permit test

What is the minimum age at which you can get a Class C driver license without either driver education or being a hardship case?

18 and up

Right of Way: Intersections - Intersections controlled by signs or signals

Know the meanings of all signs and obey them

Right of Way: Intersections - Single or two lane road intersecting with multiple lane road

when driving on single or two lane road you must yeild to vehicles traveling on a divided street or roadway or a vehilcle traveling on a road with three or more lanes

Right of Way: Intersections - Unpaved Road intersecting a paved road

If driving on the unpaved road you must yeild to the driver on the paved road

Right of Way: Intersections - intersections not controlled by signs or signals

Yeild to vehicles on your right. Check and make sure noone is approaching from left either before proceeding even though you have right of way.

Right of Way: Intersections - Turning Left

Yeild to any vehicles coming straight through in the other direction (yeild to approaching vehicles)

Right of Way: Intersections - Private Roads and Driveways

When entering a road from a private road or driveway yeild to all approaching vehicles and pedestrians

Right of Way: Intersections - T- intersection

when approaching a through street from a street that ends in an intersection yeild to vehilcles on through street

Right of Way: Intersections - Entering or leaving controlled access highway

If traveling on controlled acess highway yeild to vehicles entering and leaving the roadway

Right of Way: Intersections - Multiple lane road ways

On a roadway divided into three or more lanes providing for one way movement, a vehicle entering a lane from the right should yeild to a vehicle entering the lane from the left

Right of Way: Intersections - Railroad crossings

Vehicles must stop within 50 but not less than 15 feet from the nearest rail if a clearny visible railroad sign warns of an approaching vehicle, a crossing gate is lowered or a human guard warns of approaching train, an official traffic control light or device, a train approaching within 1500 feet emits a signal audible from such a distance and presents a danger, an approasching train is visible.
Failure to comply results in a fine $50 - 200

What do you do when a railroad crossing is marked with only a crossbuck sign?

Slow down, look both ways, listen for approaching train. If a train is approaching, stop. If not, proceed with caution

What do you do if red lights are flashing at a railroad crossing?

Stop. Remain stopped until train passes and lights stop flashing.

What do you do when crossing arms at railroad have been lowered?

Stop. Wait until train passes and gates are raised.

Stopping on train tracks?

Never do it. If your car stalls on the tracks and you can't restart it, try to push it off the tracks. If you can't push it, get help. If train is approaching, get out and get away from tracks. Run in the direction from which the train is approaching to avoid debris.

What to do when there are multiple sets of tracks?

make sure both sets of tracks are clear before proceeding

Who has the right of way at train tracks?

Trains ( they do not and cannot stop)

What to do when listening for a train?

Roll down window and turn down radio if neccesary

What do you do when an emergency vehicle with a siren, bell or flashing red light approached?

Pull to the right edge of the roadway and stop. In congested traffic, slow down and leave a clear path for the emergency vehicle.

How far behind a firetruck or ambulence with flashing lights can you travel?

500 feet.

When an emergency vehicle is parked at the scene of an emergency what should you do?

Do not enter or park in that block. If there are two or more lanes vacate the lane closest to the vehicle, or slow down to a speed 20 miles under the speed limit in an area 25mph or more, or to 5 mph in an area less than 25mph

What to do when a school bus is displaying alternately flashing red lights?

If bus is stopped and displaying alternatly flashing red lights you must stop (from either direction) and not proceed until the bus has resumed motion or the driver signals you to proceed.

When do you NOT need to stop when meeting or passing a school bus?

When the bus is on a different roadway, or when you are on a controlled access highway and the bus is stopped in a loading zone and pedestrians are not alowed to cross the roadway.

What are the penalties for not obeying the school bus rules?

A fine of $200 - $1000. A second conviction can result in a liscense suspension for up to 6 months. The offense is a Class A Misdemeanor if the person causes serious harm to any person, or a state jail felony if the person has previously been convicted of causing serious injury to another.

When do pedestrians have the right of way?

Always.

What does a red light mean?

Stop. You may turn right unless specifically prohibited. You may turn left if both streets are one way.

What does a yellow light mean?

Caution. Stop before entering crosswalk before intersection. If stop can not be made proceed through the intersection cautiously.

What does a green light mean?

Go. (Duh.) But still watch for pedestrians or reckless drivers.

What does a green arrow with a red light mean?

You may proceed carefully in the direction of the arrow after yeilding to pedestrians and other traffic.

What does a flashing red light mean?

Stop completly before entering an intersection and proceed only when safe to do so.

What does a flashing yellow light mean?

Caution. Slow down and proceed carefully.

What does a left turn yeild on green sign mean?

You may turn left when the light is green but you must yeild to all other traffic.

What are the purposes of traffic signs?

- to WARN of hazards ahead
- to GUIDE drivers to their destination by identifying the route
- to INFORM of local regulations and practices
- to REGULATE the speed and movement of vehicles

Standard sign colors: red?

Stop or prohibition

Standard sign colors: green?

Indicated movements permitted, direction guidance.

Standard sign colors: blue?

Motorist services guidance

Standard sign colors: yellow?

general warning

Standard sign colors: Black/ White?

Regulation

Standard sign colors: Orange?

Construction and Maintnence warning

Standard sign shapes: Octagon?

used exclusively for stop signs

Standard sign shapes: Horizontal Rectangle?

Generall used for guide signs

Standard sign shapes: equilateral triangle?

used exclusively for yeild signs

Standard sign shapes: pennant?

Advance warning of no passing zone

Standard sign shapes: Diamond?

Exclusively to warn of existing or possible hazards on roadways or adjacent areas

Standard sign shapes: vertical rectangle?

generally for regulatory signs

Standard sign shapes: pentagon?

school advance and school crossing zones

Standard sign shapes: round?

Railroad advance warning

stop sign. Must bring car to complete stop. do not block cross walk.

All way sign. (sometimes 4 way) added to stop sign means all approaching traffic must stop

Yield Sign. Road you are on joins with another, slow down or stop to yield right of way to vehicles already on the other road.

Warns of traffic control signal ahead

"School Zone Sign" the speed shown is in effect when yellow light is flashing. Watch for children

The divided highway on which you are on ends. Be careful as you approach the point where two way traffic begins again.

Yellow sign. Two arrows going in opposite direction and a bump on the bottom between the two arrows.

Height of Underpass from road surface is shown, do not try to enter if your vehicle is higher than the figure on the sign.

Yellow sign will have arrow pointing up and arrow pointing down along with the clearance measurements

Slow down on wet road do not turn, speed up, or stop.

Advises that you are approaching an area of highway were opposing flow of traffic are divided by a median island.

Yellow sign with an arow going up and another going down with a bump at the top between the two arrows

You should drive on the right and expect oncoming traffic in the lefthand lane.

What does a yellow dashed line mean?

Keep to the right of the yellow dashed line, you may cross to pass or if half of the roadway is closed but never cross the dashed yellow line if not safe to do so.

what does a broken white line mean?

on a one way road way, when each lane is marked with a broken white line you may drive in any lane, make sure to be in the right lane for turns well in advance.

When should a driver be in the center (left turn) lane? (with double yellow lines, the inner lines dashed the outer solid)

The only time a driver should enter the center lane is at a point where the vehicle will have time to slow down or stop in order to make a safe left turn maneuver. The center lane should never be used for passing or through traffic.

What do double yellow lines mean on multilane (four or more lane) highways?

do not cross the double yellow line to pass. Stay in your lane as much as possible. If moving slow stay in right hand lane.

What does a solid line with a broken line mean?

If the solid line is on your side it means no passing zone.

what do white stoplines mean?

you must stop behind the white stopline

What do solid white lines mean?

Solid white lines are used for pavement edge lines, shoulder markings, channelizing, transitions and lane use control. Crossing these lines should be avoided if possible. The solid yellow line on the side of the road cannot be crossed and idicates the left edge of the roadway. This can be found on interstate highways.

What do double solid white lines mean?

Crossing is prohibited

What happens to fines in construction zones when workers are present?

they are doubled

you must signal when...?

You change lanes, make a turn, pull away from a parking space which is parrallel to the curb, when you slow down or stop.

Whats the hand signal for turning left?

Arm Straight Out

Whats the hand signal for turning right?

Arm UP

Whats the hand signal for stopping or slowing down?

Arm down

How far before a turn or stop do you have to signal?

100 ft. (Be sure to turn it off after turn)

When should you NEVER drive on the left side of the road to pass?

1. When prohibited by pavement markings 2. when there are two or more traffic lanes in each direction 3. When within 100 ft (5 car lengths) of intersection or railroad crossing 4. when on a hill, curve, or other place where vision is limited. 5 When within 100 ft of tunnel, bridgem or viaduct.

When should you NOT keep to the right of the road?

1. When passing another vehicle on a two or three laned street. 2. When driving on a one way street. 3. When the right half of the road is blocked

What are the saftey rules when passing another vehicle?

1. Make certain that the road is clear. 2. Give the proper signal before changing lanes. 3. Tap horn if neccesary to avoid surprising the driver ahead. 4. Avoid cutting in too quickly if you must return to your original lane.

What is the first step in passing somebody on a two lane road?

Keep enough distance between you and car in front so you can see ahead clearly. Check rearview, sideview mirrors, turn head look back. Signal Left.

What is the second step in passing somebody on a two lane road?

Check ahead for any no passsing zones or oncoming vehicles and be sure you have enough time to overtake the car ahead and return to your lane before an approaching car is within 200 feet.

What is the third (optional) step in passing somebody on a two lane road?

Tap horn if neccesary to alert the driver ahead of you

What is the fourth step in passing somebody on a two lane road?

Pass on the left side and do not return to your lane until you can see the car you just passed in your rearview mirror.

What is the fifth and final step in passing somebody on a two lane road?

Signal right and return to the right lane. Be sure to turn your turn signal off.

According to Texas law, when may you pass on the right side of the road?

1. The road is wide enough for two or more lanes in each direction and is free of any obstructions. 2. You are on a one way road. 3. You may pass on a paved shoulder when the vehicle you are passing is slowing or stopped on the main travelled portion of the highway, disabled, or preparing to make a left turn. * NEVER pass on the right by driving off the paved portion of the highway

What should you do when you are passed?

1. Do NOT increase your speed. 2. Keep in your lane. 3. When you are being passed on the left and lanes are not marked move to the right as far as you safely can. 4. make it as safe and easy for the other driver to pass you as you can.

How do you avoid driving in a vehicles blind spot?

Either pass the driver or drop back so you do not stay in the drivers blind spot. approach cautiously, but once alongside the other car speed up and get by quickly.

What are the seven steps of making a good turn?

1. Make up your mind before you get to the turn. Never make a dangerous last minute turn. 2. Look behind and to both sides to see where other vehicles may be before you change lanes. 3. Move into the proper lane as soon as possible. The faster traffic is moving the sooner you should get into the proper lane. If you are not in the proper lane at least one half block before your turn, don't turn. 4. Give the proper signal at least 100 ft. before your turn. 5. Slow down but do not use the brakes or clutch during the actual turn. 6. Make the turn correctly. 7. Finish the turn in the proper lane.

How should you make a right turn?

1. Well ahead of the turning point, signal for a lane change and move your vehicle into the far right lane. 2. Signal right and start slowing down at least 100 ft from the corner. 3. Look both ways before starting to turn. 4. Keep as close to the right edge as possible. Turn using both hands on the wheel.

How should you make a left turn?

1. Well ahead of the turning point signal for a lane change and move close to the center lane. 2. Signal left and start slowing down at least 100 ft from teh corner. 3. Look in all directions carefully before starting to turn, stay to the right of the centerline as you enter the intersection. Yeild the right of way to any vehicle approaching from the opposite direction. 4.Complete the turn right of the centerline of teh road you are turning by entering the lane in which you will interfere the least with other traffic.

When turning, what pavement markings and signs should you watch for?

Those which permit or prohibit turning left or right from or into two or more traffic lanes. or those which give other special turning or lane information.

How should you make a left turn from or onto a oneway street?

If you are turning left FROM a one way street turn from the left lane. If you are turning left INTO a one way street, enter that street in the left lane.

Where should you never park stop or stand a vehicle?

1. On the roadway side of any vehicle stopped or parked at the edge or curb of a street. 2. On a sidewalk 3. Within an intersection. 4. On a cross walk. 5. Between a saftey zone and adjacent curb or within 30 ft of a place on the curb immediately opposite the end of a saftey zone. 6. Alongside or opposite any street excavation or obstruction when stopping, standing, or standing would obstruct traffic. 7. Upon a bridge or other elevated structure upon a highway or within a higway tunnel. 8. On a railroad track. 9. ANy place prohibited by an official sign.

Where should you never park or stand a vehicle (temporary stopping is allowed)?

1. In front of a public or private driveway. 2. Within 15 feet of a fire hydrant. 3. Within 20 ft. of a cross walk at an intersection. 4. Within 30 ft. upon the approach to any flashing signal, stop sign, yeild sign, or other traffic control signal located at the side of a road way. 5. Within 20 ft of the driveway entrance to any fire station within 75 feet of said entrance.

Within how many feet of a railroad should you never park your vehicle?

50

If you cannot park off a roadway, what should you do?

1. Leave plenty of room for others to pass. 2. Be sure that your vehicle can be seen for at least 200 feet in both directions. 3. If at night, use your parking lights or leave your headlights dim. (Bicycles may be parked on a side walk as longa s it does not seriously impede traffic)

What is the penalty for parking in a disabled spot?

Class C Misdemeanor and up to $500 fine.

What are the 4 steps of parallel parking?

1. Choose a space large enough for your car. Signal, stop even with the car in front of you about 2 ft. from it. 2. Make sure you will not interfere with oncoming traffic, then turn your front wheels all the way to the right and back slowly toward the curb. 3. When your front seat is opposite the rear bumper of the car ahead, quickly turn your steering wheel all the way to the left. Back slowly to the car behind without touching it. You should be beteen 6 and 18 inches from the curb. 4. Straighten your front wheels and pull into position, then center your car in the spot.

How should you turn your wheels when parking downhill?

Turn the front of your wheels to the curb.

When parking uphill on a hill with a curb how should you turn your wheels?

back of your front wheels to the curb

When parking uphill on a hill without a paved curb how should you turn your wheels?

Turn the front of your front wheels to the side.

What should you do to make sure the oath is clear when you back up?

Look backwards.

What is a good rule for maintaining a safe distance between you and the driver in front of you?

Stay at least two seconds behind the vehicle. Meaning look at a fixed object, you should pass it two seconds after the car in front of you does.

When traveling 20 mph how much distance does it take to stop?

63 feet

When traveling 30 mph how much distance does it take to stop?

109 ft.