CUTTING PROCESS

Cutting Process

A process of cutting the laminated bars into monilithic sizes

Cutting Receiving → Trimming → Foam Taping → Cutting Work → Index Removal → Cutting Inspection → Defoaming → Chip Separation → Chip Counting

Cutting Process Sub Process

Cutting Receiving

A process of soring, stamping , arrangin, and conforming the quantity

Trimming

A process of clearing the expose index on all sides

Foam Taping

A process of putting a tape at the bottom of the laminated bar

UV Tape
VGF Tape
Haeun Tape

3 types of foam tape

Cutting Work

A process of cutting the laminated bar into uniform green chips

Index Removal

A process of removing the index side of the bar using puncher

Cutting Inspection

A process of Manually inspecting and removing all the defect unit after index removal

Defoaming

A process of removing the applied foam tape in the bar

Chip inspection

A process of separating of good chip and bad green chipsC

Chip Counting

A process of counting the total number of good green chips

Logic Ratio and Proportion

What is the counting chip logic

Weight total = Weight of samples chips / Total sample chips

Formula of counting chips

Process Standard
Work Standard
Equipment Standard
Material Handling Standard
Environment Standard

What are the 5 standard of cutting MPQA

Block Cutting

What do you call in which a defect comes from having a less accurate margin cut

Zirconia Powder

A material that is used to ensure the bars wont stick together

Folding points (3 fold)

Folding Points 3 folds
Length Inspection 2 fold
Bullet Inspection

What aare the three cutting visual bar inspection method

Length Inspection 2 fold

Bullet Inspection

25 Bars - Donolite machine

How many chips stack are in bullet inspection method