Module 11.7 ATA 25 Equipment and Furnishing Flashcards

Fill-in-the-blank flashcards covering Module 11.7 ATA 25 equipment and furnishings including regulatory standards, emergency systems, seats, oxygen equipment, and cargo handling.

When an airliner is certified, it meets the requirements for emergency equipment installation in accordance with __________ specifications.

CS-25 (Large Commercial Aircraft)

According to CS.25.851(a)(1), the manufacturer must make provisions for 4 portable fire extinguishers on a __________ aircraft.

$$250\text{-seat}$$

The primary function of the technician is to ensure all required emergency equipment is in its specified location and __________.

serviceable

An escape slide is required on all commercial passenger aircraft doors where the floor is __________ or more above the ground.

$$6\text{ feet } (1.8\text{ m})$$

Emergency escape slides are connected to the aircraft structure by a detachable __________.

Girt Bar

In civil passenger aircraft that are not fitted with emergency slides, __________ are provided at all emergency exits.

emergency escape ropes

Aircraft emergency life jackets are primary inflated using a small cylinder filled with __________ gas.

carbon dioxide

Cabin fire extinguishers are normally of the __________ type.

halon

If an aircraft first aid kit has a missing or broken seal, it must be forwarded to an __________.

approved inspection facility

In non-pressurized aircraft that routinely fly above __________, passenger oxygen is provided by fixed or portable systems.

$$10,000'$$

For pressurized aircraft certified to operate above __________, emergency passenger oxygen is usually supplied by chemical oxygen generators.

$$25,000'$$

Emergency passenger oxygen masks are designed to automatically deploy when the cabin altitude exceeds normally __________.

$$14,000'$$

The emergency passenger oxygen supply in pressurized aircraft must last a minimum of __________.

$$10\text{ minutes}$$

Passenger emergency oxygen systems must provide enough masks for at least __________ more passengers than there are seats.

$$10\%$$

Aircraft passenger seats are manufactured to withstand crash impacts up to 16 times the force of gravity under the __________.

$$16\text{ G standard}$$

Floor seat tracks allow adjustment of passenger seats forward and aft in __________ increments.

$$1\text{ inch}$$

Safety harnesses fitted to flight deck seats in transport aircraft are of the __________ type.

$$5\text{-point}$$

Electrical power supplied to aircraft galley heating appliances typically operates at __________.

$$115\text{ VAC}$$

Standardized aircraft cargo containers are officially known as __________.

unit load devices (ULDs)

To assist in maneuvering cargo pallets laterally and fore & aft near the cargo door, a __________ is used.

Power Drive Unit (PDU)