Studied by 1 person
Metal rule
To measure and mark out distances
4 Workshop safety rules
All loose hair and clothing must be tucked in, Goggles must be worn when operating machinery, Only one person is allowed to operate an item of machinery at any one time and The person using the tools and machinery is responsible for their own safety when using them
Strip heater
To shape sheet plastic by heating and bending it
What is this?
Pillar drill
File
To shape metal, plastic & wood
Drill bit
To create holes in wood, plastic & metal
What is this?
Belt sander
Try square
To check 90 degrees angles on wood and mark out straight lines on wood at 90 degrees to the edge
Jack plane
To shape wood
Bench Hook
To support the wood when cutting with a tenon saw
Tenon saw
To cut straight lines in wood
What is this?
Vacuum Forming machine
Countersink
To create a chamfered hole in wood and plastic to enable the head of a screw to sit level with the surface of the material.
Note 
Flashcard (40)