NET4009_Module 3b- Tshooting OSPFv3

What can the show ipv6 protocols command show?

1. the process ID (PID)
2. the router ID (RID)
3. the type of router
4. weather any areas are stub or NSSA
5. interfaces participating in the routing process
6. weather redistribution is occurring

What can the show ipv6 ospf command show?

1. the OSPFv3 PID
2. the RID
3. the type of router—ABR or ASBR—various timers and statistics
4. the number of areas on the router, and the type of area—normal, stub, or NSSA
5. the reference bandwidth
6. the parameters related to the different areas configured on the route

What command will be used to verify the LSAs that were collected and placed in the LSDB?

show ipv6 ospf database

Any parameter configured under the main router OSPFv3 configuration mode applies to which address families?

to all address families

if there are conflicts between configurations in router OSPFv3 configuration mode and AF configuration mode which is prioritized?

AF configuration mode wins

OSPFv3 AFs use what IP addressing to communicate routing information?

OSPFv3 AFs for both IPv4 and IPv6 use IPv6 messages to exchange routing information

classic OSPFv2 and the OSPFv3 AFs are compatible (True/False)

False

a router using OSPFv3 AFs for IPv4 does not peer with a router using the classic OSPFv2 configuration

True

To verify the IPv4 OSPFv3 entries in the routing table, use what command?

show ip route ospfv3

To verify the IPv6 OSPFv3 entries in the routing table, use which command?

show ipv6 route ospf