Weekly Test 1

Wye

A hose connection with two-gated outlets permitting two connections of the same or smaller coupling diameter to be taken from a single supply line.

3 m

IPS shall be supported at ___ intervals for piping 19 mm diameter and smaller.

Flushometer Tank

Integrated within an air accumulator vessel which is designed to discharge a predetermined quantity of water into fixtures for flushing purposes

water-sealed trap

Each fixture directly connected to the drainage system shall be equipped with a _____.

Polybutylene

Tube made of plastic material and colored black. The cross-sectional shape is normally oval and is denoted by its outside diameter or 0.D.

7.48 gallons per minute or 28.3 liters per minute or 1 cu.ft per minute

1 fixture unit is equal to?

Reynald B. Ilagan

Who is the current chairman of the Board of Examiners for Master Plumber?

plumbing fixtures are installed

Every building where _____ shall have a sewer service connection to a public or private sewer systems.

PD 856

Code on Sanitation of the Philippines

Flood Level Rim

The top edge of a receptacle from where water overflows.

Return bend

An open return bend usually made up of two 90° bends

Slip Joint

An adjustable tubing connection, consisting of a compression nut, a friction ring, and a compression washer, designed to fit a threaded adapter fitting or a standard taper pipe thread.

14

What is the accreditation number of NAMPAP?

45 degrees

Distance of bottom of all pipe tranches to the footing of any adjacent building or structure parallel to it

25.4 mm

Depth of the molten pig lead in a caulked joint

PD 1185

The Old Fire Code of the Philippines

40 years

The Plumbing Code has been in existence for almost _____ since its promulgation before it has been amended.

American Society for Testing and Materials

ASTM means?

8”

Roughing-in of cold and hot water supply line are ideally distanced at least _____ apart.

Practical Problems

This examination subject in Master Plumbing was originally split into two.

17th

The birth of the plumbing profession in the Philippines is traced back to the ___ century.

14.63 kg per sqm

Minimum weight of a lead for flashing or vent terminals

6 m

What is the standard length of Galvanized Iron Pipe?

blank flange

A pipe flange that is not drilled for bolt holes.

38 mm

Trap arm size of Laundry Tub

Alteration

Any change, addition or modification in construction or occupancy

Type L

Copper tube for water supply piping shall have a weight of not less than _____.

failure to pay the required fees

The following are grounds for non-issuance of the  certificate of registration by the Board of Master Plumbers except for _____.

0.75 m

The distance of water closet or bidet center to center

2”

For caulked-on closet ring, the minimum overall depth shall be:

30

Each member of the board, shall at the time of his appointment be at least _____ of age.

double hub

Preferred when a piece of pipe needed is shorter than 150 cm long

screwed pipe

Vertical support of _____ is placed not less than every other storey height. 

120 days

A plumbing permit shall become null and void if the plumbing work has been suspended or abandoned for a period or _____.

1935

The year when NAMPAP was organized and registered with the Securities and Exchange Commission

Decrease in DFU loading

What will happen if a drainage piping is placed at slope of 10mm/m due to structural conditions?

140 deg. F

Common maximum service temperature rating of PVC

bitumastic coating

Copper tubing shall be fully externally protected with a/an _____ and fiberglass wrapping installed inside a split rigid casing whenever installed underground. 

red

Color for Type M copper pipe

Red with White Lettering

(ANSI) Pipe Color code for Fire Quenching

19 mm

Wiped lead joints shall have an exposed surface on each side of a joint not less than _____.

6

All plumbing plans, drawings, diagrams, etc. shall be submitted in ___ sets for permit application.

3

The Administrative Authority must be notified at least ___ working days before such inspection is intended.

October 2, 1975

Date of the Accreditation of NAMPAP

Plumbing Official

Which authority is responsible for the administration and enforcement of the National Plumbing Code?

Plumbing Appliance

A water heater is classified as?

Code of Ethics no. 2

A registered master plumber must not supplant another Registered Master Plumber after definite steps have already been taken toward his/her being commissioned to perform the contract

Sewer

A pipe or conduit for carrying sewage and wastewater .

IAPMO

Elastomeric gasketed and rubber-ring joints shall comply with _____ installation standard

Urinal

What is not included in a plumbing unit?