Basic safety first test

turnover

companies with strong safety cultures usually have lower

safety is a learned behavior and attitude

which of these is a true statement regarding safety?

unsafe conditions

poor lighting, excessive noise, and inadequate guards for moving parts are examples of

job safety analysis

the activity consists of breaking a job into its component task and then analyzing each step for potential hazards is called a

evaluation

a measure of the probability, consequences, and exposure related to an event is referred to as

cover the opening and label the cover

if there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to

in the middle of the back

the D-ring or support point on a safety harness should be placed

competent person

a personal fall arrest system should be inspected monthly by a

positioning

lanyards that have no shock absorbing features are used for

3 feet

when placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least

toe-boards, debris nets, or canopies must be applied

when performing overhead work on scaffolding, what protective measures must be taken to prevent objects from falling and striking a person below

4:1 height-to-base ratio

when stacking materials such as bricks or block, do not stack materials beyond a

Type C soil

benching systems are prohibited in

Type C

in the absence of other information, all soil in an excavation should be treated as if it is

competent person

daily inspection of excavation must be performed by a

three-wire system

one of the most common grounding systems used for protection against accidental electrical shock is the

double-insulated tools

a polarized electrical receptacle is used for

lockout/tagout

a system that protects workers from the release of hazardous energy while they work with machines and equipment is referred to as

the person who applied them

in a lockout/tagout situation, a personal lock and tag must be removed by

reinforced plastic

hard hats should be made of fiberglass or

2 feet away

a good general rule about hearing protection is that it should be used if you must raise your voice for someone to hear you when they are

report it to a supervisor and avoid disturbing it

when there is a potential to be exposed to asbestos, workers must

half mask or mouth piece with a mechanical filter

the respirator that would be used where dust or solid particles might be inhaled is a

paint

one source of lead on some job sites is

blood

hepatitis can be caused by contact with

the body temperature rises slightly

heat exhaustion differs from heat stroke in that

heat stroke

which of the following conditions is considered life threatening

screen the work area with welding shields

when other workers are working near a welding operation, the standard practice is to

class C

what type of fire extinguisher would be used on an electric motor that has overheated and caught fire

entry permit

the type of permit that must be issued before a permit required confined space can be accessed is called an