CompTIA Network+: Chap. 10- Routing Protocols

Which of the following protocols support VLSM, summarization, and discontiguous networking? (3)

-EIGRP

-OSPF

-RIPv2

Which of the following are considered distance vector routing protocols? (2)

-RIP

-RIPv2

Which of the following are considered link state routing protocols? (2)

-OSPF

-IS-IS

Which of the following is considered a hybrid routing protocols? (2)

-BGP

-EIGRP

Why would you want to use dynamic routing protocol instead of using static routes?

Dynamic routing scales to larger networks

Which of the following is vendor-specific FHRP protocol?

HSRP

RIP has a long convergence time and users have been complaining of response time when a router goes down and RIP has to reconverge. Which can you implement to improve convergence time on the network?

Update RIP to OSPF using link state

What is the administrative distance of OSPF?

110

Which of the following protocols will advertise routed IPv6 networks?

RIPng

What is the difference between static and dynamic routing?

Dynamic routes are added automatically

Which routing protocol has a maximum hop count of 15?

RIPv1

Which of the following describes routing convergence time?

The time required by protocols to updates their forwarding tables after changes have occurred

What routing protocol is typically used to connect ASs on the internet?

BGP

RIPv2 sends out its routing table every 30 seconds just like RIPv1, but it does so more efficiently. What type of transmission does RIPv2 use to accomplish this task?

A. Broadcasts

B. Multicasts

C. Telecast

D. None of the above

None of the above

Which routing protocols have an administrative distance of 120? (2)

-RIPv1

-RIPv2

Which of the following routing protocols uses AS-Path as one of the methods to build the routing tables?

BGP

Which IPv6 routing protocol uses UDP port 521?

RIPng

What EIGRP information is held in RAM and maintained through the usage of hello and update packets?

-Neighbor table

-Topology table

Which is true regarding EIGRP successor routes?

A successor route is used by EIGRP to forward traffic to a destination.

Which of the following uses only hop count as a metric to find the best path to remote network?

RIP