AGRICULTURAL PROCESSING, STRUCTURES, ELECTRIFICATION, AND ALLIED SUBJECTS - PART 9

20 psi

Minimum pipeline pressure for water supply system in slaughter house

Condemned meat

Meat which is unfit for human consumption as declared by a veterinary inspector after veterinarian examination

Detained meat

Meat requiring further examination as declared by a veterinary inspector after veterinarian examination

Scalding

Lowering of animal into a steam to prepare skin for dehairing

Flaying

It is the removal of the hide of the carcass

Gambrelling

It is the process of suspending the carcass for particular operation

Stunning

It renders the animal insensible before it is killed.

Pithing

It is the insertion of a rod or a coiled wire through the hole in the skull of the cattle made by captive blot to destroy the brain and the spinal cord to prevent reflex muscular action and possible injury to opertaives

Sticking

It is the severe of the major blood vessels in the neck or immediately anterior to the heart by means of a knife.

600 mm

Site for slaughter house should be elevated ___above the adjacent ground

2.5 m x 6.4 m

Recommended dimension for slaughter house for large animal with throughput rate of 30 animals/day is _____

45 deg

Recommended slopes for wall tops of slaughter house

150 mm

Recommended thickness of concrete slabs for slaughter house

10 mm φRSB

Size of reinforcement bars for concrete slabs in slaughter house

1 m above the floor

Recommended height of windows for slaughter house

1.5 m wide

Minimum width of the doorways for slaughter house

1 inlet

Number of drain inlet provided in the slaughter house for 40 m2 space

2448 W

A 12 amperes electric fan and blower with a power factor of 0.85 was connected to a 240 volts convenient outlet. Calculate the power in the circuit.

consider eff (0.85)= 20.35 A
no eff = 17.29 A

Compute the input current on a 5 hp electric motor used to drive a hammer mill at 2200 rpm. The input voltage is 220 with a power factor of 0.98.

4.8 A

A mercury lamp having a hot resistance of 50 ohms is connected to a socket with 240 volt current supply. How much current flows through the lamps?

2448 W

A 12 ampere electric fan and blower with a power factor of 0.85 was connected to a 240 volts convenient outlet. What is the power in the circuit?

24 ohms

A water heater draws 10 ampere at 240 volt current supply. What is the heat resistant of the wire?

240 V

A circuit has a resistance of 20 ohms and the amount of current flowing is 12 amperes. What is the voltage?

• 24 A at 120 V

• 48 A at 240 V

What is the current flowing in a circuit having a resistance of 5 ohms on 120 volt and 240 volt current supply?