A. POWERPLANT

0.0(0)
studied byStudied by 2 people
GameKnowt Play
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
Card Sorting

1/19

encourage image

There's no tags or description

Looks like no tags are added yet.

Study Analytics
Name
Mastery
Learn
Test
Matching
Spaced

No study sessions yet.

20 Terms

1
New cards

The fuel required to produce a unit of thrust

What does the term specific fuel consumption refer to?

2
New cards

Axial Flow turbine

Which type of turbine is commonly used in modern jet engines

3
New cards

Better fuel efficiency

What is the primary advantage of using turbofan engine over a turbojet engine?

4
New cards

Supply air to the engine

What is the primary purpose of the induction system in an aircraft engine

5
New cards

to enhance lubrication and reduce wear

what is the primary purpose of oil additives in aircraft engines?

6
New cards

lower the temperature of cabin air

the function of the evaporator in freon cooling system is to

7
New cards

LOW

when checking a freon system, a steady stream of bubbles in the sight gauge indicates the charge is

8
New cards

high pressure vapor

what is the condition of refrigerant as it enters the condenser of a vapor cycle cooling system?

9
New cards

high pressure liquid

what is the condition of the refrigerant as it leaves the condensers of a vapor cycle cooling system?

10
New cards

pressure reducer valve

what is used in some oxygen systems to change high cylinder pressure to low system pressure

11
New cards

sensing

in which control element of an autopilot system is an attitude indicator?

12
New cards

servo

WHAT COMPONENT OF AN AUTOPILOT SYSTEM APPLIES TORQUE TO THE CONTROL SURFACES OF AN AIRCRAFT?

13
New cards

to reduce vibration and noise

IN A TWIN- ENGINE AIRCRAFT, WHAT IS THE PURPOSE OF SYNCHRONIZING THE PROPELLERS?

14
New cards

IT ROTATES AT A HIGHER RPM THAN SAFE LIMITS

WHAT HAPPEN WHEN A PROPELLER IS OVER SPEEDING?

15
New cards

blade back

WHICH OF THE FOLLOWING IS IDENTIFIED AS THE CAMBERED OR CURVED SIDE OF A PROPELLER BLADE, CORRESPONDING TO THE UPPER SURFACE OF A WING AIRFOIL SECTION?

16
New cards

HUB TO TIP

PROPELLER BLADE STATION NUMBERS INCREASE FROM:

17
New cards

PROVIDE SPARK FOR IGNITION

WHAT IS THE PURPOSE OF THE MAGNETO IN AN AIRCRAFT ENGINE

18
New cards

BEARING

WHICH COMPONENT IN A RECIPROCATION ENGINE HELPS REDUCE FRICTION BETWEEN MOVING PARTS

19
New cards

GENERATE ELECTRICAL POWER

WHAT IS THE PRIMARY FUNCTION OF THE ALTERNATOR IN AN AIRCRAFT ENGINE

20
New cards

COOL THE AIR BEFORE IT ENTERS THE ENGINE

WHAT IS THE PURPOSE OF AN INTERCOOLER IN A TURBOCHARGED ENGINE