PDF Topic 5

DRAG DROP - A company uses Dynamics 365 Supply Chain Management. You need to implement inventory cycle counting. Which counting methods should you use?

To answer, drag the appropriate counting methods to the correct requirements. Each counting method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

Counting methods:

• System directed cycle count

• Cycle count grouping

• User-directed cycle count

• Spot count

Requirement:

• Guide the user through a count and assign a cycle counting work ID to the user

• Allow the user to determine which location, work pool, or zone to count

• Allow the user to determine which location to count and when to count the location

• Perform an on-demand count

Guide the user through a count and assign a cycle counting work ID to the user

• System directed cycle count

Allow the user to determine which location, work pool, or zone to count

• Cycle count grouping

Allow the user to determine which location to count and when to count the location

• User-directed cycle count

Perform an on-demand count

• Spot count

You are the warehouse manager at a distribution center. In the warehouse, items must be moved to a staging location before moving to the baydoor location for shipping. You need to set up a work template that accomplishes this pick/put scenario. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Create one work class ID with valid location types of staging and baydoor. Assign these to the work template details.

B. Create two work templates: one is a pick/put from inventory to staging and the other is from staging to baydoor.

C. Create a sales order work template with two pick/put pairs: one to staging and the second to baydoor.

D. Create two work class IDs: one with valid put location types of staging and the other of baydoor. Assign these to the appropriate put work types on the work template.

B and D

You are the warehouse manager at a large distribution company and are responsible for all outbound processing. You decide to implement cluster picking functionality to more efficiently aid in picking. When warehouse workers log in to the mobile device to process a cluster pick, the work items are not assigned to positions as expected. You need to validate the cluster picking setup.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Review the Sales order Work template.

B. Validate the Cluster profile's positions and sorting setup.

C. Validate whether there is a Cluster profile selected on the Mobile device menu item.

D. Review the Location directive for sales picking.

B and C

A company plans to use the warehouse mobile app for cluster picking. The system must break the cluster when stocking items. You need to configure the system. What should you do?

A. On the Mobile device menu items form, select an option for the Directed by field.

B. On the Cluster profile form, add a value to the Sequence Put-away field.

C. On the Cluster profile form, add a value to the Break cluster at field.

D. On the Mobile device menu items form, add a value for the Work type Put-away field.

C

HOTSPOT - A company needs to stock inventory in their warehouse. Inbound purchase order materials may need to be placed into more than one location in the warehouse. You need to configure placement for inventory in the warehouse. How should you set up location directives?

To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Sequential setup of new location directive:

• Location Directive, Lines, and Location Directive Actions

• Location Directive Actions, Lines, and Location Directive

• Lines, Location Directive, and Location Directive Actions

• Location Directive Actions, Location Directive, and Lines

Location directive action strategy:

• Match packing, Consolidate, and Empty location with no incoming work

• FEFO batch reservation, None, and Match packing

• Empty location with no incoming work, None, and Consolidate

Sequential setup of new location directive:

• Location Directive, Lines, and Location Directive Actions

Location directive action strategy:

• Empty location with no incoming work, None, and Consolidate

DRAG DROP - A company uses the Dynamics 365 Supply Chain Management Warehouse management module. The company requires production waves to be processed in batch. You need to configure wave processing. In which order should you perform the actions?

To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Actions:

• Set up a warehouse

• Set up the Production control parameter Production line release

• Set up Wave templates

• Set up Warehouse management parameters

• Set up a warehouse

• Set up Wave templates

• Set up Warehouse management parameters

• Set up the Production control parameter Production line release

DRAG DROP - You need to implement location directives in Dynamics 365 Supply Chain Management. Which objects should you use? To answer, drag the appropriate objects to the correct permissions. Each object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

Objects:

• Work order type

• Work type

• Directive code

• Sequence number

Requirement:

• Specify the inventory transaction for which a directive is used

• Specify whether the action will be a pick or put

• Specify which directive is linked to a work template

Specify the inventory transaction for which a directive is used

• Work order type

Specify whether the action will be a pick or put

• Work type

Specify which directive is linked to a work template

• Directive code

DRAG DROP - A company plans to use warehouse management and dock appointment scheduling in Dynamics 365 Supply Chain Management. You need to configure the system. Which configuration options should you use?

To answer, drag the appropriate configuration options to the correct requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

Configuration options:

• location profile ID

• appointment rule

• appointment scheduling

Requirement:

• Use license plate tracking

• Allow mixed items

• Drivers must check in before delivering goods

• Specify the planned start and end dates of dock activity

Use license plate tracking

• location profile ID

Allow mixed items

• location profile ID

Drivers must check in before delivering goods

• appointment scheduling

Specify the planned start and end dates of dock activity

• appointment rule

HOTSPOT - A company creates loads to ship sales orders. Loads must be shipped by using the lowest freight rates possible. You need to use the load planning workbench to create a load for sales order shipments. Which configuration options should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Enable a sales order for Warehouse and Transportation Management:

• Warehouse and Item only

• Site and Warehouse only

• Site, Warehouse, Location, and Item

• Warehouse, Location, and Item only

Create a load and assign rate:

• New Load, Select Load Template ID, Rate shop, Assign rate

• New shipment, New load, Rate shop, Assign rate

• New Load, Generate Bill of lading, Rate shop, Assign rate

• New Load, Select Work Template ID, Rate shop, Assign Rate

Enable a sales order for Warehouse and Transportation Management:

• Site and Warehouse only

Create a load and assign rate:

• New Load, Select Load Template ID, Rate shop, Assign rate

You are the logistics manager at a distribution company. Your primary carrier service provides rates for transportation between New York City and Colorado. These rates are a at rate depending on the city or general area of pickup as follows:

✑ New York City = $500

✑ Colorado = $450

You need to set up Transportation Management to calculate the rate from New York City to Colorado. What should you do?

A. Use a Point-to-Point engine based on weight and miles. Assign rates from New York City as the starting location and Colorado as the ending location and break the rates out based on the weight of the package.

B. Use a mileage-based rate engine to configure a rate master that calculates the rate based on the miles from New York City to Colorado.

C. Create hubs for both locations. Add a route plan from New York City to Colorado and assign the two charges as spot rates.

D. Set up zones in the Zone Master for New York City and Colorado. Assign rates to each zone in the Zone Master by starting and ending location.

A

HOTSPOT - A company must set up replenishment of inventory using vendor-owned consignment inventory. You need to create the replenishment order. How should you complete the replenishment order? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Vendor assignment:

• Approved vendor, Registered inventory owner

• Approved vendor, Primary stocking vendor

• Intercompany vendor assignment, Primary stocking vendor

• Intercompany vendor assignment, Intercompany customer assignment

Order type:

• Consignment replenishment

• Transfer

• Production

• Adjustment

Dimensions:

• Owner

• Location

• Batch

• License plate

Vendor assignment:

• Approved vendor, Registered inventory owner

Order type:

• Consignment replenishment

Dimensions:

• Owner

A warehouse picks and ships product. The warehouse completes work immediately upon automatic release to the warehouse. You need to configure waves to allow for automatic work creation. What should you do?

A. Select the wave template and attribute to automatically process.

B. Release to warehouse and process the work.

C. Automate wave creation and process the wave at release to warehouse.

D. Automate wave creation and automatically process work.

C

DRAG DROP - A company plans to implement Dynamics 365 Supply Chain Management mobile device connectivity. You need to perform a spot cycle count on the mobile device. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Actions:

• Create inventory journals

• Register and confirm the item number and counted item quantity

• Create a cycle count supervisor

• Select the menu item to process spot cycle counting work

• Register the location to perform spot cycle counting

• Set up cycle counting work

1) Select the menu item to process spot cycle counting work

2) Register the location to perform spot cycle counting

3) Register and confirm the item number and counted item quantity

DRAG DROP - A company uses Dynamics 365 Supply Chain Management with basic warehouse processes. Mobile devices are not used in the two warehouses. Warehouse items that have an A classification are counted weekly through automatic cycle count journals that are created per warehouse. Items that are in both warehouses appear only in one journal for counting. Counts are inaccurate because picking is posted against items that are being counted. You need to resolve the cycle count issues.

To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

Configurations:

• Cycle count thresholds

• Inventory blocking

• Lock items during count

• Warehouse item setup

Requirement:

• Items must appear on both journals

• Transactions must be stopped

Items must appear on both journals

• Warehouse item setup

Transactions must be stopped

• Lock items during count

You are implementing warehousing in Dynamics 365 Supply Chain Management. You need to configure and approve one warehouse that can be used to create additional warehouses. What should you use?

A. inventory and warehouse management parameter setup

B. warehouse management parameter setup only

C. warehouse work template

D. warehouse configuration template

D

DRAG DROP - A client uses Dynamics 365 Supply Chain Management. You need to configure automatic freight reconciliation. Which configuration options should you use? To answer, drag the appropriate configuration options to the correct requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

Configuration options:

• Freight bill type

• Freight bill type assignment

• Audit master

Requirement:

• Specify how freight bills and carrier invoices should be matched

• Map a freight bill to a carrier

• Define tolerance limits and how to handle discrepancies

Specify how freight bills and carrier invoices should be matched

• Freight bill type

Map a freight bill to a carrier

• Freight bill type assignment

Define tolerance limits and how to handle discrepancies

• Audit master

A company has several warehouse locations. The company acquires a new warehouse. You must design a new warehouse process workflow for the new warehouse. You need to configure the workflow. Which three options should you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. work pools

B. cluster picking

C. outbound wave processing

D. work templates

E. wave templates

A, D and E

DRAG DROP - A company uses Dynamics 365 Supply Chain Management. The company plans to streamline their receiving process for shipments that arrive daily. You need to set up inbound shipment processing. In which order should you perform the actions?

To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select. Select and Place:

Actions:

• Assign a rate and route

• Consolidate multiple shipments that can be consolidated and then confirm load

• Create a load for shipping

• Plan appointments for the load

• Register a driver check-in and check-out for appointment

• Create a load for shipping

• Consolidate multiple shipments that can be consolidated and then confirm load

• Assign a rate and route

• Plan appointments for the load

• Register a driver check-in and check-out for appointment

A company plans to implement Dynamics 365 Supply Chain Management shipping manifests. The company wants to use a multiple-level manifest process. You need to ensure that the system is configured for multiple-level manifest processing. What should you validate?

A. All containers are manifested after the container group is manifested.

B. All containers are manifested before the container group is manifested.

C. The allow split picks configuration is enabled.

D. All container types are set up with all four attributes.

B

A company uses the warehouse mobile app for Dynamics 365 Supply Chain Management. You must create a menu item for reprinting license plate labels. Reprinting a license plate label must not create warehouse work. You need to configure the warehouse mobile app to add the new menu item. What should you do?

A. Set the Mode to Work

B. Set the Mode to Indirect

C. Set the Activity code to Cancel work

D. Set the Activity code to None

B

HOTSPOT - A company uses outside carrier services for inbound and outbound deliveries. Carrier services must be scheduled so that all trucks do not show up at the same time. You need to configure the Transportation Management module to schedule the loads. How should you set up dock appointments? To answer, select the appropriate options i the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Select the load:

• Select Open Load

• Select Closed Load

• Select Shipped Load

• Select Closed Container

Create the appointment:

• Create an appointment rule and firm the appointment

• Create and close an appointment

• Group the sales orders into a container

• Firm the load for shipment

Select the load:

• Select Shipped Load

Create the appointment:

• Create an appointment rule and firm the appointment

A company uses Dynamics 365 Supply Chain Management for wave processing. The system must automatically create a wave when a sales order is released to the warehouse. You need to configure the system to meet this requirement. Which configuration should you enable?

A. Automate wave release

B. Assign to open waves

C. Process wave automatically threshold

D. Automate wave creation

D

HOTSPOT - A company uses several freight carriers. Freight is calculated by mileage. You need to configure the system. Which values should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Set up engines:

• Mileage, Rate

• Freight Bill type, Mileage

• Rate, Zone

• Zone, Transit time

Configure rate engine metadata:

• Rate base type

• Zone master

• Mileage engine configuration

• Zone master and Rate base type

Set up engines:

• Mileage, Rate

Configure rate engine metadata:

• Rate base type

A company plans to implement Dynamics 365 Supply Chain Management shipping manifests. The company wants to use a multiple-level manifest process. You need to ensure that the system is configured for multiple-level manifest processing. What should you validate?

A. All container groups are manifested before the shipment is manifested

B. All containers are of the status open before the group is manifested

C. The allow split picks configuration is enabled

D. All container types are set up with all four attributes

A

You are implementing containerization functionality. You must automate containerization so that containers and picking work for shipments are created when a wave is processed. The work lines will be split into quantities to into required containers by size. You need to set up a container build template that defines the containerization process. Which three items should you set up before you create the container build template? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. a wave template that includes the containerize method

B. container packing policies

C. a container group

D. container types

E. container packing strategies

A, C, and D

You are the inventory manager at a large distribution company. You notice item P0001 has been running out regularly and the on-hand count seems to differ from what is in Dynamics 365 Supply Chain Management. You want cycle count work to be automatically created when the quantity drops below 10 pieces, which is about once a week. You need to appropriately configure warehouse management to generate cycle count work. What should you do?

A. Create a cycle count plan for item P0001 to run when the quantity is below 10.

B. Create a cycle count threshold that is percentage based that will generate work when inventory drops below 10% for item P0001.

C. Create a cycle count threshold that is quantity based and specify 10 for the quantity. Add P0001 as a selected item.

D. Create a cycle count plan for item P0001. Generate a batch job that runs once a week.

C

A company receives a large quantity of inventory into the warehouse. The inventory has a short shelf life and must be sent out to the stores as soon as possible. You need to use Buyer's push to transfer the inventory out to the stores.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Create a sales order.

B. Create transfer orders.

C. Select Product and ship open sales orders.

D. Select Product and distribution method.

B and D

You are the logistics manager at a distribution company. Your primary carrier service provides rates for transportation between New York City and Colorado. These rates are a at rate depending on the city or general area of pickup as follows:

✑ New York City = $500

✑ Colorado = $450

You need to set up Transportation Management to calculate the rate from New York City to Colorado. What should you do?

A. Set up zones in the Zone Master for New York City and Colorado. Assign rates to each zone in the Zone Master by starting and ending location.

B. Using the Point-to-Point engine with an empty break master, assign rates based on starting and ending locations.

C. Create a Point-to-Point based Rate Master with the rates broken out by pieces.

D. Create a Shipping carrier and service. Create carrier accessorial charges to represent the rates for each location.

B

DRAG DROP - New order items arrive from vendors and come into a company's main warehouse. You must set up internal transportation processes in Dynamics 365 Supply Chain Management to distribute goods to other locations. You need to set up inbound orders through transportation management. In which order should you perform the actions?

To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select. Select and Place:

Actions:

• Confirm a load for shipping

• Plan appointments for a load

• Assign a rate and route to the inbound load

• Register driver check-in and check-out for a appointment

• Create or modify an inbound load for shipping

• Create or modify an inbound load for shipping

• Assign a rate and route to the inbound load

• Plan appointments for a load

• Confirm a load for shipping

• Register driver check-in and check-out for a appointment

HOTSPOT - A company uses Dynamics 365 Supply Chain Management. There are two warehouses. All inventory is purchased into Warehouse1 and transferred to Warehouse2 based on replenishment rules. Planned orders were generated overnight by the master planning engine and do not need to be reviewed. Warehouse1 orders for Warehouse2 do not show as available for picking and shipping. Planned orders must be available for warehouse processing as quickly as possible and processed as a group.

You need to configure the system to meet the requirements. Which solution should you configure for each requirement?

To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Filter the appropriate planned orders:

• Warehouse 1 Transfer Orders

• Warehouse 2 Transfer Orders

• Warehouse 1 Purchase Orders

• Warehouse 2 Purchase Orders

Process as a group:

• Firm

• Firm All

• Group orders

• Parallelize firming

Increase speed of processing:

• Firm All

• Parallelize firming

• Performance software development kit (SDK)

• Planning optimization

Filter the appropriate planned orders:

• Warehouse 1 Transfer Orders

Process as a group:

• Firm All

Increase speed of processing:

• Parallelize firming

DRAG DROP - A distribution company uses Dynamics 365 Supply Chain Management. Users in the warehouse must have the ability to create and process transfer orders from a mobile device. You need to complete the setup. Which areas should you configure? To answer, drag the appropriate areas to the correct prerequisites. Each area may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

Areas:

• Warehouse management setup

• Feature management

Prerequisite:

• Process warehouse app events

• Create transfer orders from the warehouse app

• Confirm outbound shipments from batch jobs

• Configure the mobile device menu item

Process warehouse app events

• Warehouse management setup

Create transfer orders from the warehouse app

• Warehouse management setup

Confirm outbound shipments from batch jobs

• Feature management

Configure the mobile device menu item

• Warehouse management setup

A retail distributor is implementing Dynamics 365 Supply Chain Management.

Wholesale customers receive 10 percent off list price for the current calendar year. Customer A is a wholesaler that agreed to a pilot program for a new product, with terms to receive a discounted set price for 100 each of the product for the next six months. The distributor will charge penalties to Customer if the 100 each are not sold within the period.

You must configure pricing for Customer. Which three configurations should you set up? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Create a sales agreement with the price and discount is fixed parameter set to yes.

B. Create a trade agreement for wholesalers.

C. Set the find next parameter on trade agreements.

D. Create a sales agreement with the max enforced parameter set to yes.

E. Set the effective date on the trade agreement to begin after the sales agreement

A, B and D

HOTSPOT - A distribution company implementing Dynamics 365 Supply Chain Management has two warehouses. One item is purchased and stocked in only Warehouse1. Occasionally, Warehouse2 requires this item based on customer demand. When this occurs, an order for the item must be automatically created for Warehouse2. You need to configure the automation of the order for Warehouse2. What should you configure?

To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Configure refilling warehouse:

• Warehouse 1

• Warehouse 2

Generate order type:

• Transfer

• Replenishment

• Purchase

• Kanban

Configure refilling warehouse:

• Warehouse 2

Generate order type:

• Transfer

A company uses Dynamics 365 Supply Chain Management. The working time template is left blank when the period template is configured. You need to determine the workdays that will be used in the inventory replenishment reporting. Which workdays will be used?

A. calendar setup on the warehouse

B. system calendar for the country

C. 5-day work week

D. system date dimensions

E. 7-day work week

E

A company is implementing the Warehouse management module in Dynamics 365 Supply Chain Management.

The company will receive an item in three units of measure (UOM): each, case, and pallet. The item must be counted from a mobile device in each UOM or case UOM only by the warehouse worker.

You must configure the item. What should you configure?

A. Create a reservation hierarchy and dene the rules.

B. Set the default inventory unit of measure to each and the default purchase and sell unit to case.

C. Create one unit sequence group and enable counting per unit of measure.

D. Set the default inventory unit of measure to each and assign the default item set up to case.

E. Create separate unit sequence groups, one for case counting and one for each counting.

C

HOTSPOT - A company implementing Dynamics 365 Supply Chain Management has multiple warehouses, some of which are Warehouse Management enabled.

The company must hold inventory for the following purposes:

• On-hand inventory available for all transactions except for sales orders.

• Automatic hold on inbound purchase order inventory.

• Damaged on-hand inventory that can be transferred from a mobile device, leaving the undamaged inventory available.

You need to determine the feature that applies to each company requirement. Which features should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

On-hand inventory available for all transactions except for sales orders:

• Quality order

• Ordered reserved

• Inventory blocking

Automatic hold on inbound purchase order inventory:

• Quality order

• Automatic reservation

• Inventory blocking

Transfer of damaged on-hand inventory from a mobile device:

• Inventory status

• Nonconformance

• Inventory blocking

On-hand inventory available for all transactions except for sales orders:

• Inventory blocking

Automatic hold on inbound purchase order inventory:

• Quality order

Transfer of damaged on-hand inventory from a mobile device:

• Inventory status

A company is using advanced warehouse functionality in Dynamics 365 Supply Chain Management.

A batch-tracked item in high-demand caused delays on sales orders. The vendor delivery is expected today. Sales orders must be held until the items are checked for quality.

You need to set up batch attributes to allow for warehouse processing but hold sales orders. What should you configure?

A. Unavailable status, block reservation, picking and shipping

B. Unavailable status, block shipping

C. Available status, block shipping

D. Unavailable status, block picking and shipping

E. Available status, block reservation, picking and shipping

D