Quiz 4 Offset Shart and Worm Gear

Front:
Question 1:
To add a tolerance to a dimension you have to:

  • Select the menu Insert, Dimension, Tolerance

  • Select the dimension and choose the tolerance type in its properties

  • Select the Tolerance command and click on the Dimension

  • Right-click in the dimension and select Tolerance

Back:
Answer: Select the dimension and choose the tolerance type in its properties

Front:
Question 2:
To add a dimension to a sketch circle or circular edge you must hold down the:

  • Ctrl key

  • Shift key

  • Alt key

  • Spacebar

Back:
Answer: Shift key

Front:
Question 3:
You can add a sketch to a cylindrical surface if you are looking at it from the Front view.

  • True

  • False

Back:
Answer: False

Front:
Question 4:
To create a reference plane you can:

  • Select a flat face and set a distance

  • Select a linear edge and a vertex/point

  • Select three non-collinear vertices/points

  • All of the above

Back:
Answer: All of the above

Front:
Question 5:
The “Convert Entities” command adds which type of geometric relation:

  • Equal

  • Fix

  • Coincident

  • On Edge

Back:
Answer: On Edge

Front:
Question 6:
The option “Flip side to cut”:

  • Reverses the direction of the cut extrude

  • Removes material outside the sketch

  • Sets the end condition to Blind

  • None of the above

Back:
Answer: Reverses the direction of the cut extrude

Front:
Question 7:
The Midplane end condition will make an extrusion:

  • Up to the mid plane

  • From the mid plane to the Front plane

  • From the mid plane to the Right plane

  • From the sketch plane equally to both sides

Back:
Answer: From the sketch plane equally to both sides

Front:
Question 8:
To add a Doubled dimension for a revolved feature we must dimension to:

  • The origin

  • The end point of a centerline

  • The Top plane

  • The construction line

Back:
Answer: The construction line

Front:
Question 9:
The Sketch Mirror command will:

  • Mirror the sketch about a centerline

  • Create a new sketch

  • Mirror the sketch about the origin

  • Mirror the sketch about the Front plane

Back:
Answer: Mirror the sketch about a centerline

Front:
Question 10:
You can define a Chamfer by specifying the:

  • Angle and distance

  • Distance and Distance

  • Bevel’s width

  • All of the above

Back:
Answer: All of the above