GMU SKILLS EXAM COMMANDS MEM

enter EXEC mode

enable

Enter Configuration Mode

conf t

Change switch name to S1

hostname S1

Prevent the switch from attempting to translate incorrectly entered commands as though they were hostnames, disable the DNS lookup

no ip domain-lookup

prevent unauthorized access to the switch, configure passwords

secret password: class
regular password: cisco

enable secret class
line con 0
password cisco
login
exit

Configure and enable the SVI according to the Addressing table

VLAN1
192.168.1.1
255.255.255.0

int vlan1
ip addr 192.168.1.1 255.255.255.0
no shut
exit

enter a login MOTD banner to warn about unauthorized access

banner motd #

Save the configuration

wr

enable ipv6 unicast routing

ipv6 unicast-routing

configure and enable the G0/0/0 according to Addressing Table
ip address : 192.168.1.254 255.255.255.0
ipv6 address : 2001:DB8:ACAD:1::254
subnet : 64

int gigabitEthernet 0/0/0
ip addr 192.168.1.254 255.255.255.0
ipv6 addr 2001:DB8:ACAD:1::254/64
no shut
exit

command on Windows to show all connections

ipconfig /all

command to display the IOS version that the switch is running and other useful information

show version

display status of the connected interfaces on S1

show ip int br

display switch mac address table

show mac-address-table

command that displays the entire running configuration, one page at a time

show running-config

display status of the connected interfaces (ipv6) on S1

show ipv6 int br

what do you put before any show if you are in exec mode with conf mode

do

if you need help with a command, what do you put

?

how do you see the clock?

show clock

how would you set the clock to 3pm

clock set 15:00:00

how would you set the clock to 3pm with a date of “Jan 31 2035”

clock set 15:00:00 31 Jan 2035