ULTIMATE FINAL STUDY SET

0.0(0)
studied byStudied by 0 people
0.0(0)
call with kaiCall with Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/46

encourage image

There's no tags or description

Looks like no tags are added yet.

Study Analytics
Name
Mastery
Learn
Test
Matching
Spaced
Call with Kai

No study sessions yet.

47 Terms

1
New cards

1

Standby: pull keeper ring quietly

2
New cards

2

Mar: Hold lines together to create friction

3
New cards

3

Release lock quietly

4
New cards

4

Pull back line to take piece out

5
New cards

5

GO: Move line in or out

6
New cards

6

Don’t: crash arbor into rail or pull up on the line

7
New cards

7

Relock: and replace keeper ring

8
New cards

Bowline knot purpose

Strong knot with a fixed loop that will not cinch down on itself.

9
New cards

Clove hitch purpose

Connect rope to a pipe and must have a half hitch on top.

10
New cards

Clove hitch on a bight purpose

Using end of pipe to slip knot onto

11
New cards

List some engineered wood?

OSB, MDF, plywood, Masonite, particle board

12
New cards

Tie a clove hitch

I did it!

13
New cards

Tie a bowline

I did it!

14
New cards

Tie an alpine butterfly

I did it!

15
New cards

What is pipe weight?

Amount of weight to put on arbor when batten is empty

16
New cards

What do Broadway flats require?

Keystones and corner blocks

17
New cards

How to assemble Hollywood flats?

Rails and stiles directly stapled

18
New cards

Tie a figure 8 knot

I did it!

19
New cards

Tie a figure 8 loop

I did it!

20
New cards

Tie a square knot

I did it!

21
New cards

PPE: Ears

Earplugs, headphones

22
New cards

PPE: Lungs

Respirator mask

23
New cards

PPE: Hands

Gloves

24
New cards

PPE: Knees

knee pads

25
New cards

PPE: Feet

Close toed shoes

26
New cards

Ghost light purpose?

Light stage when no one is there

27
New cards

Should the miter saw be used for cross cutting or ripping?

Cross cutting

28
New cards

Bandsaw: How high should the guide be above your material?

1/8th of an inch

29
New cards

Should you always cut directly on your line when using the bandsaw?

No, you can sand it down

30
New cards

What is grit?

How rough the sandpaper is

31
New cards

Why shouldn’t the material be touching the sanding belt when you turn it on?

It could go flying

32
New cards

The ______ is used to loosen and tighten drill bits in the drill press.

Chuck key

33
New cards

Two pros to use steel instead of wood

Stronger, malleable

34
New cards

Two cons to use steel instead of wood

Expensive, heavier

35
New cards

Three ways to connect platforms together

Coffin locks, clamping, bolts and screws

36
New cards

Two materials you could use to frame a platform?

Homasote and steel

37
New cards

Two pros to use Hollywood instead of Broadway

Studier, easier to attach to each other

38
New cards

Two cons to use Hollywood instead of Broadway

Thicker, harder to “soft cover”

39
New cards

What is double purchase line?

2 arbors per lineset: twice the weight on batten, twice the travel

40
New cards

What is a spot line?

Temporary rigging point

41
New cards

Describe motorized rigging system

Fixed travel speed and no counterweight

42
New cards

Arbor heavy means…

More weight on arbor than on batten

43
New cards

Soft covers for platforms

Muslin, velour, scrim

44
New cards

Hard covers for platforms

Lauan, MDF, plywood

45
New cards

Line with dashes

Hidden line

46
New cards

Regular line

Visible line

47
New cards

Plasterlines are for the…

Upstage edge of proscenium arch