Tool Usage and Safety Quiz Part 2 (Tech Theater retake)

A ________ is used to round off and shape wood

Shur-form

A _________ is used only to cut metal. It’s a relatively slow saw.

Hacksaw

A _________ gives a smooth cut, and is often used with a mitre box.

Backsaw

A 1 by 4 is actually ______________

3/4 of an inch by 3 1/2 inches

A 2 by 4 is actually ________________

1 1/2 inches by 3 1/2 inches

¼ inch B/C plywood is commonly used for ____________

Corner blocks and keystones

C/D/X plywood is REALLY rough on the ___________ side.

D side

¼ inch luan plywood is usually used for ___________

Covering flats

Always store lumber ____________ to keep it from warping.

Horizontal and flat

__________ have a rounded head so they will fit up pretty flush to a platform

Carriage Bolts

___________ are used when a piece of scenery is not moved around a lot.

Nails

______________ have greater holding power and should be used when scenery is moved around a lot.

Drywall screws

Always choose a nail that will ________________

Go through the thin piece of wood and almost through the thick piece of wood.

If you are nailing down something very thin, use ____________

All of the above (a brad nailer, a tack hammer, safety glasses)

When using long drywall screws, _____________ through the this piece of wood before installing the long drywall screw.

Drill