sewing machine ii

Reverse button

Reverse button

________- allows the machine to perform backstitch.

Fabric

________ puckering- tension too tight or blunt needle.

Thread

________ breaking- tension too tight or needle is incorrectly inserted.

Presser foot

________- holds fabric in place while stitching.

Tension

________ disc- controls ________ of the thread.

stitches

Missing ________- needle is bent or material is being pulled.

Bobbin winder

________- holds bobbin while putting thread on it.

Hand wheel

________, allows the worker to lift and lower the needle by hand.

upper thread

Take up lever- allow ________ to move and down.

Stop motion

________ screw- when loosened it stops movement of the needle.

Thread guide directs

________ thread from the spool pin to the needle.

Needle

________ not moving- stop motion screw is not set for motion.

Presser foot

________ lever- raises and lowers the ________.

bobbin winder

holds bobbin while putting thread on it

feed dog

moves fabric along under presser foot

needle clamp

holds needle in place

presser foot

holds fabric in place while stitching

presser foot lever

raises and lowers the presser foot

reverse button

allows the machine to perform backstitch

spool pin

holds the top thread

stitch pattern control

allows the selection of stitches

stop motion screw

when loosened it stops movement of the needle

take up lever

allow upper thread to move and down

tension disc

controls tension of the thread

stitches not interlocking

needle inserted backwards

fabric not moving when stitching

fabric is too thick or beginning too close to edge

thread breaking

tension too tight or needle is incorrectly inserted

missing stitches

needle is bent or material is being pulled

loops on under side

loose top thread

loops on top side

loose bobbin thread or loose tension

fabric puckering

tension too tight or blunt needle

needle not moving

stop motion screw is not set for motion

needle breaking

loose presser foot or loose needle