1/45
A comprehensive set of fill-in-the-blank flashcards covering the IADC Health, Safety and Environmental Reference Guide, focusing on safety protocols, equipment handling, and emergency procedures.
Name | Mastery | Learn | Test | Matching | Spaced | Call with Kai | Chat |
|---|
No analytics yet
Send a link to your students to track their progress
The recommendations made by the IADC Task Group for the Health, Safety and Environment program have been reviewed and endorsed by the __________.
IADC Board of Directors
The IADC guide is designed to supplement company HSE programs and __________ __________ procedures.
operating
The responsibility for the success of any accident prevention program is shared greatest by __________, Drillers, and other supervisors.
Rig Managers (Toolpusher)
One of the most important parts of any company's HSE program is conducting regular __________ __________.
HSE meetings
The three recommended actions to eliminate or control identified hazards in a Job Safety Analysis (JSA) are engineering the hazard out, providing guards or safety devices, and providing __________ __________ __________ (PPE).
personal protective equipment
A Job Safety Analysis should be used as a refresher for __________.
non-routine jobs
During an incident investigation, the worker(s) who had the incident should be interviewed, __________ __________ permitting.
medical considerations
Visitor and service personnel new to an offshore location should be assigned __________ __________ and lifeboats immediately upon arrival.
muster stations
Good housekeeping requires all temporary or permanent openings in the floor or deck to be properly guarded by __________ or other suitable means.
guardrails
Potable and non-potable water sources on the rig must be __________ to ensure safety.
labeled
Personnel should bathe daily and start each day with a clean change of clothes to avoid skin problems like __________ or boils.
irritating rashes
If NORM readings exceed __________ above background, local management must be notified before work continues.
50μR/hr
Heat stress occurs when the body's internal temperature cannot be maintained at the normal __________ level.
98.6∘F
Heat stroke is a medical emergency where the body temperature can reach as high as __________ to 107∘F.
105
Under the system of __________, every direct contact with body fluids is assumed to be potentially infectious.
universal precautions
Before performing maintenance on electrical equipment, the breaker switch should be __________ out/tagged out and tested.
locked
Any area on a drilling rig where flammable gases or vapors may be present in ignitable quantities is classified as a __________ location.
Class I
A Class I, Division 1 location is where hazardous concentrations of gases or vapors exist under __________ __________ conditions.
normal operating
Personnel should never stand or jump on a wrench when tightening pipe; instead, they should use __________ only if absolutely necessary.
cheaters
An alloy steel chain sling must be removed from service if the hook throat opening has increased by more than __________%.
15
A cable sling should be removed if there are __________ or more broken wires in one length of lay.
10
A personnel hoisting winch should be equipped with an __________ __________-__________ valve within easy reach of the operator.
emergency shut-off
To use a portable fire extinguisher correctly, personnel should follow the __________ system.
P A S S
Fires involving energized electrical equipment are classified as __________ fires.
Class C
The fire extinguishing agent specifically used for combustible metal fires (Class D) is known as __________ __________.
dry powder
A Hot Work Permit is required for any gas or electric welding done outside the __________ __________ area.
designated welding
For safety, oxygen cylinders must be separated from fuel gas cylinders by a minimum distance of __________ feet.
20
While driving a company vehicle, a driver should perform a __________ around the vehicle before putting it in motion.
walk
Crane Operators should be recertified every __________ years.
4
The minimum acceptable oxygen level for entry into a non-permit confined space is __________%.
19.5
An __________ __________-__________ atmosphere is one containing more than 23.5% oxygen by volume.
oxygen enriched
A confined space entry permit normally expires at the end of the __________ __________.
work shift
The primary adverse effect of cold on humans that lowers body temperature below normal is called __________.
hypothermia
The body loses __________-__________ of its heat through the head, making proper head covering essential in cold weather.
three-quarters
During offshore operations, Phase I of the storm procedure is an alert that a storm will __________ hit the area.
probably
The __________ is in total command of the helicopter and makes all flight-related decisions.
pilot
A __________-__________ __________ should be attached to a personnel carrier to control side-to-side movement during lifting.
snag resistant tagline
H2S is a highly toxic, colorless gas that is slightly __________ than air.
heavier
The characteristic odor of H2S at low concentrations is that of __________ __________.
rotten eggs
For H2S exposure, the acceptable eight-hour time-weighted average (TWA) is __________ ppm.
10
The major emissions concern for the petroleum industry include Hydrogen Sulfide, Carbon Monoxide, Ozone, and __________ __________.
Particulate Matter
In first aid, the three "hurry" cases are breathing, bleeding, and __________.
poisoning
For dropped object prevention, all light fittings in the derrick must have __________ __________ attached.
safety lines
A supplemental footing for a well servicing unit should be sized to carry the gross weight of the mast under __________ __________ hook load.
maximum anticipated
The maximum distance a person can fall before a fall arrest system must bring them to a complete stop is __________ feet additional after free-fall.
3.5
Standard guardrails must have a top rail height of __________ inches from the floor.
42