1/49
Looks like no tags are added yet.
Name | Mastery | Learn | Test | Matching | Spaced |
---|
No study sessions yet.
Disinfection
A type of surface water purification wherein chlorination or UV disinfection is being conducted.
Pail Flush
Plug
It is used to close an opening in a fitting.
100mm
What is the minimum distance from the wall to the nearest edge of a lavatory?
Water Conservation
Plumbing Principle No. 3 states that the plumbing system shall be designed to use the minimum quantity of water without sacrificing performance. In short, this is known as
PPR
A fusion weld joint is for ____ pipe.
Water Meter
One-piece
A type of water closet as to make which has a combined bowl and flush tank
Elbow
Identify Item No. 15
Union Patente
A three piece pipe fitting used to connect the ends of two-pipes, neither of which can be turned.
False
You are a BS Architecture degree holder; therefore you are technically and legally qualified to practice the master plumbing profession.
Drilled Well
A type of well for deep and large-scale applications.
Pedestal
750mm
What is the minimum distance between the centerline of water closet to the centerline of urinal if these fixtures will be placed side by side?
Vent thru Roof
In plumbing principles no. 12, it is all about Vent Terminals or VTR which means ____.
Bidets
Which of the following plumbing fixtures is solely for the purpose of washing one’s private parts?
Nipple
Chlorinated Polyvinyl Chloride
CPVC means _____.
One-piece
uPVC Pipe
The cheapest and most commonly used plastic pipe for cold water supply lines in the Philippines.
Cap
Identify Item No. 12
Type K
Heaviest and thickest type of copper pipe.
Tee
Identify Item No. 14
Bushing
A pipe fitting which is threaded on both the inside and the outside and used to reduce the size of the pipe opening to receive a pipe or fitting of a different size.
Water Heater
Which of the following is not a plumbing appurtenance?
Water Heater
Water Meter
Water Pump
Water Tank
HDPE
A type of pipe for industrial and high-pressure applications
Angle Valve
Identify Item No. 16
Gate Valve
RA 1378
Plumbing Code of the Philippines is _____.
Flush Tank
A type of water closet which are common for private building such as residences.
Apprentice Plumber
A plumber who is still a beginner at the trade and usually does assistant work.
Hose Bibb
Street Elbow
Threaded Joints
A type of joint that is applicable for combining two or more Galvanized Iron Pipes.
Computer Eng’g
Which of the following degree holder is/are not allowed to take the Master Plumber Board Exam?
Architecture
Mechanical Eng’g
Chemical Eng’g
Computer Eng’g
Urinal
In plumbing principle no. 6 which is all about a plumbing unit, which of the following fixtures are not included in the basic requirements for sanitation and personal hygiene?
100mm
What is the minimum distance between the edges of two lavatories if they are installed side by side.
Aeration
It is a type of surface water purification wherein water is sprayed or cascaded.
Wash-down
A type of water closet (as to design) wherein the least expensive and the trapway is located at the front.
Union
Reducer
It is a pipe coupling with inside threads, having one end with a smaller diameter than the other and used for connecting pipes with different sizes.
Globe Valve
A valve in which the flow of fluid is cut off by means of circular disc that fits against the horizontal valve seat which allows the water flow to be throttled.
Street Elbow
A pipe fitting having a 90 deg bend with an inside thread on one end and an outside thread on the other.
Moldex
Which of the following is not a brand of Water Closet.
Toto
HGC
American Standard
Moldex
Flange
It is a ring shaped plate screwed on the end of a pipe and provided with holes for bolts.
Nipple
Identify Item No. 13
375mm
What is the minimum distance from the wall to the centerline of Water Closet.
Faucet
It is a valve placed at the end of the pipe wherein water can be drawn from or held within the pipe.
Solder Joint
A type of joint to be used when combining two or more copper pipes.
Cross Tee