1/98
Looks like no tags are added yet.
Name | Mastery | Learn | Test | Matching | Spaced |
---|
No study sessions yet.
Naturally-occurring mineral
Asbestos fibers are best described as
Chrysotile
The most common variety of asbestos used in the United States is
Crocidolite
The type of asbestos often referred to as "blue" asbestos is
Inhalation
The main route of entry into the human body for asbestos fibers is
Skin cancer
All of the following are asbestos-related diseases except
A cancer in the lung tissue
Lung cancer is best described as
90
The incidence of lung cancer in occupationally exposed workers who also smoke is ___ times greater than the non-exposed non-smoking public
An asbestos-specific disease in which there is a scarring of the lungs at the alveoli area that inhibits the transfer of oxygen into the blood
Asbestosis is best described as
A cancer of the tissue surrounding the lungs and intestines
Mesothelioma is best described as
1890-1920
Asbestos was first used commercially in the United States around
TSI
The first major use of asbestos was
Latency period
The time period from which an individual is exposed to asbestos and then diagnosed with a disease is referred to as
Identify and safely manage asbestos in schools
The primary objective of AHERA is
To control the generation and disposal of asbestos waste
The primary objective of the NESHAP is
To require employers to protect employees who perform asbestos work
The primary objective of the OSHA asbestos regulations is
0.1 f/cc
OSHA's current Permissible Exposure Limit for asbestos as a Time Weighted Average is
9 samples
According to EPA, what is the minimum number of samples that should be collected of friable surfacing materials?
Randomly with a minimum of 3 samples collected
According to AHERA, how must TSI be sampled?
Housing, public and commercial buildings, and schools
In what types of buildings is the AHERA certified Asbestos Building Inspector required?
Any material with >1% asbestos
Asbestos Containing Material is defined as
NVLAP
The laboratory accreditation required by NIST for analysis of bulk samples and for TEM clearance samples is
Identifying all ACBM, and assessing all friable and TSI ACBM
What two functions is the AHERA Asbestos Building Inspector responsible for performing?
The current condition of all friable and TSI ACBM and its potential for disturbance
What information does the inspector's "Written" or "Physical Assessment" provide?
Architectural and Structural
Which of the following drawings could the Asbestos Building Inspector use to obtain information on the presence and potential quantity of fireproofing in the building?
Friable surfacing
The 3, 5, 7 rule applies to which suspect material(s)?
1
When sampling a patched area of a boiler insulation which measures 2 feet by 1 feet, how many samples must be collected?
Management Planner and Project Designer
Who is responsible for designating Functional Spaces in schools?
Fireproofing, acoustical "popcorn" ceiling, and wall texture
Which of the following would be considered "Surfacing" according to AHERA?
Any construction material containing more than 1/10th of 1% asbestos by weight
Cal OSHA defines an Asbestos Containing Construction Material (ACCM) as
Damaged Surfacing, Assessment Category 2
A homogeneous area of fireproofing with 10% localized damage would be classified into which of the following assessment categories?
Through the materials potential for disturbance from contact, air erosion and vibration
How does the Asbestos Building Inspector determine the potential for disturbance?
A pipe chase, the plenum above a drop ceiling, and a classroom
Which of the following would be considered a Functional Space?
By touch
How must the AHERA Building Inspector determine friability?
TSI, Surfacing, and Miscellaneous
The three (3) classes of building materials according to AHERA are
1 per building or 1 per 20 samples collected, whichever is larger
How many quality assurance samples does EPA recommend?
Bulk sampling is not a Class of Work according to OSHA
According to OSHA, bulk sampling operations are which Class of Work?
9x9 floor tile, roofing material, vibration boot on air handling system
Which of the following would not be considered "suspect" ACBM according to AHERA?
PLM
Asbestos bulk samples are usually analyzed utilizing which microscopy method?
5%
The limit of detection for X-Ray Diffraction (XRD) is
When sampling TSI and surfacing and where the Inspector has not established an NEA
When is an Asbestos Building Inspector never exempted from the requirement to wear a respirator?
Significantly Damaged Surfacing
According to AHERA, which of the following is an appropriate "Physical or Written Assessment" category?
Placing a bollard in the ground immediately adjacent to a boiler that is coated with TSI so that people and equipment can not bump into it
Which of the following would be considered a preventative measure?
An action taken to reduce the potential of an ACBM likelihood of becoming damaged or significantly damaged
How would a preventative measure be best defined?
Removal, encapsulation or enclosure, and repair
Which of the following would be considered a response action?
The one that protects human health and the environment in the least burdensome manner
The most appropriate response action as defined by AHERA is?
Immediately isolate the functional space and remove, enclose, or encapsulate the material
What is the required response to significantly damaged friable surfacing ACBM?
Whenever a school building contains friable or assumed ACBM
When is a school required to have an Operations & Maintenance Plan?
Notifications to building user groups, response action work, and periodic cleaning records
Records that must be kept as part of the management plan
Prioritize response actions
A "Hazard Assessment" is developed by the Management Planner to
Schedule both the beginning and conclusion of each response action
For each Response Action, the Management Planner must
Combining asbestos removal with other scheduled renovation projects
The Management Planner can achieve the "Least Burdensome" mandate by
Immediately adjacent to any friable and non friable ACBM in routine maintenance areas
AHERA requires that warning labels be placed
A schedule for periodic cleaning in areas that contain ACBM, training for custodial and maintenance employees, and records of periodic surveillance
Components of an O&M program include
Acoustical ceiling texture in the band room
According to AHERA, which of the following would pose the greatest hazard to building occupants
The falling or dislodging more than 3 square feet or 3 linear feet of friable ACBM
According to AHERA, which of the following would be considered a major fiber release episode?
Maintenance level work that involves the disturbance of ACM in which the waste generated does not exceed that which can be contained in a glove bag or waste bag no greater than 60"x60"
OSHA defines Class III work as
TSI and surfacing in buildings built through 1980
According to OSHA, which of the following would be considered PACM
General Liability of an Occurrence Form
The type of insurance usually required by the owner for the asbestos abatement contractor is
Before and at the end of each job
Calibration of air pumps is required when?
Pipe insulation with torn jacketing in a classroom
Which of the following uses of TSI would pose the greatest risk of building occupants?
Guarantees that the owner will be able to have the project completed if the abatement contractor goes bankrupt
The bonding normally requested for an abatement contractor is a Payment and Performance Bond. The purpose of the bond is to
Where an NEA has not been established and whenever TSI and surfacing is being removed and/or disturbed
Respiratory protection is required when
19.5-23.5%
Oxygen content for Grade D air must be
Mini enclosure and Negative Pressure Enclosure (NPE)
According to OSHA, and example of an engineering control that would protect employees outside the work area from asbestos exposure would be
Liquidated Damages
Money assessed against a contractor who failed to complete a project according to the schedule is called
Electrical, falls, heat
Which of the following hazards could be encountered during an asbestos abatement project?
For response action work that is less than or equal to 160 square feet or less than or equal to 260 linear feet
When is clearance by PCM allowable according to AHERA?
Isolation of the buildings HVAC system in the work area
Which of the following is the most important consideration when planning an asbestos abatement project?
Textured wall systems
Which of the following asbestos-containing materials would be required to be disposed of at a NESHAP-approved waste disposal site?
Administrative controls, engineering controls, respirators
The correct flow of controls on the work site in order to prevent employee exposure are
1 to 4
An extension ladder must have a lean ratio of
The General Contractor
On a multi-employer worksite, who, according to OSHA, is deemed to exercise general supervisory authority
99.97%
A HEPA filter must have what minimum level of efficiency?
Reportable Quantity, 1 pound
The "RQ" label on asbestos waste containers transported on public right-of-way stands for
Personal Air Monitoring Data and Medical Surveillance Data
Records required by OSHA to be kept by the employer for 30 years include
Equipment room, shower, and clean room
The OSHA required elements of a Class I decontamination unit are
9
A two-story building which has a basement, a boiler room, one pipe chase, two restrooms on each floor, a lobby and an office area has how many functional spaces?
Building materials that are similar in appearance, color, texture and application date
A homogeneous area can be best described as
The employees
Results of employee exposure monitoring are required to be reported to
Asbestos waste disposal
Vitrification is a process used for
A negative pressure fit check
Covering the inhalation valves of a respirator while gently breathing in can be best described as
Isoamyl acetate, Saccharin, Bitrex
Qualitative fit tests can be performed using
Worn under the coveralls hood
When wearing a respirator and protective clothing, the straps to the respirator should be
Lock down
Sealing a recently abated surface with a liquid is referred to as
The chiller unit, ducting system, and condenser coils
Components of the HVAC system include
100 square feet or more of ACM
A contractor must be registered with Cal OSHA if they will disturb
300 feet
The maximum length of hose that is allowable Grade D air supplied respirator is
A permit is required to enter, has a single opening and is not normally accessed, and has a potential hazardous atmosphere or has an oxygen deficiency
Which of the following is most true concerning confined spaces?
13
AHERA requires that _____ samples be collected when performing TEM final clearance
Artificially disturbing the air within the work area
Aggressive air clearance can be best described as
1000
What is the current protection factor of the PAPR respirator?
Statutory Law
Failure to comply with an existing Federal, State, or local regulation is a violation of
Requires that if a building owner knows about asbestos in his/her building, then all tenants must be notified
In California, what doest the Connelly Act require of building owners?
18-24 inches
When poly is used on the walls and floors of an abatement work area, EPA recommends that floors are how far up walls?
Above 6 feet
Toe boards are required to be installed on scaffolding when the scaffolding is
Connected to a GFCI power source, double insulated, and grounded
Electrical equipment in the work area must be
Payment and Performance Bond
Which type of bonding would protect the owner if an abatement contractor went bankrupt during an asbestos abatement project?
Oxygen deficiency, combustible gasses and vapors, toxic chemicals
Confined spaces that require a permit require testing for hazardous atmospheres. What is the correct order for testing of hazardous atmospheres?
Heat stress
Clammy skin, profuse sweating, and dizziness are indications of?