Disc/Belt Sander Safety and Operation

Vocabulary flashcards covering the key parts, operational sequence, and safety rules for operating a disc/belt sander.

Rim Guard

A protective guard on the disc/belt sander that must be kept secure, in place, and operating correctly at all times.

Table

The support surface component of the disc/belt sander where stock must be placed securely during sanding.

Downward Feed

The side of the disc or belt moving downward where stock must be placed and constantly moved against to ensure quality work.

Upward Feed

The upward spinning side of the disc or belt sander, which should not be used for sanding stock.

On/Off Switch

The machine component used to turn the disc/belt sander on and off.

Two-Hand Rule

The safety requirement specifying that two hands must be kept on the stock being sanded.

Burn Prevention Rule

The safety precaution to avoid placing hands or fingers against the disc or belt to avoid burns.

Instructor Notification Protocol

The requirement to notify the instructor if the disc or belt becomes extremely worn or damaged.

Machine Stop Rule

The safety procedure to wait for the machine to come to a complete stop before moving away from the machine.

Disc/Belt Sander Operation: Step 1

Check that all guards are secure and in place.

Disc/Belt Sander Operation: Step 2

Identify the downward feed side of the disc or belt sander.

Disc/Belt Sander Operation: Step 3

Turn disc/belt sander on.

Disc/Belt Sander Operation: Step 4

Place stock against disc on the downward feed side.

Disc/Belt Sander Operation: Step 5

Constantly move stock against downward feed side to ensure quality work.

Disc/Belt Sander Operation: Step 6

Move stock away from disc/belt sander.

Disc/Belt Sander Operation: Step 7

Turn disc/belt sander off.

Disc/Belt Sander Operation: Step 8

Wait until machine comes to a complete stop to move away from machine.