TLE

Solid figures

________ have three dimensions and curved surfaces and can roll.

Self leveling laser It

________ is used to set up foundations and to retain walls and patios.

Guards

________ are provided to protect the operator and others from hazardous materials while using these tools.

Polygons

________ are classified according to the number of sides that they have.

Wooden block

________- It serves as a guide for all of the bricks in a given work area.

Plumb bob

________- It is used to check the correct alignment of a structure vertically.

Scaffolds

________ must be used when working on higher or elevated grounds to ensure a safer and more efficient workplace.

\
Measuring box-

Measuring box- It is a box used to measure the ________ and sand.

Cement

________ a chemical combination of calcium, silicon, aluminum, iron, and other ingredients, such as limestone, shells, and chalk made of silica or iron ore. Area Square units denoted by a superscript number 2, is the unit of measurement used to express the space covered of a two- dimensional object.

Measurement

________ One of the reasons why there is a need to measure a particular object or structure is to help determine the amount or the materials needed for a Certain piece of work.

Shapes

________ are found in all architectural designs.

Volume

________ refers to the space covered of a three- dimensional object in an enclosed area.

\
Concrete Board or plywood

Board or plywood used as scaffolds and folds and supports ________ hollow blocks (CHB)- with standard size of 16 inches long and 8 inches wide; used as substitute for bricks in masonry Reinforcing steel bars (kabilya)- used to strengthen concrete structures.

Full steel tape

________- It is a measuring device made of steel fixed in a reeled housing.

Plane figures

________ are made up of three or more closed line segments or polygons.

Folding wooden rule

It measures 2 to 3 feet long and has joints that can be folded to fit in the pocket

Brick mason's line

It is used for marking brick courses or horizontal rows of bricks

Chalk line

It is used as a marking tool for drawing a straight line

Framing square

It is used to check the accuracy of the corners of two perpendicular surfaces

Level hose with water

It is used to check the correct alignment of a structure horizontally

Concrete hollow blocks (CHB)

with standard size of 16 inches long and 8 inches wide; used as substitute for bricks in masonry

Reinforcing steel bars (kabilya)

used to strengthen concrete structures.

Area Square units

denoted by a superscript number 2, is the unit of measurement used to express the space covered of a two-dimensional object.

Polygons

are classified according to the number of sides that they have.

Hand tools

It means that these tools are used manually.