Personal Protective Equipment and Tools Inventory

Safety goggles/ glasses

Used for eye protection. Found in the red cabinet in the tool room, top right side.

Face shield

Used to protect face from debris, still need safety glasses. Found in the tool room, back wall.

Ear plugs

Used for hearing protection. Found in the tool room, back wall, top shelf.

Particle Mask

Used to protect you from breathing particles not fumes. Found in paint area in tall cabinet.

Fume mask

Used to protect you from specific fumes. Found in the office above the stereo.

Tape measure

Used for measurements. Found in office below the calendar.

Carpenter square

Used to draw straight lines and angles. Found in tool room, pegboard on the left.

Bubble level

Used to ensure something is level. Found in tool room on big pegboard.

Chalk line

Used to mark lines across long distances. Found in tool room on left pegboard.

Square

Used to square materials. Found in tool room, left pegboard, high.

Ratchet and Sockets

Used to tighten bolts. Found in Tool Room, left pegboard.

Combination wrench

Used to tighten bolts with one open end and one socket end. Found in tool room above ratchets.

Adjustable wrench

Used for tightening bolts when using many different sizes. Found on pegboard in tool room with other wrenches.

Screw drivers

Square drive, Phillips, flathead. Used for driving screws. Found in tool room, left pegboard, low.

Slip pliers

Used for grabbing versatility. Found in tool room left pegboard, low.

Needle Nose pliers

Used for wires and tight spaces. Found in tool room, left pegboard, low.

Channel lock

Large and adjustable locks for holding pipes, glue bottles, etc. Found on big pegboard behind chop saw.

Linemen's pliers

Used for larger wires and cables. Found on left pegboard, low.

End nippers

Used for nipping ends of staples and nails. Found on left pegboard, low.

Hand saw

Crosscut teeth for cutting against grain, rip teeth for cutting with grain. Found on big pegboard behind chop saw.

Hacksaw

Saw with interchangeable blade meant primarily for cutting metal. Found on big pegboard behind chop saw.

Twist bit

Drill bit meant for making holes. Found in drillbit drawer above screw guns.

Flat bit

Used for making holes while using less material in the bit itself. Found in drillbit drawer.

Forestner bit

Meant for drilling flat bottom holes. Found in office.

Hole saw

Meant for larger holes and utilizes blade around a twist bit. Found in tool room, right of screw guns.