2.7 Module Quiz - attempt 5 - score 63 percent

Which combination correctly represents the three elements of the fire triangle?

Oxygen, heat, and fuel

Which of the following cable standards are F-type connectors typically used with? (Select two.)

RG-6

RG-59

Which combination correctly represents the three elements of the fire triangle?

Oxygen, heat, and fuel

Which of the following cable standards are F-type connectors typically used with? (Select two.)

RG-6

RG-59

Which configuration allows a switch to be installed with ports facing the front of the rack, potentially improving cable management scenarios?

Port-side intake

Which of the following are requirements for fire-retardant plenum cable? (Select two.)

Must not emit large amounts of smoke when burned

Must be self-extinguishing

You are setting up a security system for a small retail store, which includes several security cameras both inside and outside the store. The cameras will be connected to a central monitoring system located in the store's office.

Due to the layout of the store, the cables connecting the cameras to the monitoring system will need to be routed through tight spaces and around several corners.

Given the scenario, which type of cable would be MOST appropriate for connecting the security cameras to the central monitoring system?

RG-59 coax cable

A network administrator is evaluating the current network infrastructure of a medium-sized enterprise to determine the feasibility of upgrading to a higher-speed network to support increasing demands for data transfer within the company. The existing network primarily consists of Cat 5e cabling and switches.

The administrator needs to decide between upgrading to Gigabit Ethernet or jumping straight to 10 Gigabit Ethernet (10 GbE) to future-proof the network. The company's operations involve moderate to high data transfer needs, including regular large file transfers and video conferencing.

Given the existing infrastructure and company needs, what should the network administrator consider as the MOST critical factor in making this decision?

The cost of installing new cabling and equipment

You are a network technician tasked with setting up a new office network. The office is part of a larger corporation that has standardized on the T568B termination standard for all Ethernet cabling to ensure uniformity across its locations.

While installing new Ethernet cables, you notice that some pre-existing cables in the office are terminated according to the T568A standard.

What should you do to ensure network compatibility and adherence to the corporation's standards?

Re-terminate all existing T568A cables to match the T568B standard.

Which of the following is NOT a typical use of MPO cables?

Field termination of fiber optic cables

Which of the following are components of a structured cabling scheme? (Select three.)

Work Area

Telecommunications Room

Horizontal Cabling

A technology company is planning to connect two of its buildings located 2 kilometers apart. The connection is intended for high-speed data transfer of large files and real-time data processing. The company is evaluating whether to use Single Mode Fiber (SMF) or Multimode Fiber (MMF) for this purpose.

Considering the distance and the requirements, which type of fiber should the company use?

Single Mode Fiber (SMF)

Why are permanent cables run through conduit in a fiber optic cabling installation?

To protect the cables from physical damage and environmental factors