Cars for the AME - Ninth Edition - CARs Test #4

Manufacturer Servies Bullitens are:

a) Mandatory for all aircraft, with the exception of aircraft in the amateur built and owner maintenance categories

b) Mandatory only if marked mandatory by the aeronautical product manufacturer

c) Mandatory if mandated by the civil aviation authority that controls the type design

d) Mandatory only in the country of origin

c) Mandatory if mandated by the civil aviation authority that controls the type design

Which of the following aircraft must be operated in accordance with an approved maintenance schedule?

a) Part IV and Part VII aircraft

b) Commercial aircraft

c) Private aircraft

d) All of the above

d) All of the above

How many of the following statements concerning maintenance releases are true? 1) All maintenance and elementary work must be certified by a maintenance release. 2) Only an AME can sign a maintenance release. 3) All maintenance must be certified by a maintenance release.

a) One

b) Two

c) Three

d) None

a) One

The following statement An alteration to the type design of an aeronautical product in respect of which a type certificate has been issued that has other than a negligible effect on the weight and center of gravity limits, structural strength, performance, power plant operation, flight characteristics or other qualities affecting its airworthiness or environmental characteristics defines:

a) A major modification

b) A supplemental type certificate

c) A major repair

d) A repair design certificate

a) A major modification

How long must technical records other than the journey log be kept?

a) For one year

b) For as long as the aircraft is registered

c) For three years

d) Until there is a change in legal custody and control of the aircraft

b) For as long as the aircraft is registered

A person performing a major modification or repair must:

a) Use approved or acceptable date

b) Use date approved by an S category AME

c) Use approved or specified data

d) Use a procedure and date approved pursuant to CAR 625

c) Use approved or specified data

In a CARs number, the digits immediately following the decimal point or period denote:

a) The sub-section

b) The section

c) The sub-part

d) The paragraph

b) The section

Except where equipped with water activated batteries, ELT's must be checked in accordance with Appendix G of AWM 571:

a) Every 24 months

b) In accordance with the manufacturers recommendations

c) On the first five minutes of every hour

d) Every 12 months

d) Every 12 months

A person holding a Shop Certification Authority (SCA) is:

a) Authorized in the MPM of an AMO to certify maintenance on aircraft parts

b) Authorized by the Minister to certify one particular task

c) Equivalent privileges to an AME

d) Authorized in the MPM of an AMO to certify maintenance on an aircraft

a) Authorized in the MPM of an AMO to certify maintenance on aircraft parts

Once an MEL is approved for an operator's aircraft:

a) The operator must operate the aircraft under the conditions specified in the MEL

b) Conditions of the MEL are optional when they conflict with the operator's approved maintenance schedule

c) The MEL is transferrable to other operators of the same type of aircraft, provided they operate under the same conditions

d) The MEL will specify tolerances on airworthiness limitations

a) The operator must operate the aircraft under the conditions specified in the MEL

General Provisions are found in:

a) AWM chapter 571

b) CAR Part III

c) AWM chapter 507

d) CAR part I

d) CAR part I

What type of position light is required on the port (left) side of an aircraft?

a) Steady green

b) Flashing green

c) Flashing red

d) Steady red

d) Steady red

During the annual inspection of a private aircraft, an AME finds the engine to be faulty and beyond repair. After consulting the owner, the AME replaces the engine with an overhauled unit, and signs a maintenance release to that effect. Has the maintenance for the engine change been properly certified?

a) Yes, providing a dual inspection for the engine installation has been carried out

b) No - the maintenance must be carried out by an AMO rated for that type of specialized maintenance

c) Yes - providing a major modification or repair report is submitted to the Minister

d) No - none of the above are true

a) Yes, providing a dual inspection for the engine installation has been carried out

A maintenance release is required for:

a) All maintenance carried our on aircraft and aeronautical products, with the exception of maintenance performed on amateur built and owner-maintained aircraft

b) All maintenance on aircraft and aeronautical products, including elementary work carried out on Part IV and Part VII aircraft

c) All Maintenance carried out on aircraft or aeronautical products, with the exception of maintenance performed on ultra-light aircraft and hang gliders

d) none of the above

c) All Maintenance carried out on aircraft or aeronautical products, with the exception of maintenance performed on ultra-light aircraft and hang gliders

Where are the detailed task listings for elementary work found?

a) Appendix A, CAR 625

b) AWM Chapter 571

c) Appendix B, CAR 625

d) AWM Chapter 566

a) Appendix A, CAR 625

The aviation regulations mandated by the Civil Aviation Authority of the United States of America are called:

a) The JARs

b) The CAAs

c) The PMAs

d) The FARs

d) The FARs

When is a dual or independent check required?

a) After any work that disturbs engine or flight controls

b) After any work that is subject to a maintenance release

c) After and maintenance performed on an aeronautical product

d) Before and test flight carried out pursuant to a conditional maintenance release

a) After any work that disturbs engine or flight controls

When an aircraft is flying directly towards you, which of its lights would be visible?

a) Steady red on your right, steady green on your left

b) Steady red on your left, steady green on your right, steady white in the center

c) Steady red on your left, steady green on your right, flashing anti-collision light

d) Steady red on your right, steady green on your left, flashing anti-collision light

d) Steady red on your right, steady green on your left, flashing anti-collision light

Prior to license issue, the applicant shall have attained the age of __ years:

a) The age of majority relative to the applicant's citizenship

b) 21

c) No age specification exists

d) 18

b) 21

An approved document authorizing the operation of an aircraft with inoperative equipment under certain conditions is known as:

a) Minimum equipment list

b) Deferred defect procedure

c) Required equipment list

d) Approved equipment list

a) Minimum equipment list

A progressive maintenance program for small piston powered private aircraft:

a) Must be accomplished every 100 hours of air time

b) Only commercial aircraft are eligible for progressive inspections

c) Allows the owner to defer inspections until such a time as is practicable, but at least, before 100 hours accumulated air time

d) Must provide a complete inspection to at least the same extent of Appendix B in CAR 625 within each 12 month period

a) Must be accomplished every 100 hours of air time

How often must altimeters and pitot-static systems be checked?

a) Every 24 months

b) Annually

c) Every 6 months

d) None of the above

a) Every 24 months

Persons performing elementary work for a commercial air service must:

a) Have done it once under the direct supervision of an AME

b) Be the pilot-in-command or other person qualified under the MCM

c) Have completed a Transport Canada CARs exam

d) Be trained in accordance with the standards of CAR 403

a) Have done it once under the direct supervision of an AME

Hard time intervals for aircraft equipment maintenance are found in:

a) Appendix B, AWM 571

b) Appendix C, CAR 605

c) Appendix G, CAR 571

d) Appendix C, CAR 625

d) Appendix C, CAR 625

A "small aeroplane" has a maximum take-off weight of _____ or less?

a) 2730 kg

b) 5700 kg

c) 12,566 kg

d) 15000 kg

b) 5700 kg

If the second digit in a CARs number is a 4, this denotes:

a) A regulation

b) Advisory material

c) A standard

d) AWM material

b) Advisory material

If a reportable SDR of the same nature occurs more than once on the same or similar aeronautical product:

a) It need not be reported

b) It must be reported

c) It must be reported on an interim report

d) Recurring defects do not require further reporting

b) It must be reported

Aircraft operating under CAR Part IV are:

a) Commercial aircraft

b) State aircraft

c) Operated by Transport Canada

d) Flight training aircraft

d) Flight training aircraft

The Regulations governing SDRs are found in:

a) CAR Part V, subpart 93

b) CAR Part V, subpart 71

c) CAR 5291

d) CAR Part V, Subpart 21

d) CAR Part V, Subpart 21

ADs are mandatory only:

a) When issued by Transport Canada

b) When issued against Canadian aircraft

c) When marked Mandatory

d) When issued by Transport Canada or a foreign Civil Aviation Authority with jurisdiction over the initial type design.

d) When issued by Transport Canada or a foreign Civil Aviation Authority with jurisdiction over the initial type design.

The regulations governing ADs are found in:

a) CAR Part V, Subpart 21

b) AWM Chapter 501

c) AWM Chapter 593

d) CAR Part V, subpart 91

a) CAR Part V, Subpart 21

Which of the following is true?

a) No person other than the holder of an AME license has the authority to sign a maintenance release

b) No person other than the holder of an AME license authorized through the MPM of an AMO has the authority to sign a maintenance release for specialized maintenance

c) After a successful test flight, the AME who signed the conditional maintenance release must certify the test flight results

d) None of the above

d) None of the above

An aeroplane certified in the normal category is flown under the authority of:

a) The type certificate issued pursuant to CAR 511

b) the AME who last certified maintenance on the aircraft

c) The aircraft's certificate of airworthiness, provided the aircraft continues to meet conditions of issue

d) The Minister of Transport or a delegate

c) The aircraft's certificate of airworthiness, provided the aircraft continues to meet conditions of issue

How often must ELTs powered by water-activated batteries be re-certified?

a) Annually

b) According to the manufacturer's recommendations

c) After immersion in water

d) Every five years

d) Every five years

The total time from the moment the aircraft first moves under its own power for the purpose of taking off until the moment it comes to rest at the end of a flight is known as:

a) Take off and landing

b) Air time

c) Flight time

d) A flight cycle

c) Flight time

AME licence ratings are as follows:

a) M1, M2, E, S, Balloons

b) M, E, S, P

c) M1, M2, E, S, P

d) E, M, P, S, B

a) M1, M2, E, S, Balloons

Which of the following is true?

a) Any normal category aircraft is an M1 aircraft

b) Holders of a combined M1/M2 rating will not be issued E and S ratings

c) The holder of an M2 AME rating may certify maintenance on M2 and M1 aircraft

d) None of the above

b) Holders of a combined M1/M2 rating will not be issued E and S ratings

Form One is:

a) An authorized release certificate

b) A conformity certificate

c) AN SDR form

d) An application for a C of A

a) An authorized release certificate

Where are the requirements for maintenance releases found?

a) CAR 507

b) CAR 571

c) CAR 625

d) AWM 507

b) CAR 571

Where would the regulations and additional information on compliance with ADs be found?

a) CAR 593, AWM 593

b) CAR 521, Appendix H of CAR 625

c) CAR 591, AWM 591

d) CAR 605, CAR 625, Appendix H

b) CAR 521, Appendix H of CAR 625

A maintenance release shall include the following or a similarly worded statement:

a) I hereby certify that the aircraft is in a fit and safe state for flight

b) I hereby certify that the above work has been performed to the applicable standards of airworthiness and the aircraft is airworthy

c) The described maintenance has been performed according to the applicable standards and the aircraft is in conformance with its type design

d) The described maintenance has been performed in accordance with the applicable airworthiness requirements

d) The described maintenance has been performed in accordance with the applicable airworthiness requirements

The person Responsible for Maintenance Control System of a Commercial Operator:

a) Shall have a least six years of experience in the maintenance of the type of aircraft operated

b) Is authorized to remove an aircraft from operation if it is unsafe

c) Shall be the holder of an appropriately rated and current AME license

d) All of the above

b) Is authorized to remove an aircraft from operation if it is unsafe

Elementary work means:

a) Those tasks for which a maintenance release may be signed by the pilot in command

b) Those tasks that are listed as elementary work in the Aircraft Equipment and Maintenance Standards, CAR 625, Appendix A

c) Those tasks that are listed in schedule II of CAR 571, Aircraft Maintenance requirements

d) Those tasks that are not subject to the requirements of CAR 571 or CAR 605

b) Those tasks that are listed as elementary work in the Aircraft Equipment and Maintenance Standards, CAR 625, Appendix A

Upon selling a Canadian registered Aircraft to a person not qualified to be the owner of a Canadian registered aircraft, the owner must:

a) Remove the marks

b) Notify the Minister within 30 days

c) Remove the marks when the aircraft has reached its final destination

d) Surrender all technical records to the Minister

a) Remove the marks

Where are the standards for delegation of authority found?

a) The ANOs

b) CARs 501

c) AWM Chapter 505

d) The aeronautics code

c) AWM Chapter 505

The first digit in a CARs number represents:

a) A standard

b) The part

c) The subpart

d) A regulation

b) The part

If a Canadian aircraft requires the performance of maintenance in a foreign country, who may certify the maintenance?

a) A person who is authorized to sign under the laws of a state that is party to an agreement or technical arrangement with Canada that provides for certification, or the person holds equivalent qualifications

b) Only maintenance on privately registered Canadian aircraft may be certified in a foreign country

c) The maintenance may only be certified through the approved foreign equivalent of an AMO and by persons authorized to do so under the policies of the foreign equivalent

d) All maintenance on Canadian aircraft must be certified by an appropriately rated AME

a) A person who is authorized to sign under the laws of a state that is party to an agreement or technical arrangement with Canada that provides for certification, or the person holds equivalent qualifications

Appendix D of CAR 625 is:

a) The approved maintenance schedule for small, piston powered aircraft

b) The approved maintenance schedule for balloons

c) Only applicable to large aircraft operated pursuant to CAR Part IV and CAR Part VII

d) Operator's approved maintenance schedules

d) Operator's approved maintenance schedules

No person shall install a part on an aircraft unless:

a) It is inspected and its accompanying documentation verified

b) It has an AI-99 tag

c) It is an authorized PMA part

d) The person installing it is a properly rated AME

a) It is inspected and its accompanying documentation verified

Any person who has been given notice by the Minister of Transport under certain sections of the Act mat apply to the ___ for a review of the Minister's decision.

a) Civil Aviation Tribunal

b) Transport Appeal Tribunal of Canada

c) Airworthiness Appeal Board

d) Transport Canada Appeal Board

b) Transport Appeal Tribunal of Canada