Shop Test Information

Which of the following is closer in function to a band saw or coping saw?

 Scroll saw

Allen wrenches:

Fit in the hexagonal recess in the head of a screw

Anchor bolts are used to hold the:

Concrete blocks to the footing

Which tool is used to bend large sections of sheet metal?

Brake

This type of pattern on metal is made by a process called:

Knurling

Which of these does not make wide chips when used…. Awl, lathe, jack plane, drill press?

Awl

The best saw for accurately cutting 3 inches of length of a 2” x 8” x 18’ piece of lumber is a:

Radial arm saw

The adhesive that usually comes in two parts and must by mixed together before being used is:

Epoxy

What type of screw drier would be used for a screw in the shape of a plus sign?

Philipps

What is placed around a chimney to prevent leaks?

Flashing

Which of the following uses a penny system to specify its size?

Nails

The technique for joining copper water pipes is called?

Soldering

To make a wide groove in a board with a table saw, what type of blade would you use?

Dado

Which of the following is NOT like the others…. File, Wrench, Grinder, Oilstone?

Wrench

Which of these is installed with a strike by a hammer…. Nut, brad, socket, washer?

Brad

A utility knife is commonly used to cut:

Carpet

The alignment of fibers in a piece of wood defines its:

Grain

In construction, a flaring tool is associated with:

Pipe

What is used to change a circular saw blade?

An Allen wrench

Corse sandpaper is identified by a:

Low grit number

What is used to cut concrete patio pavers to size?

Wet saws

Backfill normally refers to a  mixture of:

Stone and earth

In construction , a flaring tool is associated with:

Pipe

The term “MDF” refers to:

Medium density fiberboard

Damaged or rusted threads on a machine screw are typically repaired using a:

Die

Which of the following saws is most likely to cause kickback?

Circular saw

Which of the saws is used to cut through exterior walls for the purpose of installing a window?

Reciprocating (Sawzall)

The collar attached to this drill is commonly used to:

Control the depth of the hole

Which of these is typically used to cut across the grain of lumber…. Jig, jointer, band saw, radial arm saw?

Radial arm saw

Which of the following materials is typically used to construct a wood deck?

Joist hangers

What is the purpose of an anil?

To shape hot metal

Which of the following woodworking objects would most likely be created with a lathe?

Table leg