Robotics 10th grade safety

Robotics

Protection

Always wear eye _.

Permission

You must have the instructor's _ before you use any of the equipment.

Safely

Use the power Equipment only if you understand how to use it correctly and _.

Instructor

The _ must be present in the shop whenever you use the power equipment.

Attention

Use the power tools only when you can give your full _ to what you are doing.

Electricity

When you work with _, you must make sure your hands and the floor you are standing on are dry.

Stopped

When you approach a machine to use it, make sure the person who used it before you turned it off and it is completely _.

Sharp

The cutting tool in the machine must be _ and in good condition.

Cutting Tool

Be sure the _ is installed properly and adjusted correctly for what you want to do.

Safety Guards

Check to see that the _ are in place and working properly.

Remove

Do not _ any of the safety guards unless you have the instructor's permission.

Sound

If a machine doesn't work properly, or if it doesn't _ right, turn it off and tell the instructor.

Designed

Power tools should be used only for what they are _ to do.

Adjustments

Get permission before you make any major _ or changes on the equipment.

Disconnect

_ the power to the machine before you make any major changes or adjustments.

Sign

If you disconnect a machine at the circuit breaker panel, put up a _ that warns others not to reconnect it.

Completely

The machine must be turned off and _ stopped before any minor adjustments are made.

Lighted

Work in a well _ area so you can see clearly.

Balanced

Keep yourself _. Don't over-reach or lean on a machine.

Defects

The material must be clean and free of _, hardware, and finishes.

Full

The cut must not be started until the machine is running at _ speed.

Force

Use an even, steady pressure to make the cut. Don't _ it or over-load the machine.

Tail-Off

If the material is large or heavy, get help. Ask someone to _ for you.

Double-Check

Ask the instructor to _ and special set-ups or attachments before you use them.

Distract

Don't let anyone _ you while you operate the equipment.

Brush

Use a piece of scrap wood, a push stick, or a _ to clear away scraps or dust. Don't use your hands.

Danger Zones

Stay clear of the _ when someone is operating a machine.

Running

Never leave a machine while it is still _. The machine must be stopped before you leave.

Attachments

When you have finished, remove any _ or special set-ups you may have used.

Clean

_ the equipment and the area around it when you are finished with the work.