Powerplant and Propeller Inspections (Jeppesen Ch 13 Section A)

Annual type inspection must have at least the minimum items stipulated in

14 CFR 43 Appendix D

When you encounter a new or unusual maintenance it is required to complete and submit an FAA form _______________________ malfunction or defect report.

8010-4

If the FAA determines a trend with a particular aircraft or component it publishes the information in _____________________

AC4316

An ________________________________________ is issued in accordance with 14 CFR 21 Subpart E.

Supplemental Type Certificate

What does A.F.M. stand for?

Aircraft Flight Manual

What does P.O.M. stand for?

Pilot Operation Manual

Prior to the 1958 U.S. aircrafts were certified under the __________________________________________ they are similar to your Type Certificate Data Sheet with the addition of an equipment list.

Civil Air Regulation

What rating must an aircraft maintenance technician have to perform a 100-hour inspection on an engine or propeller?

Powerplant

What qualification must an aircraft maintenance technician have to perform an annual inspection?

Inspection Authorization

The ____________________________________________ is the document that defines the airworthiness of an aircraft.

Type Certificate Data Sheet

The information in a Type Certificate Data Sheet is considered FAA-_____________________.

approved

Any aircraft modification that deviates from the Type Certificate Data Sheet is considered a ________________________________ and requires documentation on FAA Form _____________.

major alteration/337

For which three major components are Type Certificate Data Sheets issued?

Airframe

Powerplants

Propellers

A _______________________________________________ contains the methods and techniques that permit an aircraft to be modified and returned to service without additional engineering or flight test requirements.

Supplemental Type Certificate

An ______________________________________ is a regulatory instruction that must be followed.

Airworthiness Directive

_______________________________________ provide interpretive and clarifying information about aircraft maintenance practices that are considered acceptable by the FAA Administrator.

Advisory Circulars

A manufacturer provides ________________________________________ to communicate potential discrepancies and remedies to aircraft owners, operators, and maintenance technicians.

Service Bulletins

Given that an annual inspection is required every 12 calendar months, an inspection completed on June 4 is valid until _______________ of the following year.

June 30th

Where does the FAA list the regulatory inspection items?

14 CFR 43, Appendix D or FAR 43, Appendix D

Before you can inspect an aircraft according to a progressive inspection program, the plan must be submitted to the local _________________________________________ and approved for use.

Flight Standards District Office

Large and turbine-powered multiengine aircraft are typically inspected in accordance with a _________________________________

continuous airworthiness inspection program

An entry in the aircraft's ______________________________________ is required after every inspection.

permanent maintenance record

_______________________________ refers to the range of nontechnical causes of accidents and incidents that can be mitigated by thoughtful, efficient policies and procedures.

Human Factor

The ____________________________ identifies the location and part numbers of items installed on an aircraft, or in a subassembly component.

Illustrated Parts Catalog

Like the IA performing an annual, an ______________________________ performing a 100-hour inspection may not delegate inspection tasks to anyone else.

Aircraft Maintenance Technician

If the A.M.T. who inspects the aircraft has inspection authorization, the 100-hour inspection may be signed off as an ___________________________

annual inspection

What does A.A.I.P. stand for?

Approved Aircraft Inspection Program

A continuous airworthiness inspection program is designed for commercial operators of large aircraft operating under __________________________________

14 CFR Parts 121 or 135

_________________________________________ requires an entry in the aircraft's permanent maintenance record whenever an inspection is completed.

Federal Aviation Regulations