1/24
Looks like no tags are added yet.
Name | Mastery | Learn | Test | Matching | Spaced | Call with Kai | Chat |
|---|
No analytics yet
Send a link to your students to track their progress
What RPM does the APU operate at?
C. 100% constant speed
Why does an APU not require a CSD?
C. It already runs at constant speed
What is used to start an APU?
B. Battery (and often a DC fuel pump)
What does a DC alternator actually produce?
B. AC that is rectified to DC
What component converts AC to DC in an alternator?
C. Diodes
How many diodes are typically used in a DC alternator?
C. 4
Which of the following is NOT part of a DC alternator?
C. Commutator
In a DC alternator, the rotor is the:
C. Field
In a DC alternator, current is induced in the:
B. Stator
Light aircraft DC alternators use what type of field?
C. Rotating field
If a small aircraft needs AC power from a DC system, it uses a:
C. Inverter
What does a voltage regulator control in an alternator?
B. Varying field circuit resistance
What provides initial excitation to the alternator field?
B. Battery
The Generator Control Unit (GCU) includes:
C. Regulator, cutout relay, and current limiter
How is loss of residual magnetism corrected?
C. Flashing the field
Adjusting multiple generators to share load equally is called:
C. Paralleling
What is the function of a resistor in the field circuit?
B. Decrease current
A generator producing only 2–3 volts likely has:
D. All of the above
A generator must produce what relative to battery voltage?
C. Higher
The rotating part of a DC generator is the:
C. Armature
A generator repeatedly tripping offline is most likely due to:
C. Low output voltage
What device disconnects a generator when output is too low?
C. Reverse current relay
A commutator is used to produce:
B. DC
Slip rings are used in:
B. AC generation
Standard AC frequency in large turbine aircraft is:
C. 400 Hz