2.4 Distal Radius System

Step 1

Attach distal radius to radial and intermediate part of bone

Step 2

With a 2.4 or 2.7 drill guide drill into elongated hole

Step 3

Measure screw length with a depth gauge

Step 4

Add a 2.4 or 2.7 cortex screw in the elongated hole in the plate shaft.

Step 5

Add k wires if necessary to the hole around the a-g hoels

Step 6

Use LCP Drill guide or 2.4/2.7 drill guide into threaded combi hole.

Step 7

Measure with depth gauge

Step 8

screw in 2.4 locking screw or 2.4/2,7 cortex screw

Step 9

Use 30* or fixed angle drill guide with a 1.8 drill to get hole

Step 10

use c-arm to get correct angle and depth gauge to length

Step 11

Screw in 2.4 locking screw until seated.

Step 12

use .8 torque limiter to finalize screw into place

Step 13

Repeat until complete

Step 14

Stitch patient