mod 10 dump

icao is a specialised agency of

the united nations

the heaquaters of icao are located in

Montreal Quebec canada

what is article 1 of the convention

every state has sovereignty over its airspace

what is article 2 of the convention

territory of the land and close waters

what is article 3 of the convention

convention applies to civil aircraft

police and military is state aircraft

state aircraft cant just fly over

rules for state aircraft must regard civil aircraft

what does the icao assembly consist off

all member states

how often does the assembly meet

every 3 years

what does the assembly do

decide budget

review work and discuss new policies

icao council is made up of how many states

36

the states are elected by the assembly to be part of the council every

3 years

what is the role of the icao council

to manage the daily basis at a eye level and follow the direction of the assembely

produce annual reports

a-point secretariats

what is the divisions of icao secretariats

there is 5

air nav bureau

air transport bureau

legal and external affairs bureau

technical co operations bureau

the bureau of admin and services

what does SARPS stands for

standard and recommended practices

standards are recognised as

mandatory and essential

under what article must member states notify if they cannot follow a standard

38

recommended practices are classed as what

desirable

how many states of the EU

28 ( 27 post brexit )

the European council defines the general political direction and priorities but cannot

pass law

the European parliament represents

EU citizens and is elected by them

the council of the European union represents

the governments of the individual states and defend there national interests

the European commission represents

the intrest of the EU as a whole

the eu decision making procedure is know as

ordinary legislative procedure (ex co-decision)

decision making at the EU involves

European parliament

council of the European union

European commission

EU law is divided into

primary and secondary legislation

primary legislation includes

treaties that are the basis and ground rules for all EU actions

secondary law includes

regulations directives and decisions derived from principles and objectives set out from the treaties

regulations are binding for

all of the EU

decisions are binding for

whom it is addressed to and EU country or individual company

the common rules for civil aviation that replaced 215/2008 is

2018/1139

commission regulation 748/2012 implements the rules for

initial airworthiness, parts, products and design and production organization’s

commission regulatorn 1321/2014 consits

continuing airworthiness of aircraft and aeronautical products parts appliance and the approval of organizations and personal

what is the mission of EASA

to promote the highest common standards of safety and enviromental protection in civil aviation

EASA includes how many members

28 (27 after brexit)

4 non eu members

island Norway Switzerland and litchinstine

aircraft is defined as

any machine that can derive support in the atmosphere from the reactions of the air other than the reactions of the air against the airs surface

product shall mean

aircraft, engine, propeller

parts and appliances shall mean

any instrument, equipment mechanism apparatus appurtenance software or accessory including comms

easa member states has a NAA and is known as

Competent authority

initial airworthiness 748/2012 annex 1 is

part-21

continuing airworthiness 1321/2014 annex 1

part m

continuing airworthiness 1321/2014 annex 2

part 145

continuing airworthiness 1321/2014 annex 3

part-66

continuing airworthiness 1321/2014 annex 4

part-147

continuing airworthiness 1321/2014 annex 5

part-t

for members to apply the basic regulations and rules in the certification process what 3 things does easa use

CS AMC and GM

acceptable means of compliance serves as means by which

rules can be met by the applicant that a equivalent

guidance material is developed as

a guide to provide additional explanation to asist in implementing the rules

what document for latest updated rules for continuing airworthiness inc part 66

easy access rules

cat A permits

crs for minor scheduled line maintenance and simple defect rectification personally performed

what are the cat a sub categories

a1- aeroplane turbine

a2- aeroplane piston

a3-helicopter turbine

a4 helicopter piston

what can a b1 holder do

crs maintenance performed on aircraft structure powerplant and mechanical and electrical systems simple av test no troubleshooting

b1 includes the subcategory

A

b1 subcategories include

b1.1- aeroplane turbine

b1.2- aeroplane piston

b1.3-helicopter turbine

b1.4 helicopter piston

b2 can sign for

avionic and electrical systems and simple test on powerplant and mechanical

does a b2 include any A subcategory

no

b3 has the same privilages as b1 but with what limitations

piston engine non pressured of 2000kg MOTW and below

does the b3 licence have a A subcategory

no

cat C licence shall permit the holder to issue crs after

base maintenance in its entirety

b2L is applicable to all aircraft other than

group 1

what are the b2L system ratings

com/nav

instruments

auto-flight

surveillance

airframe systems

while holding a b2L licence with airframe systems rating this allows

performing electrical and avionics work on the power plant and mechanical test requiring simple test

a b2L must contain a minimum of 1 system rating but does not include any

A subcategory

cat L applies to

group 4 aircraft ( light ELA1(1200kg) ELA2(2000kg) aircraft

category L shall permit the holder to issue crs and act as support staff for the following

aircraft structure powerplant and mechanical and electrical systems

AML shall be made on an

EASA form 19

AML applicant shall be at least what age

18

AML is valid for how many years

5

part 145 in a member state who is responsible as the competent authority

the member state

part 145 in third state country who is responsible as the competent authority

EASA

certifying staff must stay current by having experience of

6 months in 2 years

continuation training happens every

2 years including up to date knowledge procedures and human factors

all necessary equipment, tools and materials to perfrom approved scope of work must be

available

the organisation must ensure that tools equipment and test equipment are

controlled and calibrated

records for calibrations are kept for

traceability

unserviceable components must be kept

separated

unsalvageable components at the end of life or not repairable must be

quarantined or mutilated

raw and consumable materials shall be kept in conformity as

the specification statement

standard parts like nuts and bolts can be found in the

IPC

the organisation shall report to

the competent authority

state of Registry

DOA/ TC/STC HOLDER

reports should happen asap but within

72hrs

the MOE must be approved by

the competent authority

what is the MOE

the MOE is a detailed document that describes structure procedure and responsibility and operating methods of the organisation

in a part 145 what is a level 1 finding

lowers safety standards and hazards to seriously to the flight safety

in a part 145 what is a level 2 finding

possible hazard to flight safety

regulation 965/2012 replaced

859/2008 known as EU-OPS REG

EU-OPS has been transitioned to

JAR-OPS

AOC (air operators certificate) authorises the operator to

carry out specified commercial air transport operations (icao annex 6)

AOC specifies what 9 things

name and location of operator

date of issue

description of the type of operations

types of aircraft

reg markings inc airplanes operating under its AOC

authorised areas of operation

special limitations

special authorisations/approvals e.g CAT II/CAT III ETOPS DG RNAV RVSM MNPS

PDI must be done only by

pilot in command

the operator shall report to the competent authority and to any other organisation required by the state of the operator informed any

accident, serious incident and occurrence,

the operator shall report to the competent authority and to the design organisation any

incident, malfunction, technical defect, exceeding technical limitations

reports shall be made in a form and manner established by the

competent authority

what documents must be carried on board * important

aircraft flight manual

original certificate of airworthiness*

journey log

MEL or CDL

information on aircraft placards and markings can be found in what documents

OPS

annex 7

CS-23/25/27/29

AMM chapter 11

heavier than air aircraft reg marks must shown at least

3 + 1 (external plus plate)

part 21 is annex 1 of what regulation

748/2012 initial airworthiness

part 21 describes criteria for

design and production maintenance and quality management

part 21 includes 2 sections

section A - technical requirements for personnel

section B - procedures fo authorities

what is part 21 subpart F

production without organisation approval

what is part 21 subpart G

production organisation approval

what is part 21 subpart J

design organisation approval