TLE (second quarter periodical examination)

Holding Tools

these tools require tool or device to hold and keep them in place.They keep the stock steady while work is being done on it such as measuring, cutting, sharping, or assembling.

Hand screw, c-clamp, steel bar, machinist vise

what are the kinds of holding tools?

Hand Screw

this is a wooden parallel clamp with jaws measuring 6 to 20 inches and open to a distance 4 to 20 inches. The jaws are opened or closed by turning the house of each splindle.

6 To 20 Inches and open to a distance 4 to 20 inches

(FILL IN THE BLANKS) the Hand screw is a wooden parallel clamp with jaws measuring _______ and open to a _______.

C-Clamp

this tool is shaped like the letter C which is used to hold portion of work together.

Steel Bar

this is also known as the cabinet clamp. It is a steel beam or bat fitted with a screw and crank at the one end, and a steel head can be moved along the bar.

Cabinet Clamp, Steel Beam or Bat Fitted

(FILL IN THE BLANKS) the Steel Bar is also known as the ______? it is also a _______ or ______.

Machinist Vise

this is a piece of equipment used for holding small woodworking articles.

Small Woodworking Articles

(FILL IN BLANKS) the Machinist Vise is a piece of equipment used for holding ________?

Driving Tools

these tools cause movement or result in the functioning of other tools.

Screw Driver, Nail Set, Mallet, Claw Hammer, Sledge Hammer, Ball Peen Hammer

what are the kinds of driving tools?

Screw Driver

this tool is used to tighten loose screw.

Nail Set

this is used for driving nails below the wood surface.

Mallet

this is a wooden hammer used to drive chisel and gauges.

Claw Hammer

this is used to drive and pull out nails.

Sledge Hammer

this is used to demolish concreate walls or crush rock, it is a strong driver for wedge, files, or stakes.

Ball Peen Hammer

this is a ball or metal attached to the back of the head used to make dents on metal as well as to upset and expand end of the vest.

Boring and Drilling Tools

the gimlet, hand drill, expensive, auger bit, and twist drill, are ________

Gimlet

this is small tool with a handle attached at right angle to the bit and used to bore holes on wood or any article in basketry.

Hand Drill

this is used to twist for driving small holes

Expensive

this is a bit that holds cutter of different sizes and used to bore a hole larger than 1 inch.

Auger Bit

this is a single twist or double twist bit size from ¼ to 16 inches and to bore holes or larger than.