air flow cleaning

Step 1 for Cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Unclog/clean the lumina inside the nozzle using the "EASY CLEAN" (white plastic tube)

Step 2 for Cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Placing the "Easy Clean" through the central lumina of the nozzle

Step 3 for Cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Insert a monojet filled with Spring water into the open end of the easy clean and rinse several times

Step 4 for Cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

If the nozzle is clogged a light pressure shall be applied. The water passing through the nozzle will completely dissolve the remaining powder inside the lumina

Step 5 for Cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Place the "Easy clean" and Nozzle in the ultrasonic for 16 min

Step 6 for cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Remove the easy clean and nozzle from the ultrasonic and rinse the lumina using enzymax and a monojet at least 5 times

Step 7 for cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Submerge the 'Easy Clean' and the nozzle in Spring water

Step 8 for cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Rinse through the lumina with Spring water at least 3 times using a monojet syringe

Step 9 for cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Repeat the cleaning process if the last rinse does not run clear

Step 10 for cleaning and sterilizing the (WHITE) Air-Flow air Polishing nozzle

Dry the nozzle in the dryer and place in a sterilization bag and sterilize

How do you unclog the lumina inside the air polishing nozzle?

Use the black plastic tube and wire rod, and unclog the tip with the small end of a needle.

What is the next step after unclogging the lumina inside the air polishing nozzle?

Rinse the lumina with Spring water and monojet.

What is the third step in cleaning and sterilizing the air polishing nozzle?

Place the nozzle in the ultrasonic for 16 minutes.

What should you do after placing the air polishing nozzle in the ultrasonic?

Rinse the nozzle and place it in a denture bag with lemon juice overnight.

What is the next step after leaving the air polishing nozzle in lemon juice overnight?

Rinse the nozzle and pass Spring water through it using a monoject and black plastic tube.

What is the final step in cleaning and sterilizing the air polishing nozzle?

Dry the nozzle in the dryer, place it in a sterilization bag, and sterilize it.