Module 3

One-hand steering is acceptable when backing the vehicle.

true

The steps for preparing to move a parked or stopped vehicle from the curb or side of the roadway should be followed in this order:

(1) keep foot firmly on the brake, (2) select the proper gear, (3) check traffic, (4) use proper signals, (5) release the parking brake, (6) recheck traffic including the mirrors and blind spots, (7) select a gap, (8) move foot from brake to accelerator, (9) move to the proper lane.

When stopping on the right side of the road, you need to position your vehicle in lane position 3.

true

The proper method for backing straight involves positioning your left hand on the steering wheel at the 12 o'clock position while looking over your right shoulder.

true

It is unnecessary to signal if you are pulling to the curb to stop.

false

When backing up and turning, you should look in the direction of the turn.

true

When coming to a stop, it is a good idea to tap your brakes before applying full pressure to let other drivers know what your intentions are.

true

The pivot point for backing and turning is the door post.

false

To back to the right, a driver will need to steer left.

false

It is unnecessary to come to a complete stop when exiting a driveway, provided that there is no approaching traffic.

false