1/24
Looks like no tags are added yet.
Name | Mastery | Learn | Test | Matching | Spaced | Call with Kai | Chat |
|---|
No analytics yet
Send a link to your students to track their progress
What are the three types of anti collision lights?
Strobe, rotating beacon, and high-intensity LED
What part of a high-intensity LED is colored?
The housing
What is ATA 2200?
The number code of different systems on an aircraft
What is the ATA code for lighting?
33
What color is the tail position light?
White
What color is the left wing navigation light?
Red
What color is the right wing navigation light?
Green
Were should circuit breaker be located?
As close to the bus as possible
Where should the instrument panel lights be mounted?
Behind or to the side of the instruments
How often do anti-collision lights flash on and off?
40 to 100 cycles a minute
What does BITE stand for?
Built-in test equipment
What is the threshold for an electrical component to be considered intermittent?
It's active for two minutes or less
What type of gas is used in a strobe light?
Xenon
How are navigation lights wired?
In series with a switch and in parallel with each other
How many position lights are required?
Three
What is a squat switch?
A pressure sensor that determines if the plane is on the ground or not
What are static wicks?
They dissipate static electricity off of a plane
What device is used to test fiber optics?
OTDR, optical time domain reflectometer
How must electrical components be wired?
In parallel
What is the bulb of a strobe light made of?
Glass or quartz
What type of instructions can be found in the 43.13?
General ones rather than specific
Strobe lights, use _____ pressure gas and landing lights use _____ pressure gas
Low, high
What does LED stand for?
Light emitting diode
What does EWIS stand for?
Electrical wiring interconnect system
What is the difference between landing lights and taxi lights?
Landing lights are typically found on the wings and taxi lights are typically found on the main landing gear strut