Anterior Lumbar

What is the INDEPENDENCE screw diameter

5.5 mm

What is the longest screw available in the ALIF Bone Screw Set

40 mm

INDEPENDENCE: Identify the number corresponding to the part that will retract the exposed hex on the attachment point of the ALIF Inserter/Distractor

2

INDEPENDENCE spacer is indicated for how many contiguous levels

2

INDEPENDENCE: How many mm is the posterior radiographic marker from the posterior edge

1.5 mm

INDEPENDENCE: the cephalad/caudal screw orientation is how many degrees

35

What are the sagittal profiles available with INDEPENDENCE

8, 15, 20 degrees

INDEPENDENCE: Identify the number corresponding to the variable angled screw

1

The INDEPENDENCE screws allows for how many degrees of conival variablity

5

T/F: INDEPENDENCE: The implant can’t be flipped, the one screw needs to be inserted into the inferior vertebrae

False

INDEPENDENCE: Which number corresponds to the implant with the correctly positioned self-centering sleeve

2

With the INDEPENDENCE medium spacers, what is the largest height available

21

What are the three INDEPENDENCE axial footprint options

24×30, 26×34, 29×39

T/F: INDEPENDENCE MIS: The spacer should always be implanted as fas posterior as possible so that the positive stop on the triple barrel anchor guide contacts the vertebrae

False

INDEPENDENCE MIS: How can you ensure an anchor is correctly loaded into the triple barrel anchor guide

Choices:

- Lay instrument flat on the table

- Use the laser marked anchor indicator as a guide to the anchor orientation

- Use your thumb to secure the anchor in instrument

- Confirm that a click was felt or heard

- Confirm that anchors are fully seated

All of the Above

T/F: INDEPENDENCE MIS: Each anchor is to be incrementally impacted one at a time, using fluoroscopy to monitor the advancement of each anchor

True

INDEPENDENCE MIS: The triple barrel anchor guide will not disengage from the spacer, what can you advise the surgeon to do

Choices:

- Confirm the Hex Driver is fully seated into the Threaded Rod hex hole

- Rotate Hex Driver counterclockwise while simultaneously withdrawing the instrument, gently rocking left/right as needed.

All of the Above

INDEPENDENCE MIS: If an Anchor needs to be removed from the spacer once implanted, what should you advise the surgeon before the removal?

Choices:

- Confirm that the set screw has been rotated to the open position

- Confirm that the Freehand Inserter is attached to the spacer

- Confirm that the Anchor Removal Tool is fully threaded into the Anchor

- Both 1 and 3

Both 1 and 3

Which of the following sets do you need to do a MAGNIFY-S case?

Choices:

- 9126.9101- MAGNIFY™-S Instrument Set

- 9126.9102- MAGNIFY™-S 25x31 Implant Set

- 9126.9103- MAGNIFY™-S 26x34 Implant Set

- 9126.9104- MAGNIFY™-S 29x39 Implant Set

- 925.905- ALIF Instrument Set

- 925.906- ALIF Trials

- 925.907- ALIF Bone Screws

- 925.901- Anterior Disc Prep I

- 925.902- Anterior Disc Prep II

- All of the above

All of the above

MAGNIFY-S: Select the inserter(s) that allow placement of screw(s) with inserter attached to implant

Choices:

- Midline Inserter

- Offset Inserter

- Lateral Inserter

offset inserter and lateral inserter

T/F: MAGNIFY-S: When contracting the implant DO NOT use excess torque as implant integrity can be compromised

True

MAGNIFY-S: How many revolutions of torque limiting hex driver will result in 1mm expansion

1.5 revolutions

MAGNIFY-S: Can you pack into bone screw holes

No

MAGNIFY-S: The midline inserter does not attach to implant if set screws are in

Locked position

Which of the following in MONUMENT approved for

Choices:

- MONUMENT is approved as a stand-alone interbody fusion device

- MONUMENT is approved as a vertebral body replacement device

- MONUMENT is approved as an interbody fusion device with supplemental fixation (i.e. pedicle screws, facet fixation) from L1-S1

- MONUMENT is approved for the thoracic spine

MONUMENT is approved as an interbody fusion device with supplemental fixation (i.e. pedicle screws, facet fixation) from L1-S1

Which of the following is MONUMENT approved for?

Choices:

- Up to Grade 1 spondylolisthesis

- Up to Grade 2 spondylolisthesis

- Up to Grade 3 spondylolisthesis

- Up to Grade 4 spondylolisthesis

- Up to Grade 5 spondylolisthesis

Up to Grade 2 spondylolisthesis

How many millimeters of translation can MONUMENT achieve

8 mm

MONUMENT: One complete revolution of the IMPLANT REDUCTION DRIVER is

0.5 mm

MONUMENT: The implant reduction driver has a _____ hex with ____ of torque

2.5 mm hex with 1.5Nm of torque