UK Practical Driving Test

Show me / Tell me Questions & Answers

Q: How would you check that the brakes are working before starting a journey?

A: Brakes should not feel spongy or slack. Test them as you set off. Vehicle should not pull to one side.

Q: Where would you find the information for recommended tyre pressures and how should they be checked?

A: In the manufacturer’s guide. Use a reliable pressure gauge, check and adjust when tyres are cold, include the spare tyre, and refit valve caps.

Q: How do you make sure your head restraint is correctly adjusted?

A: The rigid part should be at least as high as the eyes or top of ears and close to the back of the head. Some restraints may not be adjustable.

Q: How would you check tyres for sufficient tread depth and safety?

A: No cuts or bulges. Minimum 1.6mm tread depth across the central three-quarters of the tyre and around the entire circumference.

Q: How would you check that headlights and taillights are working?

A: Turn on the ignition and operate the light switch. Walk around the vehicle to ensure all lights are functioning, including indicators and brake lights.

Q: How would you know if there’s a problem with the anti-lock braking system?

A: A warning light will illuminate if there’s a fault.

Q: How would you check that direction indicators are working?

A: Operate the switch (turn on ignition if needed), then walk around the vehicle.

Q: How would you check that brake lights are working?

A: Press the brake pedal and use reflections or ask someone to help.

Q: How would you check power-assisted steering is working?

A: Gentle pressure on the wheel while starting the engine should cause movement. Alternatively, check just after moving off.

Q: How would you switch on rear fog lights and when would you use them?

A: Operate the switch (with dipped headlights and ignition on if needed), check warning light. Use when visibility is seriously reduced.

Q: How do you switch headlights from dipped to main beam and know it’s on?

A: Operate the switch (with ignition on if needed), check the main beam warning light.

Q: How would you check engine oil level?

A: Identify dipstick, check oil level against min/max markers.

Q: How would you check engine coolant level?

A: Identify high/low markings on header tank or radiator cap, describe topping up.

Q: How would you check hydraulic brake fluid level?

A: Identify reservoir, check level against high/low markings.

ew

g

Show me how to wash and clean the rear windscreen.

Show me how to wash and clean the front windscreen.

Show me how to switch on dipped headlights.

Show me how to set the rear demister.

Show me how to operate the horn.

Show me how to demist the front windscreen.

Show me how to open and close the side window.