scaffolding Capacity Brackets - Capacity requirements for all scaffolding must be: - a) At least four times its own weight - b) At least 6 times its own weight - c) At most 6 times its own weight - d) At most 5 times its own weight ## 54. Highway Driver Elements - The essential elements of highway driving are referred to as **Driving Task**, encompassing navigation, guidance, and control. - a) **Driving task** - b) Ergonomics - c) Engineering psychology - d) Range index ## 55. Protective Systems in Excavation - **Protective systems** include methods for protecting workers from cave-ins during excavations, consisting of support systems, sloping, benching systems, and shield systems. - a) **Protective system** - b) Personnel protective system - c) Fall arrest system - d) Level arrest system ## 56. Bucket Volume Definitions - **Bucket load capacity** refers to the volume contained within the bucket outline as determined by the bucket sides. - a) Plate line capacity - b) Water line capacity - c) Heap volume - d) **Bucket load capacity** ## 57. Contract Definition - A **Contract** is defined as a formal or legally binding agreement between two parties. ## 58. Toolbox Meeting Definition - A **Toolbox Meeting** is an informal group discussion that focuses on a specific safety issue, facilitating health and safety culture discussions on job sites. ## 59. Road User Directional Signs - **Guide signs** inform road users about the directions and distances to destinations on their route or intersecting roads. - a) Supplementary signs - b) **Guide signs** - c) Warning signs - d) Stack signs ## 60. Specifications Definition - **Specifications** provide detailed requirements for materials, equipment, and workmanship for projects. - a) **Specifications** - b) Bid documents - c) Estimates - d) Plans ## 61. Damping Capacity - **Damping capacity** is the measure of a material’s ability to absorb or dissipate mechanical vibrations. ## 62. Profile Drawing Definition - A **Profile** is a drawing with elevation as the vertical axis and horizontal distance measured along the centerline as the horizontal axis. ## 63. PERT CPM Network Preparation - When preparing a report on the PERT CPM network in construction, one should consider: - a) Pessimistic time network - b) Optimistic time - c) Probable time - d) **All of the above** ## 64. Post-Construction Resolution - This occurs after completion of construction and the resolution of the majority of punchlist and commissioning issues, known as the **Profile**. ## 65. Concrete Formwork Concept - **Formwork** is necessary for concrete placement to maintain shape before the concrete sets. ## 66. Benching Technique in Excavation - **Benching** is a method of protecting workers from cave-ins by creating a series of horizontal levels or steps in excavated areas. - a) **Benching** - b) Shoring - c) Shielding - d) Fall arrest system ## 67. Concrete Surface Leveling - The process of leveling a concrete surface with enough mortar after screeding is termed **Floating**. - a) **Floating** - b) Edging - c) Leveling - d) Bleeding ## 68. Control Joint Placement in Concrete - **Jointing** involves placing premolded inserts in concrete slabs to control cracking due to shrinkage, immediately after or during edging. - a) Jointing - b) Troweling - c) Leveling - d) Edging ## 69. Safety Barrier Considerations - Reasons to establish a need for safety barriers include: - I. Fore slope and back slope steepness and height - II. Unforgiving hazards within the clear zone - III. Water hazards within the clear zone - a) II only - b) I only - c) II and III only - d) **All of the three** ## 70. Limits on Road Messages - Messages painted on pavement should be limited to **six words or less**. - a) **six words or less** - b) five words or less - c) four words or less - d) three words or less ## 71. Types of Pavement Markings - The four types of pavement and curb markings include: - a) **longitudinal lines, transverse lines, lane lines, and center lines** - b) longitudinal lines, transverse lines, stop lines, & center lines - c) longitudinal lines, transverse lines, transition lines, & stop lines - d) longitudinal lines, transverse lines, other lines, & other markings ## 72. Overtaking Lane Design Considerations - Design considerations for overtaking and climbing lanes include: - I. Initial diverge taper - II. Auxiliary lane length - III. End or merge taper - a) **I, II, & III** - b) I & II only - c) II & III only - d) I & III only ## 73. Road Density Definition - **Density** is defined as the number of vehicles per unit distance occupying a roadway section at a given instant in time, measured in vehicles per mile or kilometer. - a) flow - b) **density** - c) capacity - d) volume ## 74. Continuous Waterfront Structure - A **Wharf** is a continuous structure built parallel to the shoreline for loading and unloading ships. - a) pier - b) **wharf** - c) port - d) lighthouse ## 75. Vertical Design Factors - The minimum **K value** for sag vertical should be based on the following factors: - I. Safety sight distance for drivers - II. Appearance in low fill and flat areas - III. Riding comfort, especially at floodway approaches - IV. Vertical alignment fitting into natural terrain. - a) I, II, & III only - b) I, III, & IV only - c) I, II, & IV only - d) II, III, & IV only ## 76. Rumble Strip Definition - A **Rumble strip** is a thermoplastic lane marking designed for visual, audio, and motion warnings for motorists on the road. - a) regulatory signs - b) diagonal marking - c) chevron marking - d) **rumble strip** ## 77. Lane Line Continuation Rules - Lane lines must not be continued in the following scenarios: - I. Across signalized intersections, where low priority road lines must be discontinued. - II. Across side street entrances, except for one-way streets. - III. Past the start of the taper at multi-lane road narrows. - IV. On roads with more than two lanes without median islands. - a) I, II, & IV - b). I, II, & IV - c) II, III, & IV - d) I, II, and III ## 78. Directional Information Signs - **Guide signs** serve to inform road users about directions, distances to destinations, and service locations. - a) **guide signs** - b) warning signs - c) regulatory sign - d) traffic sign ## 79. Benefits of Shoulder Paving - **Shoulder paving** offers: - I. Integrity of the pavement - II. Width for edge line pavement markings - III. Enhanced safety to prevent vehicle skidding - IV. Lower maintenance costs compared to paved shoulders - a) I, III, & IV only - b) **all of the above** - c) I, II, & III only - d) II, III, & IV only ## 80. Structures Built into the Sea - A **Pier** is defined as a structure built into the sea but not aligned parallel to the coastline, which serves various purposes for vessels. - a) lighthouse - b) port - c) **pier** - d) wharf ## 81. Navigable Water Definitions - A navigable body of water leading to a harbor is referred to as a **Channel**. - a) fairway - b) **channel** - c) shoal - d) significant depth ## 82. Types of Curves in Roads - **Vertical curves** are typically parabolas centered around the point of intersection of vertical tangents they connect. - a) **vertical curve** - b) vertical tangent - c) spiral curve - d) grade ## 83. Wind-Generated Waves - Waves under wind influence are referred to as **Sea waves**. - A. Wakes - B. **Sea** - C. Swells - D. Seiching ## 84. Traffic Flow Rate - The **Capacity** refers to the maximum sustained rate of flow for vehicles (passenger cars per hour per lane) under uniform conditions on a freeway segment. - A. Density - B. Traffic flow - C. **Capacity** - D. Design hourly volume ## 85. Hazardous Condition Warnings - **Warning signs** inform road users about hazardous or unexpected road conditions. - A. Roadwork signs - B. **Warning signs** - C. Traffic signs - D. Guide signs ## 86. Purpose of Edge Lines - The purpose of **edge lines** includes discouraging shoulder travel, enhancing safety at night, guiding past hazards, and delineating the edge of the traveled way from the shoulder. - A. I - B. IV - C. V - D. II ## 87. Road Capacity Measurement - **Road capacity** is the maximum number of vehicles expected to pass over a given section of a roadway in one direction during one hour. - A. **Road capacity** - B. Flow of traffic - C. Density - D. Free flow ## 88. High-Rise Building Cleaners - For window cleaners of high-rise buildings, **Slung Scaffold** is most appropriate for providing a suspended working platform. - a) Birdcage Scaffold - b) **Slung Scaffold** - c) Cantilever Scaffold - d) Trestle Scaffold ## 89. Leading Workplace Fatalities - **Falls** are the leading cause accounting for more than 50% of workplace fatalities. - a) Slips - b) Trips - c) **Falls** - d) Electrocution ## 90. Excavation Material Placement - Excavated material should be kept from the excavation edge at a distance not less than **1/4** of the excavation depth. - a) **1/4** - b) 1/3 - c) 1/2 - d) 2/3 ## 91. Temporary Vertical Support Definition - **Dead Shore** refers to temporary vertical support installed directly beneath structural elements while repairs or foundation work is conducted. - A. **Dead Shore** - B. Lateral Bracing - C. Cantilever Prop - D. Raking Shore ## 92. Building Information Modeling - **Building Information Modeling** (BIM) is a 3D model-driven process generating a digital representation of facility features, supporting informed decision-making throughout its lifecycle. - A. CAD Drafting - B. **Building Information Modeling** - C. GIS Mapping - D. Structural Analysis Software ## 93. Operating Costs in Contracting - **Operating Cost** refers to expenses incurred while using equipment for project execution, including repair costs, parts replacement, fuels, labor, and storage. - A. I, II, III, IV - B. I, II, III, IV, V - C. I, II, III - D. II, III, IV ## 94. Water Supply Pipe Terminology - In a water supply system, the vertical pipes are referred to as **risers**, and the horizontal pipes as **branches**. - A. branches and risers respectively - B. **risers and branches respectively** - C. roughing ins and connections respectively - D. connections and roughing ins respectively ## 95. Joint Sealant Definition - A **Joint Sealant** is a rubber or rubber-like material used to fill and seal joints or openings, either alone or with other materials. - A. Grout - B. **Joint Sealant** - C. Adhesive - D. Mortar ## 96. Demolition Area Entry Restriction - During demolition, no one except those engaged in the work shall enter an area within a distance of **1.5 times the height** of the structure being demolished. - A. 1.2 times the height of the structure - B. 2.0 times the height of the structure - C. **1.5 times the height of the structure** - D. 3.0 times the height of the structure ## 97. Vertical Pipe Definition - A **Riser** is a vertical pipe used to transport fluids between different floors of a building. - A. Drain - B. Conduit - C. **Riser** - D. Vent ## 98. Plan View Definition - A **Plan View** is a scaled drawing representing the layout of a structure as seen from above, detailing the arrangement of spaces, walls, and features. - A. **Plan View** - B. Section View - C. Isometric View - D. Elevation View ## 99. Corrosion-Resistant Coating - **Epoxy** is a common protective coating for enhancing corrosion resistance and durability of pipes and appliances. - A. **Epoxy** - B. Latex - C. Polyurethane - D. Acrylic ## 100. Surveying Type Acknowledgment - **Geodetic Surveying** is the type of surveying that takes the curvature of the Earth into account. - A. **Geodetic Surveying** - B. Plane Surveying - C. Topographic Surveying - D. Hydrographic Surveying ## 101. Competency Standards Defined - **Competency Standards** define the required skills, knowledge, and attitudes necessary for effective job performance in the workplace. - A. Work Ethics - B. **Competency Standards** - C. Training Manuals - D. Job Description ## 102. Concrete Retarder Example - A commonly used chemical compound as a retarder in concrete is **Calcium lignosulphonate**. - A. Calcium chloride - B. Aluminum powder - C. Potassium carbonate - D. **Calcium lignosulphonate** ## 103. Sub-base Thickness Determination - The minimum thickness for one layer of compacted granular sub-base should be **20 cm**. - A. 10 cm - B. **20 cm** - C. 15 cm - D. 12 cm ## 104. Hazard Control Classification - The type of hazard control that involves replacing a toxic or hazardous material with a less harmful one is termed **Substitution**. - A. **Substitution** - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control

Iceberg demonstrates the relationship between direct and indirect costs of accidents, showing that on average, indirect costs exceed direct costs. Examples of indirect costs include: - a) Overhead costs - b) Schedule delays - c) **Medical costs** (DIRECT COST) - d) Cleanup time ## 7. Geometric Sequences - **Sequence Identification:** The proper arrangement of the following shapes by their complexity is: I. Quadrilateral II. Parallelogram III. Rectangle IV. Square. - a) II, IV, III, I - b) I, II, III, IV - c) IV, III, II, I - d) I, III, II, IV ## 8. Building Use Classification - The term **Occupancy** refers to a type of use of a building for interior space such as an office, restaurant, private residence, or school, grouped based on similar life-safety characteristics, fire hazards, and combustible contents. - a) Building elements - b) **Occupancy** - c) Building Code - d) Accommodation ## 9. Construction Pit Transport Fees - The maximum distance, as specified in the construction contract, which the contractor is expected to transport soil material without receiving additional payment, is known as **Freehaul distance**. - a) **Freehaul distance** - b) Overhaul distance - c) Haul distance - d) Baseline distance ## 10. Retarder Application Principles - **Fundamental Principles for Upper Retarders:** The retarder should be as near as possible to the warm side of the insulation or the warm face of the assembly. Moreover, it should be installed using a method appropriate for the specific condensation hazard. ## 11. Material Characteristics - **Hardness**: A measure of a material's ability to resist indentation or penetration. - a) **Hardness** - b) Ductility - c) Toughness - d) Resilience ## 12. Soil Density Changes - **Consolidation**: An increase in the soil density of cohesive soil resulting from the expulsion of water from the soil's void spaces. - a) Segregation - b) **Consolidation** - c) Compaction - d) Soil Stabilization ## 13. Concrete Finishing Process - The correct step-by-step process of finishing standard weight concrete slabs is as follows: 1. Bleeding 2. Screeding 3. Leveling 4. Edging 5. Jointing 6. Floating 7. Troweling 8. Broom finishing ## 14. Safety Oversight Authority - The entity given authority to review reports of inspection, accident investigations, and the implementation of the program is the **Health and Safety Committee**. - a) **Health and Safety Committee** - b) DOLE - c) DPWH - d) BFP ## 15. Soil Grouting Process - The process of injecting any agent into soil or rock to increase its strength or stability, protect foundations, or reduce groundwater is termed **Grouting**. - a) **Grouting** - b) Pumping - c) Bleeding - d) Screeding ## 16. Construction Safety Program Requirements - Every construction project must have a suitable **Construction Safety and Health Program**, which adheres to the rules and orders issued by the DOLE. - a) **Construction Safety and Health Program** - b) Occupational Health and Safety Program - c) Occupational Safety and Health Administration - d) Workplace Safety and Procedures ## 17. Safety Sight Distance and Vehicle Characteristics - One of the provisions for safety sight distance is dependent on the characteristics of the vehicle, including: - I. Type of vehicle (car or truck) - II. Friction between the tire and road - III. Eye height of the driver - IV. Speed of the vehicle - a) I only - b) II and III only - c) IV only - d) **All of the above** ## 18. Concrete Leveling Technique - **Screeding** is the process to level a floor or layer of concrete with a straight edge using a back and forth motion while moving across the surface. - a) Troweling - b) **Screeding** - c) Floating - d) Finishing ## 19. Structural Support Types - A structure driven into the soil to support construction by transferring building loads to a deeper and stronger layer of soil or rock is referred to as a **Pile**. - a) Caisson - b) Pier - c) Shoring - d) **Piles** ## 20. Road User Guidance Signs - **Guide signs** inform and advise road users of directions, distances, routes, and the location of services. - a) Cross road sign - b) **Guide signs** - c) Advance direction signs - d) Traffic instruction signs ## 21. Delay Concept in Transportation - The **Delay** refers to the difference between the actual travel time and the ideal travel time for a segment of the transportation system. - a) Queue time - b) Travel time - c) **Delay** - d) Service time ## 22. Construction Instructions - **Specifications** are written instructions detailing how a facility is to be constructed. - a) **Specifications** - b) Estimates - c) Bid documents - d) Plans ## 23. Tidal Wave Phases - The interval referring to the time delay in highest tide for each location due to cosmic forces and friction is called the **Age of Tides**. - a) **Age of Tides** - b) Lunar tide - c) Diurnal tide - d) Semi-diurnal tide ## 24. Road Environment Factors and Safety Sight Distance - The provision for safety sight distance is influenced by the following characteristics of the road environment: - I. Road geometry - II. Road surface - III. Road illumination at night - IV. Road topography - a) I and IV only - b) I, II, and III only - c) II and IV only - d) **All of the above** ## 25. Pavement Cracking Types - **Transverse cracking** occurs at right angles to the pavement centerline due to shrinkage or differential thermal stress of the asphalt concrete or reflective cracks. - a) Alligator cracking - b) Block cracking - c) **Transverse cracking** - d) Longitudinal cracking ## 26. Pavement Surface Wear - **Raveling** refers to the wearing away of the pavement surface caused by dislodging of aggregated particles and binder, often a result of insufficient asphalt binder in the mix. - a) Joint or crack spalling - b) Flushing - c) Bleeding - d) **Raveling** ## 27. Surveying Procedures - **Double centering** is a procedure in a horizontal angle layout that involves turning the angle twice and creating a line of sight for critical points. Not used on every point. ## 28. Fatigue Resistance Measure - **Fatigue resistance** is the measure of a material's ability to withstand cyclic (repeated) stresses, with the risk of fracture occurring without warning, even below yield strength. ## 29. Screeding Definition - **Screeding** is defined as the method of moving a straight-edge back and forth with a saw-like motion across the forms to finish concrete surfaces. ## 30. Hazard Definition - A **Hazard** is defined as a source or situation that poses a potential risk for harm, injury, or damage to health, property, or the environment. ## 31. Risk Definition - **Risk** is defined as a human action that deviates from commonly accepted safe procedures that may result in an accident; it requires adherence to a suitable Construction Safety and Health Program, per DOLE requirements. ## 32. Loading Zones - **Loading and unloading zone markings** must be red in color. ## 33. Project Definition - A **Project** is a series of activities with specified objectives that have defined start and end dates, monitored planning, and resource consumption, including money, labor, and equipment. - a) **All of the above** - b) I, II, IV, and V - c) I, II, and IV - d) I, III, and V ## 34. Contract Changes - The following reasons may cause a contract change, except for: - a) Unforeseen conditions - b) **Poor jobsite productivity** - c) A change in owner requirements - d) Designer omission or error ## 35. Road Condition Characteristics - Factors affecting safety sight distance based on the road environment include: - I. Road geometry-grade and curvature sight limitations - II. Road surface-sealed or unsealed, and its smoothness - III. Road illumination at night - IV. Road topography - a) I, II, and III only - b) **All of the above** - c) I, III, and IV only - d) II, III, and IV only ## 36. Structural Properties in Coastal Construction - Key structural properties vital for material selection in harbor and coastal construction include: - I. Specific gravity - II. Material strength - III. Resistance to cyclical impact loading - IV. Resistance to seismic forces - V. Material flexibility - VI. Structural size - a) I, II, and III only - b) IV, V only - c) I, III, and IV only - d) **All of the above** ## 37. Piling Definition - **Piles** are structural components driven into the soil transferring building loads to deeper and stronger soil or rock layers. ## 38. Trip Definition - A **Trip** is defined as the basic unit of travel behavior, involving movement from a single origin to a single destination, characterized by origins, destinations, purposes, and travel modes. ## 39. Signal Coordination - **Signal coordination** involves timing signals in relation to one another, allowing vehicles traveling at a determined speed to pass through successive green lights. ## 40. Rumble Strip Purpose - A **Rumble strip** is a type of thermoplastic lane marking that provides motorists with visual, audio, and motion warnings on the road. ## 41. Grade Resistance - **Grade resistance** represents the component of vehicle weight that acts parallel to an inclined surface. ## 42. Hazard Circumstances - **Hazard** refers to circumstances that deviate from standard conditions, permitting occurrences of accidents or incidents. ## 43. Demolition Area Restrictions - During demolition, no one except workers directly engaged in demolition shall enter an area within a distance equal to 1.5 times the height of the structure being demolished. ## 44. Logistic Definition - **Logistics** refers to the strategic management of resources, materials, and information to ensure efficient movement and delivery of goods and services. ## 45. Design Speed - **Design speed** refers to the maximum safe speed that can be maintained over a specified section of highway under favorable conditions governed by design features. ## 46. Bid Bond Valid Statement - A valid statement regarding a **bid bond** is that it represents costs incurred by the owner if the bidder fails to enter into a contract. - a) It pays for costs incurred by the bid deadline is mixed. - b) **It represents the costs that the owners incur if the bidder fails to enter into a contract.** - c) It represents costs incurred by subcontractors if the project is underbid. - d) It pays for office overhead costs related to a bid ## 47. Hygroscopic Material Definition - **Hygroscopic** refers to a substance that tends to absorb water from the air. ## 48. Safe Pile Capacity Data - The safe capacity of piles driven by powered hammers is based on data comprising: - I. Average penetration per blow (last six blows) - II. Energy of hammer - III. Weight of hammer - IV. Weight of pile including appurtenances - V. Coefficient of restitution based on pile weight - VI. **All of the above** ## 49. Berth Structure Definition - A **Pier** is a berth structure projecting out from the shoreline. - a) Groin - b) Wharf - c) Breakwater - d) **Pier** ## 50. Road Alignment Signs - **Chevron signs** are used to guide drivers through a change in the horizontal alignment of the road. - a) **Chevron signs** - b) Supplementary signs - c) Guide post signs - d) Delineators ## 51. Road Delineation Devices - Delineation of road alignment includes: - I. Pavement Markings - II. Signs - III. Guide Posts - IV. Reflective delineators - V. Lighting - VI. Curb or other physical devices - a) I, II, II, and IV only - b) I, II, IV, and VI only - c) I, V, V, and VI only - d) **All of the above** ## 52. Properties of Queuing Diagrams - Important properties in queuing diagrams include: - I. The slope of D(t) is the departure rate; the slope of A(t) is the arrival rate. - II. The departure rate cannot exceed the service rate or capacity of the server. It may be less. - III. Cumulative departures can never exceed cumulative arrivals. D(t) can never be above A(t) in the queuing diagram. - IV. When a queue exists, the departure rate equals the service rate. In the absence of a queue, the same rate equals the arrival rate. - V. **All of the above** ## 53. Scaffolding Capacity Brackets - Capacity requirements for all scaffolding must be: - a) At least four times its own weight - b) At least 6 times its own weight - c) At most 6 times its own weight - d) At most 5 times its own weight ## 54. Highway Driver Elements - The essential elements of highway driving are referred to as **Driving Task**, encompassing navigation, guidance, and control. - a) **Driving task** - b) Ergonomics - c) Engineering psychology - d) Range index ## 55. Protective Systems in Excavation - **Protective systems** include methods for protecting workers from cave-ins during excavations, consisting of support systems, sloping, benching systems, and shield systems. - a) **Protective system** - b) Personnel protective system - c) Fall arrest system - d) Level arrest system ## 56. Bucket Volume Definitions - **Bucket load capacity** refers to the volume contained within the bucket outline as determined by the bucket sides. - a) Plate line capacity - b) Water line capacity - c) Heap volume - d) **Bucket load capacity** ## 57. Contract Definition - A **Contract** is defined as a formal or legally binding agreement between two parties. ## 58. Toolbox Meeting Definition - A **Toolbox Meeting** is an informal group discussion that focuses on a specific safety issue, facilitating health and safety culture discussions on job sites. ## 59. Road User Directional Signs - **Guide signs** inform road users about the directions and distances to destinations on their route or intersecting roads. - a) Supplementary signs - b) **Guide signs** - c) Warning signs - d) Stack signs ## 60. Specifications Definition - **Specifications** provide detailed requirements for materials, equipment, and workmanship for projects. - a) **Specifications** - b) Bid documents - c) Estimates - d) Plans ## 61. Damping Capacity - **Damping capacity** is the measure of a material’s ability to absorb or dissipate mechanical vibrations. ## 62. Profile Drawing Definition - A **Profile** is a drawing with elevation as the vertical axis and horizontal distance measured along the centerline as the horizontal axis. ## 63. PERT CPM Network Preparation - When preparing a report on the PERT CPM network in construction, one should consider: - a) Pessimistic time network - b) Optimistic time - c) Probable time - d) **All of the above** ## 64. Post-Construction Resolution - This occurs after completion of construction and the resolution of the majority of punchlist and commissioning issues, known as the **Profile**. ## 65. Concrete Formwork Concept - **Formwork** is necessary for concrete placement to maintain shape before the concrete sets. ## 66. Benching Technique in Excavation - **Benching** is a method of protecting workers from cave-ins by creating a series of horizontal levels or steps in excavated areas. - a) **Benching** - b) Shoring - c) Shielding - d) Fall arrest system ## 67. Concrete Surface Leveling - The process of leveling a concrete surface with enough mortar after screeding is termed **Floating**. - a) **Floating** - b) Edging - c) Leveling - d) Bleeding ## 68. Control Joint Placement in Concrete - **Jointing** involves placing premolded inserts in concrete slabs to control cracking due to shrinkage, immediately after or during edging. - a) Jointing - b) Troweling - c) Leveling - d) Edging ## 69. Safety Barrier Considerations - Reasons to establish a need for safety barriers include: - I. Fore slope and back slope steepness and height - II. Unforgiving hazards within the clear zone - III. Water hazards within the clear zone - a) II only - b) I only - c) II and III only - d) **All of the three** ## 70. Limits on Road Messages - Messages painted on pavement should be limited to **six words or less**. - a) **six words or less** - b) five words or less - c) four words or less - d) three words or less ## 71. Types of Pavement Markings - The four types of pavement and curb markings include: - a) **longitudinal lines, transverse lines, lane lines, and center lines** - b) longitudinal lines, transverse lines, stop lines, & center lines - c) longitudinal lines, transverse lines, transition lines, & stop lines - d) longitudinal lines, transverse lines, other lines, & other markings ## 72. Overtaking Lane Design Considerations - Design considerations for overtaking and climbing lanes include: - I. Initial diverge taper - II. Auxiliary lane length - III. End or merge taper - a) **I, II, & III** - b) I & II only - c) II & III only - d) I & III only ## 73. Road Density Definition - **Density** is defined as the number of vehicles per unit distance occupying a roadway section at a given instant in time, measured in vehicles per mile or kilometer. - a) flow - b) **density** - c) capacity - d) volume ## 74. Continuous Waterfront Structure - A **Wharf** is a continuous structure built parallel to the shoreline for loading and unloading ships. - a) pier - b) **wharf** - c) port - d) lighthouse ## 75. Vertical Design Factors - The minimum **K value** for sag vertical should be based on the following factors: - I. Safety sight distance for drivers - II. Appearance in low fill and flat areas - III. Riding comfort, especially at floodway approaches - IV. Vertical alignment fitting into natural terrain. - a) I, II, & III only - b) I, III, & IV only - c) I, II, & IV only - d) II, III, & IV only ## 76. Rumble Strip Definition - A **Rumble strip** is a thermoplastic lane marking designed for visual, audio, and motion warnings for motorists on the road. - a) regulatory signs - b) diagonal marking - c) chevron marking - d) **rumble strip** ## 77. Lane Line Continuation Rules - Lane lines must not be continued in the following scenarios: - I. Across signalized intersections, where low priority road lines must be discontinued. - II. Across side street entrances, except for one-way streets. - III. Past the start of the taper at multi-lane road narrows. - IV. On roads with more than two lanes without median islands. - a) I, II, & IV - b). I, II, & IV - c) II, III, & IV - d) I, II, and III ## 78. Directional Information Signs - **Guide signs** serve to inform road users about directions, distances to destinations, and service locations. - a) **guide signs** - b) warning signs - c) regulatory sign - d) traffic sign ## 79. Benefits of Shoulder Paving - **Shoulder paving** offers: - I. Integrity of the pavement - II. Width for edge line pavement markings - III. Enhanced safety to prevent vehicle skidding - IV. Lower maintenance costs compared to paved shoulders - a) I, III, & IV only - b) **all of the above** - c) I, II, & III only - d) II, III, & IV only ## 80. Structures Built into the Sea - A **Pier** is defined as a structure built into the sea but not aligned parallel to the coastline, which serves various purposes for vessels. - a) lighthouse - b) port - c) **pier** - d) wharf ## 81. Navigable Water Definitions - A navigable body of water leading to a harbor is referred to as a **Channel**. - a) fairway - b) **channel** - c) shoal - d) significant depth ## 82. Types of Curves in Roads - **Vertical curves** are typically parabolas centered around the point of intersection of vertical tangents they connect. - a) **vertical curve** - b) vertical tangent - c) spiral curve - d) grade ## 83. Wind-Generated Waves - Waves under wind influence are referred to as **Sea waves**. - A. Wakes - B. **Sea** - C. Swells - D. Seiching ## 84. Traffic Flow Rate - The **Capacity** refers to the maximum sustained rate of flow for vehicles (passenger cars per hour per lane) under uniform conditions on a freeway segment. - A. Density - B. Traffic flow - C. **Capacity** - D. Design hourly volume ## 85. Hazardous Condition Warnings - **Warning signs** inform road users about hazardous or unexpected road conditions. - A. Roadwork signs - B. **Warning signs** - C. Traffic signs - D. Guide signs ## 86. Purpose of Edge Lines - The purpose of **edge lines** includes discouraging shoulder travel, enhancing safety at night, guiding past hazards, and delineating the edge of the traveled way from the shoulder. - A. I - B. IV - C. V - D. II ## 87. Road Capacity Measurement - **Road capacity** is the maximum number of vehicles expected to pass over a given section of a roadway in one direction during one hour. - A. **Road capacity** - B. Flow of traffic - C. Density - D. Free flow ## 88. High-Rise Building Cleaners - For window cleaners of high-rise buildings, **Slung Scaffold** is most appropriate for providing a suspended working platform. - a) Birdcage Scaffold - b) **Slung Scaffold** - c) Cantilever Scaffold - d) Trestle Scaffold ## 89. Leading Workplace Fatalities - **Falls** are the leading cause accounting for more than 50% of workplace fatalities. - a) Slips - b) Trips - c) **Falls** - d) Electrocution ## 90. Excavation Material Placement - Excavated material should be kept from the excavation edge at a distance not less than **1/4** of the excavation depth. - a) **1/4** - b) 1/3 - c) 1/2 - d) 2/3 ## 91. Temporary Vertical Support Definition - **Dead Shore** refers to temporary vertical support installed directly beneath structural elements while repairs or foundation work is conducted. - A. **Dead Shore** - B. Lateral Bracing - C. Cantilever Prop - D. Raking Shore ## 92. Building Information Modeling - **Building Information Modeling** (BIM) is a 3D model-driven process generating a digital representation of facility features, supporting informed decision-making throughout its lifecycle. - A. CAD Drafting - B. **Building Information Modeling** - C. GIS Mapping - D. Structural Analysis Software ## 93. Operating Costs in Contracting - **Operating Cost** refers to expenses incurred while using equipment for project execution, including repair costs, parts replacement, fuels, labor, and storage. - A. I, II, III, IV - B. I, II, III, IV, V - C. I, II, III - D. II, III, IV ## 94. Water Supply Pipe Terminology - In a water supply system, the vertical pipes are referred to as **risers**, and the horizontal pipes as **branches**. - A. branches and risers respectively - B. **risers and branches respectively** - C. roughing ins and connections respectively - D. connections and roughing ins respectively ## 95. Joint Sealant Definition - A **Joint Sealant** is a rubber or rubber-like material used to fill and seal joints or openings, either alone or with other materials. - A. Grout - B. **Joint Sealant** - C. Adhesive - D. Mortar ## 96. Demolition Area Entry Restriction - During demolition, no one except those engaged in the work shall enter an area within a distance of **1.5 times the height** of the structure being demolished. - A. 1.2 times the height of the structure - B. 2.0 times the height of the structure - C. **1.5 times the height of the structure** - D. 3.0 times the height of the structure ## 97. Vertical Pipe Definition - A **Riser** is a vertical pipe used to transport fluids between different floors of a building. - A. Drain - B. Conduit - C. **Riser** - D. Vent ## 98. Plan View Definition - A **Plan View** is a scaled drawing representing the layout of a structure as seen from above, detailing the arrangement of spaces, walls, and features. - A. **Plan View** - B. Section View - C. Isometric View - D. Elevation View ## 99. Corrosion-Resistant Coating - **Epoxy** is a common protective coating for enhancing corrosion resistance and durability of pipes and appliances. - A. **Epoxy** - B. Latex - C. Polyurethane - D. Acrylic ## 100. Surveying Type Acknowledgment - **Geodetic Surveying** is the type of surveying that takes the curvature of the Earth into account. - A. **Geodetic Surveying** - B. Plane Surveying - C. Topographic Surveying - D. Hydrographic Surveying ## 101. Competency Standards Defined - **Competency Standards** define the required skills, knowledge, and attitudes necessary for effective job performance in the workplace. - A. Work Ethics - B. **Competency Standards** - C. Training Manuals - D. Job Description ## 102. Concrete Retarder Example - A commonly used chemical compound as a retarder in concrete is **Calcium lignosulphonate**. - A. Calcium chloride - B. Aluminum powder - C. Potassium carbonate - D. **Calcium lignosulphonate** ## 103. Sub-base Thickness Determination - The minimum thickness for one layer of compacted granular sub-base should be **20 cm**. - A. 10 cm - B. **20 cm** - C. 15 cm - D. 12 cm ## 104. Hazard Control Classification - The type of hazard control that involves replacing a toxic or hazardous material with a less harmful one is termed **Substitution**. - A. **Substitution** - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control ## 2. Substitution - B. Elimination - C. Engineering Control - D. Administrative Control

Vocabulary Study Guide: Benjamin Franklin for English III

072: Benjamin Blümchen (Second Edition)