Schneider Electric Belt Conveyor Schematic Vocabulary

Flashcards defining specific component designations, instructions, and ratings from the Schneider Electric India schematic drawings for the Belt Conveyor DOL/HDOL starter.

415V, 3PH, 3WIRE, 50HZ

The main AC power supply line rating specified for the belt conveyor starter circuit.

118V AC FROM CONTROL BUS-III

The designated control circuit voltage supply source powering the starter control schematic.

DOL/HDOL (45 TO 75KW) (DB)

The starter configuration type standing for Direct On Line / Heavy Direct On Line for motors rated between $45\,\text{kW}$ and $75\,\text{kW}$.

Remote Ammeter Installation Instruction

The schematic instruction specifying: 'REMOVE SHORTING LINK WHILE CONNECTING REMOTE AMMETER' across terminals C71 and C72.

Shorting Stud Operation Instruction

The instruction specifying: 'SHORTING STUD WILL BE PROVIDED. TO BE LOOSENED FOR DCS OPERATION & SHORT FOR LOCAL OPERATION'.

-D8-TB

Designation for terminal blocks situated inside the module (TB'S INSIDE MODULE).

-D8-SLC

Designation for the sliding contact module connections (SLIDING CONTACT).

-S18

The stayput STOP button switch located at the MCC (STOP MCC STAYPUT).

ACC LAKHERI EXPANSION

The project name specified for customer M/S ACC LTD under drawing LTX.NO. 1121.

ZSS SUPPLY

The power supply circuit feed designated for the Zero Speed Switch.