Studied by 0 people
Looks like no one added any tags here yet for you.
Which of the following part of H-Frame is the caster?
A
Which of the following part of H-Frame is the base Screw jack?
C
Which of the following part of H-Frame is the coupling pin?
C
Large construction equipment that can be driven by trucks or wheels, but trucks are more standard.
EXCAVATORS
A type of Auger that rotates to lift earth upward and remove it from the ground as the bit bores down. They are commonly used for boring holes for construction projects, similar to but more efficient than post-hole
diggers.
EARTH AUGER
What type of earth moving equipment was shown below?
EXCAVATORS
What type of earth moving equipment was shown below? It is considered one of the strongest and
most reliable heavy equipment used in the construction industry
BULLDOZERS
Earth moving equipment that are needed on almost every large job site. They offer limited function but perform the all-important task of moving and dumping many types of heavy material
DUMP TRUCKS
They are used when one needs to move materials up to great heights. They’re also very stable, easy to operate, and are recommended for work on multi-story commercial or residential
buildings.
TOWER CRANES
What type of lifting equipment was shown below?
FORKLIFTS
A lifting equipment that get a lot of work on the job site. Containing a cabin and tower, hoists lift and materials vertically. They are usually used when materials have to be lifted to a desired
height.
CONSTRUCTION HOISTS
They are lifts go up and down, with cross-brace supports, to a height up to sixty feet or less depending on the type. They are more common for indoor construction, with the disadvantage
being you can’t move the platform left and right.
SCISSOR LIFTS
This is one of the oldest and most common methods of building demolition and is typically used for concrete and other masonry structures.
WRECKING BALL DEMOLITION
The main purpose of this method of demolition is to recover the maximum amount of primarily reusable and secondary recyclable material in a safe and cost-effective procedure.
STRIP-OUT OPTION
A tough and strong but tend to be embrittled and become powdery on prolonged exposure to
sunlight.
NYLON
This adhesive is brush-applied to both components which are then united and slightly rotated to complete the seal. Curing is rapid but in cold water supply systems, water pressure should not be applied for several hours. it is solvent-based vinyl resin adhesives are used for bonding PVC-U and ABS pipes and fittings
PLASTIC PIPE ADHESIVE
