RSLinx /// Remote I/O

Demonstrate the ability to backup and restore a RSLinx configuration file

-          Use the built In restore / backup utility

-          When the utility window pops up select backup

-          Choose the destination, name the file, and save.

-          Click Ok when it displays operation complete.

-          To restore use the same utility pop up and select Restore.

Demonstrate the ability to configure an Ethernet driver using RSLinx

-          Using the WhoActive system, select the communications tab at the top. And select configure drivers

-          Select the driver types

-          Click “add new”, give the driver a name and click “OK”.

-          Select your pc’s physical network card from the dropdown list, then click “apply” and “OK”.

-          Your drivers status should say running.

Explain what RIO is and identify some of it's uses

-          It is Remote I/O, its main use is to save money on wire. By running one ling com. Instead of multiple signal wires to and from the I/O cards.

Explain some advantages and disadvantages of using RIO

-          Advantages = Cost savings, easier trouble shooting, and Isolation of equipment.

-          Disadvantages = its slower, all data must be processed more times before computing.

Why is RIO so much slower than extended local (in terms of the type of connection)?

-          Extended is wired into the back plain

-          Remote is connected over network

Identify components of a Flex I/0 system

-          Power supply, communication card, Modules, bases

Identify I/0 Modules functions and application usages

-          The Same as I/O cards on plc racks. To send and receive signals.

Demonstrate troubleshooting Power Supplies & modules / Comm. using LED status lights

-          Same as 1756 racks.

Identify at least 3 devices that may be connected to a PLC via RIO

-          Thor surge tank drain valve

-          Nitrogen valve

-          Pump to lines