Quiz 4 Offset Shart and Worm Gear

To add a tolerance to a dimension you have to: __________.

• Select the menu Insert, Dimension, Tolerance

• Select the dimension and choose the tolerance type in its properties

• Select the Tolerance command and click on the Dimension

• Right-click in the dimension and select Tolerance

Select the dimension and choose the tolerance type in its properties.

To add a dimension to a sketch circle or circular edge you must hold down the __________ key.

• Ctrl key

• Shift key

• Alt key

• Spacebar

Shift key.

You can add a sketch to a cylindrical surface if you are looking at it from the Front view. __________

• True

• False

False.

To create a reference plane you can:

• Select a flat face and set a distance

• Select a linear edge and a vertex/point

• Select three non-collinear vertices/points

• All of the above

All of the above.

The “Convert Entities” command adds which type of geometric relation:

• Equal

• Fix

• Coincident

• On Edge

On Edge.

The option “Flip side to cut”:

• Reverses the direction of the cut extrude

• Removes material outside the sketch

• Sets the end condition to Blind

• None of the above

Reverses the direction of the cut extrude.

The Midplane end condition will make an extrusion:

• Up to the mid plane

• From the mid plane to the Front plane

• From the mid plane to the Right plane

• From the sketch plane equally to both sides

From the sketch plane equally to both sides.

To add a Doubled dimension for a revolved feature we must dimension to:

• The origin

• The end point of a centerline

• The Top plane

• The construction line

The construction line.

The Sketch Mirror command will:

• Mirror the sketch about a centerline

• Create a new sketch

• Mirror the sketch about the origin

• Mirror the sketch about the Front plane

Mirror the sketch about a centerline.

You can define a Chamfer by specifying the:

• Angle and distance

• Distance and Distance

• Bevel’s width

• All of the above

All of the above.