PM4 Maintenance Interval Schedule (MIS): Backhoe Loader Family

Failure to lock out equipment before working on it accounts for:

1. 2% of the industrial accidents each year

2. 5% of the industrial accidents each year

3. 10% of the industrial accidents each year

4. None of the answers are correct

10% of the industrial accidents each year

Check the transmission oil level with the engine ON. (True or False)

False

You should warm the machine to:

1. Operating temperature

2. Cycle all controls

3. Move the machine to warm and circulate oil

4. None of the answers are correct

Move the machine to warm and circulate oil

The transmission oil level should be at the _____________ level when the engine is OFF.

1. "CHECK WITH WARM OIL"

2. MAX

3. "Safe to Start"

4. None of the answers are correct

“Safe to Start”

The #1 priority of any job is:

1. Attire

2. Safety

3. Correct technique

4. None of the answers are correct

Safety

To ensure safety in respect to attire, you should:

1. Wear safety glasses

2. Wear safety shoes

3. Do not wear finger rings

4. All of the answers are correct

All of the answers are correct

When checking the engine coolant level, don't just check the overflow bottle, also check the level in:

1. The engine

2. You don't need to check elsewhere

3. The radiator

4. All of the answers are correct

The radiator

"Right" and "left" on the machine is determined by:

1. The operator's sitting position in the cab.

2. Looking at the back of the machine.

3. Looking at the front of the machine.

4. None of the answers are correct.

The operator’s sitting position in the cab

Before the lines and components can be removed, you must:

1. Change the oil in the transmission.

2. Disconnect the battery.

3. Release the pressure in the hydraulic system.

4. All of the answers are correct.

Release the pressure in the hydraulic system

Inspect all magnetic drain plugs for:

1. Leaks

2. Metal

3. Loose parts

4. None of the answers are correct.

Metal

Make sure to wash the suction screen in:

1. Clean nonflammable solvent

2. Alcohol

3. Water

4. None of the answers are correct.

Clean nonflammable solvent

When replacing a canister filter, be sure to:

1. Remove the drain plug

2. Drain the canister prior to removal

3. Clean the canister

4. All of the answers are correct

All of the answers are correct

To reduce contamination to the system when changing filters:

1. Use a lint-free cloth

2. Do not remove filter from packaging until just before installation

3. Clean around filter and filter base

4. All of the answers are correct

All of the answers are correct

Contamination is more problematic with the:

1. Spin-on filter

2. Canister filter

3. Any type of filter

4. None of the answers are correct

Any type of filter

When installing the breather back into the axle housing:

1. Make sure the slot in the breather is parallel to the axle housing.

2. Make sure the breather is clean.

3. Make sure the area around the breather is clean.

4. All of the answers are correct

All of the answers are correct

If a funnel must be used to refill oil, be sure to use a:

1. Short-neck funnel

2. Long-neck funnel

3. Any length of funnel

4. None of the answers are correct

Short-neck funnel

Check the OMM for the recommended transmission oil level on the machine being serviced. (True or False)

True

When priming the fuel system:

1. Be sure to open the fuel shut off valve before starting the engine

2. Prime the fuel system once the filters have been changed

3. Refer to the OMM on priming for the machine you are servicing

4. All of the answers are correct

All of the answers are correct

When replacing the primary and secondary air filter elements:

1. Be sure to bump and tap the air filter elements

2. Inspect the O-Ring seal on the air cleaner cover

3. Disregard the condition of the filters

4. None of the answers are correct

Inspect the O-Ring seal on the air cleaner cover

The secondary air filter cannot:

1. Be used on a wheel loader

2. Be replaced

3. Be cleaned

4. None of the answers are correct

Be cleaned

When lubricating the control console latch, make sure to lubricate:

1. The pivot for the release lever

2. The rotor axle

3. The axle for the catch

4. All of the answers are correct

All of the answers are correct

Do not apply lubricant to:

1. Front wheel bearings

2. The wear pads on the extendable stick

3. Quick coupler

4. All of the answers are correct

The wear pads on the extendable stick

Never remove the radiator cap unless the engine is:

1. On

2. Warm

3. Cold

4. None of the answers are correct

Cold

The Active Diagnostic Codes can also be accessed:

1. By pressing the Function key "F5"

2. By pressing the Function key "F2"

3. By pressing the Function key "F3"

4. None of the answers are correct

By pressing the Function key “F3”

FMI stands for:

1. Filter ID

2. Format ID

3. Failure Mode ID

4. None of the answers are correct

Failure Mode ID