1/10
Looks like no tags are added yet.
Name | Mastery | Learn | Test | Matching | Spaced |
---|
No study sessions yet.
how to check brakes before starting
brakes shouldn’t be spongy or slack and the car should not pull to one side
where to find recommended tyre pressures and how to check pressure
in the car’s manual, on the side wall of the tire, or sometimes inside the door-well; to check, use a pressure gauge by removing the valve cap, attaching the gauge, and checking pressure, remembering to put the valve cap back on afterwards
how to ensure head restraint is correctly adjusted
rigid part should be at least as high as the eyes or top of the ears and as close to the back of the head as is comfortable
how to check tyres to ensure sufficient tread depth and general safe condition
no cuts, cracks, or bulges; at least 1.6 mm of tread depth around the middle ¾ of the tyre as well as around the entire outside edge
how to check headlights and tail lights are working
turn on, then walk around vehicle to see
how to know if there is a problem with the anti-lock braking system
the ABS light will come on on the dashboard
how to check indicators are working
turn on indicator, then walk around vehicle
how to check brake lights are working
get someone to walk around the vehicle or look in reflections to see lights while you are operating the brake
how to switch on rear fog lights
spin dial, and warning light should appear to show it is on
how to switch headlight from dipped to main beam, and how to know full/main beam is on
push full beam (on left) lever and
how to check engine has sufficient oil
park car on sufficiently level surface, get rag and remove oil dipstick (yellow ring handle) then wipe clean; re-dip into oil and see where levels are between min-max “hatched” area