1/5
Looks like no tags are added yet.
Name | Mastery | Learn | Test | Matching | Spaced | Call with Kai | Chat |
|---|
No analytics yet
Send a link to your students to track their progress
What’s Step 1 when performing air brake test
press on accelerator 10 rpm to build pressure to get governor cutoff to 120-140 psi roll down window to hear sneeze
Name the steps you take before beginning 4 stages (7)
Engine off
Wheels are chocked
Transmission neutral
Turn key to on position
Check ABS on dashboard/ side of truck to indicate working properly( should turn on then off)
Push in red yellow brakes to supply air
Turn engine on
Start gov cutoff
What’s Step 2 when performing air brake test??
Applied break test. After turning key on wait for gauge to stabilize then hold break for 1min make sure no more than 4psi lost in one minute or indicates leak
What’s Step 3when performing air brake test
Low pressure warning .Apply break till light comes on should come on or at 55 psi
What’s Step 4 when performing air brake test
Low pressure pop out. Press break till park valve and trailer valve (red and yellowe) pop out at 45-20 psi