FURNITURE (NG)

750mm

Standard table height

450mm

Standard chair height

Dovetail

Strongest joinery used for cabinet drawer

Dovetail

Joinery for Premium Grade furniture

Anthropometrics

Body dimensions and its relation to its surrounding space

Scribe a line parallel to a reference edge or surface

Marking Gauge

Tool used to shave or cut corners

Miter Saw

Standard size of sandpaper

9 by 11 inches (23 by 28 cm)

Hammer is a

Lever

commonly determined by the diameter of its blade

Circular Saw

Lathe

“Father of all Hardware”

How to make wood fire resistant?

Impregnate the wood with fire-resistant chemicals to its core.

A type of plastic that, once cured or set, cannot be remelted or reshaped.

Thermosetting plastic

60 × 75 inches (1524 × 1905mm)

Queen Size Bed

Standard Pillow Size

20 × 26 inches (508 × 660mm)

Cutting wood along the grain

Rip Saw

Tanning

The process of treating animal skins and hides to produce leather.

The flat or slightly rounded striking surface of a hammer used to drive nails, strike chisels, or deliver blows to other objects.

Face

Edge to Edge and End to End

Two types of butt joint

Standard Size of a double bed

54 × 75 inches (1371.6 × 1905mm)

39 x 75 inches (990 × 1905mm)

Standard Size for a Single/Twins sized bed

8-14 inches (203.2 × 355.6mm)

Standard thickness of a mattress

King Size Bed

76 × 80 inches ( 1930.4 × 2032mm)

The age of a tree is commonly determined by its

Growth Rings

Spring used for premium furni- coil?

Pocket Springs

Head

The weight of the hammer is determined by the weight of the?

Try Plane

Jointer Plane

Two pieces of wood are joined at their ends to extend their length

end-to-end half-lap joint

After

Polyurethane is added (before, during, after) stain

Used to cut a hole in metal before drilling

Center punch

Centersink

Conical boring in wood to receive a screw head so that the surface of the screw is lower than the wood surface

Escutcheon

A fitting over a keyhole or the back plate of a handle.

The rough-sawn size of a piece of lumber usually slightly smaller than specified size

Nominal size

Savonarola

Italian Renaissance X-Shaped chair of interlacing curved slats and wooden back, carved or inlaid with certosina work

Bandsaw

A machine tool with endless blade that travels around two pulleys and is used to cut thin or thick stock in curve or straight form

Landrillo

It's the vernacular term for 'cement tile'

Router

This tool is a portable shaper that is moved over the work instead of the work being moved through the cutter as in the regular shaper

Palasan

The type of rattan with a stock diameter of atleast 25mm and usually used for the main structural part of ratan furniture

Buri

Largest palm in the Philippines reaching heights of 20 meters

Measurement of the maximum normal working arm for a person sitting at a desk

1400mm

Standard size of a plywood sheet

4 × 8 foot (1220 × 2440mm)

Mechanisms that hold cabinet or closet doors in an engaged position

Friction Catches

Maximum depth of a Senior Executive table

910mm

1400mm

Maximum width of a clerical table

Design technique most probably used by Arne Jacobsen for the Swan and Egg Chair

Molded plywood and foam upholstery

Screwdriver that relies on a pushing force rather than a twisting force

Spiral rachet

Radial arm saw

Machine Tool which is an upside-down saw with a teethed circular blade

A transparent plastic finish made of polyhydric alcohol

Polyurethane finish

Screwdriver that relies on To coat a metal, esp. aluminum or magnesium, with a hard, non-corrosive film by electrolytic or chemical action

Powder coating

Average stature of a standing filipino

1680mm

Which is not part of the given (no context)

Jigsaw

Methods of weaving for furniture